Hello Bodhi, I've found two files https://onedrive.live.com/redir?resid=1FBA17E697DFECC3!1596&authkey=!AGQcCvcl0yF5UNY&ithint=folder%2cby miksi - uBoot
Hello, I can boot debian 3.16 rootfs and have serial and SSH working but I need stock files (full mtd0 or uboot and envs) for Pogoplug E02 (pink). I used archlinux tutorial and it didn't backup.by miksi - uBoot
Today my friend brought me a bricked tplink1043nd router and we successfully managed to revive it using raspberry pi and its dedicated tx,rx,gnd pins. No need for usb-ttl convertor. Also, we used putty directly on raspbian. Jst connectors arrived today (among other things) so pogo will get unbrick treatment tomorrow.by miksi - uBoot
I'm considering raspberry pi for JTAG purposes since I got one but ss it possible to connect it also in serial mode directly to pogo without any usb ttl convertors. I considering this also while waiting for adapter just to see if serial console is possible.by miksi - uBoot
Box doesn't appear on network and also no luck with Debian 3.16 rootfs. What hardware do I need for serial console? Maybe I could try with raspberry pi JTAG?by miksi - uBoot
Green light flashing for about 15sec then stops for sec or two. This repeats. Unfortunately I have nothing of logs, I did setup netconsole with right IP addresses. Actually, everything went 'well' during installation: 1. checked fw_env.config and mtd partitions 2. ethaddrs saved 3. did nanddump of mtd0 and saved envs in current_envs.txt 4. no bad blocks 5. extracted tar -xf ubootby miksi - uBoot
I did everything from instruction from install page including change for mac address, pogo machine ID and the rest but now pogo cant boot, neither with nor without usb flash. I get pogo sign green flashing and cannot connect by SSH.by miksi - uBoot
bodhi Wrote: ------------------------------------------------------- > @miksi, > > > Can I proceed with doozan uboot installation > from > > Arch > > No, Jeff's u-boot is too old. You'll need to > install my latest u-boot build in the first post > of this thread. > > > and what else needs to be done > > See this post aby miksi - uBoot
Hello, I have a E02 pink pogo and like many others I tried with Archlinux tutorial on http://archlinuxarm.org/platforms/armv5/pogoplug-v2-pinkgray. Now I have only access to alarm on flash stick and only two mtd partitions visible (mtd0 and mtd1). Can I proceed with doozan uboot installation from Arch and what else needs to be done to be able to boot to original pogo software without attachedby miksi - uBoot