I attached the photo of these two chips,you can see my attached files. The sata port I will get a try later.Thanks.by wacke - Debian
Hi bodhi, I've treid the debian,and here is the boot log: Sheevaplug> boot starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048by wacke - Debian
I've tried the new uboot,and the 88e1116 port don't work(the port led is on,but ping faild). I can't create the Debian rootfs on a USB drive,because there is no "initramfs-4.2.0-kirkwood-tld-1" in the "linux-4.2.0-kirkwood-tld-1-bodhi.tar.bz2",and i don't have Debian on my pc.(or if you can tell me how to compile the rootfs,i'll compile it myself).by wacke - Debian
I've tried uboot.2015.10-tld-1.sheevaplug.mtd0.kwb,still no lucky,can't flash to the NAND,won't boot. And I tried this uboot with openjtag,set the ipaddr and serverip,still can't ping any ip,shows ping failed(88E1116 is the wan port,aux port is in the 88E6161 Switch chip). When I follow the instruction to create USB Debian rootfs,I can't find the "initrd.img-4.by wacke - Debian
Hi bodhi, 1. The serial console log was all I have,the stock os was just made this by the O.E.M(I think). 2. sda1 is the uImage partition(monted as /boot in stock os) 3. The ping output: MB302>> ping 192.168.1.2 Using egiga0 device host 192.168.1.2 is alive And the pri output: MB302>> pri bootdelay=5 baudrate=9600 loads_echo=0 rootpath=/mnt/ARM_FS/ netmask=255.255.25by wacke - Debian
I've back to the stock. Here is the serial console output: __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |__by wacke - Debian
I tried uboot.2014.07-tld-2.sheevaplug.mtd0.kwb,still need remove data from head,and can run in ram.and also can't ping any ip when I set the ipaddr and ethaddr. But all these images can't flash to NAND,won't boot at all(even I tried add data from nand-dump).Is there anyway to skip or crack the uboot CRC(I think)?by wacke - Debian
With the openjtag,I tried the sheevaplug uboot from openwrt trunk openrt sheevaplug uboot And here is the log(run only from ram with resume command): U-Boot 2014.10 (Nov 08 2015 - 02:48:12) Marvell-Sheevaplug SoC: Kirkwood 88F6281_A1 DRAM: 512 MiB WARNING: Caches not enabled NAND: 64 MiB MMC: MVEBU_MMC: 0 *** Warning - bad CRC, using default environment In: serial Outby wacke - Debian
Uart booting don't work,and I tried new u-boot images with openjtag,both NSA320,Sheevaplug uboot,no serial console output at all.by wacke - Debian
Hi bodhi, I'v got my device back,and I tried NSA320,Sheevaplug uboot,but no lucky,there was no serial console output at all. Is there any way to get new uboot work then(by modify uboot source code)? And I recompiled the openwrt kernel(modifed dts file),the kernel boot log: Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.3.0 (Waby wacke - Debian
I have compiled the kernel with "NET_DSA_MV88E6123_61_65" config,but the kernel boot log shows this: platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferralby wacke - Debian
Thanks reply. How to find the ethernet chip definition and add to the dts file? I'm not good at source code.by wacke - Debian
Thanks for reply. I have tried the uboot.2014.07-tld-4.nsa310s.bodhi.tar u-boot img,and bricked,waiting for openjtag to get it back. I want to boot latest openwrt with 3.18+ kernel(compile from source myself), the kernel booted,but the 88E6161 switch chip driver dosen't work,is it must get u-boot with FDT support?by wacke - Debian
Thanks for your reply. My device is QiZhiTong 501m v2,and it's an OEM Model.I have attched picture of this model. info of this model : CPU:1.2 GHz ARM Marvell 88F6281 Memory:64M NAND Flash,512M DDR2 800 Storage:SDx1,SATAx1,USB 2.0x2 Network:88E6161 Switch chip with 5 gigabit port,88E1116 with 1 gigabit aux port I have tried UART boot,but not work.by wacke - Debian
below is the screen output: __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/by wacke - Debian