Hi. I found another old Dockstar while cleaning up. Unfortunately, the dockstar no longer boots. So I have set up a USB stick with Debian. Unfortunately, there are also problems with the start. U-Boot 2017.07-tld-1 (Oct 24 2017 - 22:32:36 -0700) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: sby droidbox - Debian
That was hard work. Now everything works as it should. Tank you very much for your help. droidboxby droidbox - Debian
Hi bodhi, thanks for your help, but it doesn't run. Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 DockStar> printenv arcNumber=2998 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootarby droidbox - Debian
Hi Bodhi, after the U-Boot upgrade, the error is the same. Please take a look to the attachment. Can you help? droidboxby droidbox - Debian
# dmesg | grep -i 'bad' [ 12.300441] Scanning device for bad blocks [ 12.330231] Bad eraseblock 336 at 0x000002a00000 [ 12.440423] Bad eraseblock 1721 at 0x00000d720000 [ 12.450073] Bad eraseblock 1786 at 0x00000df40000by droidbox - Debian
Okay, Arch Linux run now. Can i now update uboot with this thread to boot with the debian stick? droidboxby droidbox - Debian
Hmm. Aerch Linux doesnt start U-Boot 2014.04.R2-1 (May 15 2014 - 14:35:47) Arch Linux ARM Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for dby droidbox - Debian
When i install on another USB stick Archlinux and i update uboot with this thread can i then boot with my debian stick? droidboxby droidbox - Debian
Okay. I write in /boot/uEnv.txt console=ttyS0,115200 uimage=/boot/uImage initrd=/boot/uInitrd fdt_file=/boot/dts/kirkwood-dockstar.dtb fdt_addr=0x1c00000 uimage_addr=0x800000 initrd_addr=0x1100000 loadfdt=ext2load ${type} ${disk}:1 ${fdt_addr} ${fdt_file} loaduimage=ext2load ${type} ${disk}:1 ${uimage_addr} ${uimage} loaduinitrd=ext2load ${type} ${disk}:1 ${initrd_addr} ${initrd} seby droidbox - Debian
Sorry bodhi, i don't understand it. This are the uEnv console=ttyS0,115200 uimage=/boot/uImage initrd=/boot/uInitrd fdt_file=/boot/dts/kirkwood-dockstar.dtb fdt_addr=0x1c00000 uimage_addr=0x800000 initrd_addr=0x1100000 loadfdt=ext2load ${type} ${disk}:1 ${fdt_addr} ${fdt_file} loaduimage=ext2load ${type} ${disk}:1 ${uimage_addr} ${uimage} loaduinitrd=ext2load ${type} ${disk}:1by droidbox - Debian
After broken my USB Stick, i install Debian on a new USB Stick. But it does not start. Can someone help me? The error message: [ 3.222532] hctosys: unable to open rtc device (rtc0) [ 3.229064] Waiting 10 sec before mounting root device... [ 13.240761] VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6 [ 13.248109] Please append a correct "root=&quby droidbox - Debian
Hey bodhi, root@debian:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "uImage" mtd2: 02000000 00020000 "rootfs" mtd3: 05b00000 00020000 "data" root@debian:~# less /etc/fw_env.config -bash: less: command not found root@debian:~# cat /etc/fw_env.config # Configuration file for fw_(prinby droidbox - uBoot
Okay and the next test with cp -a zImage-3.17.0-kirkwood-tld-1 zImage.fdt cat dts/kirkwood-goflexnet.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-3.17.0-kirkwood-tld-1 -d /boot/zImage.fdt /boot/uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-3.17.0-kirkwood-tld-1 -d /boot/initrd.img-3.17.0-kby droidbox - uBoot
Hi, i have install the 3.17 kernel on my booting debian stick. now i see this message WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus fby droidbox - uBoot
Hi, here the output SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB NAND read from offset c0000 failed -74 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1by droidbox - uBoot
Hi Bodhi, thanks a lot. I test it at the next weekend. droidboxby droidbox - uBoot
Hey bodhi. I have run on a new Pogoplug the follow steps setenv ipaddr 192.168.100.248 setenv serverip 192.168.100.113 tftp 0x800000 uboot.mtd0.kwb-2011.12-pogo_e02-L2Coff go 0x800200 ## Ergebnis muss so aussehen ## Load address: 0x800000 ## Loading: ################################################################# ## ##############################by droidbox - uBoot
Hey bodhi. U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> printenv arcNumber=2097 baudrate=115by droidbox - uBoot
Hi Bodhi. This is really nice. Thank you very much in advance. droidboxby droidbox - uBoot
Hi, my second Pogo has this Error: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> saveenvby droidbox - uBoot
Nice. The pogoplug runs. Thank you very much. I take a new threath with a bad block error on another plug. droidboxby droidbox - uBoot
Hey bodi, thanks for your answer. I read the guide, but it is for a Pogo V4/Mobile Device. I have a Pogoplug E02. It is right? droidboxby droidbox - uBoot
u-boot>> printenv arcNumber=3542 baudrate=115200 bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset bootdelay=5 console=ttyS0,115200 ethact=egiga0 ethaddr=02:50:43:e6:fc:df if_netconsole=ping $serverip ipaddr=192.168.178.61 machid=dd6 preboot=run if_netconsole start_netconsole serverip=192.168by droidbox - uBoot
Hi everyone, after some hacks on the uboot i have the following problem: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPortsby droidbox - uBoot