bodhi You are the man :) Thanks a lot :)by rafek - uBoot
You made my day :) Currently i have working Pogo with booting from USB, last thing is moving OS to SD card. Is any chance for fast path for this ?by rafek - uBoot
I load original mtd0 and now i can run Pogo from USB, but only when i load kwboot (through serial console). When i reboot Pogo nothing happened. Please look at log.by rafek - uBoot
I try recovery but now i can boot only with kwboot and get this output: root@test-VirtualBox:/home/test/pogo/kwboot-tool# ./kwboot -t -B 115200 /dev/ttyUSB5 -b uboot.2016.05-tld-1.pogo_v4.mtd0.kwb -p Sending boot message. Please reboot the target...\ Sending boot image... 0 % [......................................................................] ... 99 % [........................by rafek - uBoot
I prepared SD card (set fs as ext3) with commands: root@test-VirtualBox:~# mount /dev/sdb1 /media/sdb1 root@test-VirtualBox:~# cd /media/sdb1/ root@test-VirtualBox:/media/sdb1# tar -xjf /home/test/pogo/Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 root@test-VirtualBox:/home/test/pogo/2# cd /media/sdb1/boot root@test-VirtualBox:/media/sdb1/boot# cp -a zImage-4.4.0-kirkwood-tld-1 zImagby rafek - uBoot
Dear bodhi, thank You for reply. I use mtd0 file from this post http://forum.doozan.com/read.php?3,16789,16789#msg-16789 and link http://bit.ly/189BnB6. I would actually restore the Pogo to action (not necessary to original), I very much appreciate your commitment and I will be very grateful for any clues.by rafek - uBoot
Hi Bodhi, i have problem after revert back to original, currently i bricked my Pogo v4 (led no blinking, only lan led working). I try with tis below steps: root@test-VirtualBox:/home/test/pogo/kwboot-tool# ./kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2016.05-tld-1.pogo_v4.mtd0.kwb -p Sending boot message. Please reboot the target...\ Sending boot image... 0 % [.......................by rafek - uBoot