At this current point I don't have an SD card or usb set up. Do I need to follow this these instructions? http://forum.doozan.com/read.php?2,12096 Where do I find uboot.2016.05-tld-1.environment at? Sorry, I am a little lost on these instructions.by dayv2005 - uBoot
I'll give it a try and follow up. Would I be able to use an sdcard instead of a USB drive? Not sure if the uboot is looking for usb on boot.by dayv2005 - uBoot
Ok i managed to get it to boot using kwtool. It took several tries. Sending boot message. Please reboot the target...\ Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [......................................................................] 99 % [by dayv2005 - uBoot
Ok, I finally got around to giving this a go. It's stuck on the first message. Sending boot message. Please reboot the target.../ It never gets past that. The spinner at the end never seems to change speeds so I don't really know if it's working or not. I have rebooted about 20 times. Not sure if my serial connection got jacked up or not. Is there anyway to test it withby dayv2005 - uBoot
Thanks for the quick response. I'm currently at work. I'll give this a test tonight when I get home. In the mean time I downloaded kwboot-2016.05.tar (http://forum.doozan.com/read.php?3,12381) uboot.2016.05-tld-1.pogo_v4.bodhi (http://forum.doozan.com/read.php?3,12381) I would just untar them to the same directory and run the following command: ./kwboot -t -B 115200 /deby dayv2005 - uBoot
Hi, I am new here so I hope I'm posting this in the correct place. I have a pogoplug Mobile that I was experimenting with. I started by following this tutorial http://blog.qnology.com/2014/07/hacking-pogoplug-v4-series-4-and-mobile.html?m=1 The device was new so I needed serial console access. I got serial access and changed the rcS file to start up dropbear and disable the pogoplug servby dayv2005 - uBoot