Thanks for the quick fix. Works like a charm on my GoflexNet.by SuperVirus - uBoot
Hi bodhi, thank you for your uBoot builds for the GoFlexNet! I've a problem with this new version (2013.10-tld-2) - the older 2013.10 was ok. It gives very much (debug?) output while using the SATA ports. E.g: ide_outb (dev= 0, port= 0x108, val= 0x01) : @ 0xf1082108 ide_inb (dev= 0, port= 0x11c) : @ 0xf108211c -> 0x58 ... Is it possible to turn it off? ext2ls is nearly uby SuperVirus - uBoot
Hello, there seems to be a little problem with the GoFlex SATA support: The SATA drive on port 0 is detected on port 0 and on port 1. It doesn't matter, if a second SATA drive is connected or not. In Linux the drive (or both drives) are detected correct.by SuperVirus - uBoot
Hi there, the GoFlex capacity LEDs are connected to the following GPIOs: Right capacity bar (HDD0) 41 => 100% 40 => 75% 39 => 50% 38 => 25% Left capacity bar (HDD1) 45 => 100% 44 => 75% 43 => 50% 42 => 25% GPIO output high => LED onby SuperVirus - Debian