Hello everyone, I need to reinstall Debian on my NSA 325v2 because the USB flash drive with the operating system is causing issues. I'm wondering if it's worth buying a SATA SSD for the OS installation. What do you think, will there be a noticeable difference switching from USB 3 to SATA on this old NAS? P.S.: Only now, after years, I realize that I've always used one of the reby Odradek - Debian
got to mount it with -noload, backed it up and moved everything to another flash drive, now it boots! Thanks againby Odradek - uBoot
first of all, thanks for help. I am unable event to back it up because i cannot mount it for the same reason "read only", seems like i just have to buy another flash drive and start all over... problem is i forgot how to do it :)by Odradek - uBoot
yes, ext3. i get the "read only file system" when trying to fsck itby Odradek - uBoot
Suddenly my NSA 325v2 with uboot and debian stopped working: it was on but unresponsive, not even getting it's ip from dhcp. Turning it off and on again i get this error : [ 11.764587][ T7] scsi 2:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 11.782545][ T75] sd 2:0:0:0: 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 11.799423][ T75] sd 2:0:by Odradek - uBoot
thanks, finally i tried again and now i can connect via serialby Odradek - uBoot
Hello, some days ago my NSA 325 v2 stopped working and i do not know why; switched off and turned on again but it did not came online. I suspect a fault in the usb drive with debian installed on it. So i tried to connect with the serial connection but i do not remember the connection settings, and i get a corrupt output from the console. What are the correct connection settings for the serial comby Odradek - uBoot
Yes I did a dump of it, I have to check if I still have it, but it was not the original stock uboot, I already had this one :U-Boot 1.1.4 (Jul 18 2013 - 10:47:29) Marvell version: 3.5.9 . Is it ok for you?by Odradek - uBoot
How can i help you? I have already updated to the last version, is it ok?by Odradek - uBoot
Yes, uBoot successfully updated, now time to do a fresh debian installation, thank youby Odradek - uBoot
bodhi Wrote: ------------------------------------------------------- > Odradek, > > This problem is in stock OS. So look like your > stock rootfs was corrupted. > > You could try to reflash stock FW. > > Or you could just go ahead and install new Debian > rootfs and u-boot by using UART booting with > kwboot. Basically go all the way and forget stockby Odradek - uBoot
bodhi Wrote: ------------------------------------------------------- > Check for bad block in dmesg > > > dmesg | grep -i bad > > Hello bodhi, yes i did that and apparently no bad block with that. Anyhow I decided for a reboot before checking again.. and it did not boot up again, so i checked with the serial connection and saw this: Dependency failed. Aborteby Odradek - uBoot
Hello everyone! I was going to update uboot, kernel and debian on my NSA325 v2, but it seems i have got some problems. I am running Uboot root@nsa325:/# strings /dev/mtd0 | grep U-Boot U-Boot 1.1.4 (Jul 18 2013 - 10:47:29) Marvell version: 3.5.9 If U-Boot Endiannes is going to change (LE->BE or BE->LE), Then Env parameters should be overriden.. U-Boot ** Invalid partition type "%.by Odradek - uBoot