Show all posts by user

Re: Help unbricking IOmega ix4-200d - 7 months ago

Hi again, do you know why the Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2 didn't work.. just curiosity. Regards Rodrigo Arenas

by roarenas - uBoot

Re: Help unbricking IOmega ix4-200d - 7 months ago

Thanks, for the help. Regards Rodrigo

by roarenas - uBoot

Re: resurrecting iomega storcenter ix2 u-boot and debian - 7 months ago

Hi I found this topic interesting, I have a ix2 with dust on it, so i decide after use an ix4-200d with debian took the ix2 alive with debian, but I don't understand where you obtain - 'buffalo/uImage.buffalo.lsgl' - 'orion/busyrd' I download and run the generate_disk_image.sh and build an image, mount it to de /dev/loop0p1 and /dev/loop0p3 Can you guide me t

by roarenas - uBoot

Re: Help unbricking IOmega ix4-200d - 7 months ago

Update, i try with Debian-5.13.6-kirkwood-tld-1-rootfs-bodhi.tar.bz2 and start.. so far, I must change some parts beacuse dont find the roorfs, I must put a label to the partition on the usbstick Regards Rodrigo Arenas

by roarenas - uBoot

Re: Help unbricking IOmega ix4-200d - 7 months ago

Hi after 7 years my iomega stop working, i didn't make a backup of the pendrive from where it has boot and today the pendrive is dead. I think, ok no problem, I will follow the steps on the forum but doesn't works I follow the steps on https://forum.doozan.com/read.php?2,12096 Where say Note: If this is your first time installation, then you only need rootfs Debian-6.5.7-kirkwood

by roarenas - uBoot

Re: Help unbricking IOmega ix4-200d - 8 years ago

Hi, it's running... thanks... Rodrigo

by roarenas - uBoot

Re: Help unbricking IOmega ix4-200d - 8 years ago

Hi Bodhi Thanks for the answer, I will search why the next events: - [ 0.393620] Initramfs unpacking failed: junk in compressed archive - [ 6.478677] kirkwood-cpufreq kirkwood-cpufreq: Unable to get cpuclk - [ 6.485085] kirkwood-cpufreq: probe of kirkwood-cpufreq failed with error -22 a the follow is the ouput - [ 10.813213] Unable to handle kernel paging request at virtual address

by roarenas - uBoot

Re: Help unbricking IOmega ix4-200d - 8 years ago

Dear bodhi Hi, I have one of this NAS with the original software (after buy the nas to a fellow and restore the last firmware on it), it was running well but I decide to upgrade it with 4 3TB disks, it works for a while until reboot, then I lost the raid and everything in there (i have a backup :>)... so I decide install debian on it, or another linux distribution with gpt support, then I

by roarenas - uBoot