Hi. The problem is that i do not have original u-boot and i can't find u-boot output from ix4-200d anywhere (ix2-200 available). Latest news: i compiled sources and get some images. After test i found image that suits device best (u-boot-rd88f6281a_400rd_nand.bin). I also installed linux as described here All seems to be working except some issues: I see only one network card (should beby vasichkin - uBoot
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVby vasichkin - uBoot
I've got luck to compile U-boot from here (GPL sources) It contains modified sources of u-boot 1.1.4. I was able to load compiled u-boot, but it still reports less RAM than i have (128 instead of 512). u-boot booting log differs from image to image (less or more informative). Original one is not informative at all. I'll post it later.by vasichkin - uBoot
bodhi Wrote: > What you should do is Google for the patch, i.e. > board file. If you can find an old version of the > patch, I will then retrofit it for current U-Boot. > Without some starting point, it will be quite time > consuming to create a new patch. I'm afraid I > don't have enough free time to do that! Hi. Thank you for your attention. Here what i fby vasichkin - uBoot
Hi. I have Iomega ix4-200d device. I've just broke original u-boot and now playing with device. I write u-boot from similar device and able to boot via uart and console. I have hardware issues (wrong memory reported, may-be other). I tested images you provide and device loads it via uart. But, they all had non-compatible hardware hardcoded, i think. Here some info i've found: it&by vasichkin - uBoot