@bodhi Thank you! I've installed the new jessie root fs and upgraded the kernel to the newest version afterwards. This works fine so far... But sometimes, when the additional external usb3 harddisk is attached as well, it tries to boot from it instead of the usb stick. Log: U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:23:43 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 Mby highend - uBoot
Here we go: PogoE02> printenv arcNumber=3542 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $loadr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; thenby highend - uBoot
Hi feas, the stick I used to boot from is dead. I wanted to setup everything from scratch anyway because of this. How can I capture the output of printenv from inside u-boot to e.g. a file to post it here? Easy to do from the rescue system but I've never done this from u-boot.by highend - uBoot
Hi, I wanted to update to the latest u-boot via http://forum.doozan.com/read.php?3,12381 but it seems I messed up in the B. Flashing default u-boot envs image part... The serial console states: U-Boot 2016.05-tld-1 ... ... Hit any key to stop autoboot: Timer from 10 to 0 When I don't abort it the last lines in the console are loading uImage ... ** Bad device usb 0 ** loadingby highend - uBoot