exact same result, but perhaps i missed something in the conf file :/ root@raspberrypi:~# openocd -f pogo.cfg Open On-Chip Debugger 0.10.0+dev-00581-g1b864d6e (2018-11-24-00:25) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html BCM2835 GPIO config: tck = 11, tms = 25, tdi = 10, tdo = 9 BCM2835 GPIO nums: swclk = 25, swdio = 24 BCM2835 GPIby alonetrio - uBoot
hi @joerg_999 i'm trying to unbrick my stora ms2110 via jtag (rasp PI1)/openocd so i soldered jtag, and seems ok using openocd : root@raspberrypi:~# openocd -f pogo.cfg Open On-Chip Debugger 0.10.0+dev-00581-g1b864d6e (2018-11-24-00:25) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html BCM2by alonetrio - uBoot
so nothing with serial :/ so i soldered jtag, and seems ok using openocd : root@raspberrypi:~# openocd -f pogo.cfg Open On-Chip Debugger 0.10.0+dev-00581-g1b864d6e (2018-11-24-00:25) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html BCM2835 GPIO config: tck = 11, tms = 25, tdi = 10, tdo = 9 BCM2835by alonetrio - uBoot
thx, i will let you know my progress. thx for all. AloneTrio.by alonetrio - uBoot
i just ordered another usb to ttl "dongle" FTDI powered, and hope to see a serial output ;) will i have to use kwboot to boot, and reflash from what i understand ? AloneTrio.by alonetrio - uBoot
Bodhi, as i said, and i don't know why, i never had any outpout from the serial port of the stora, not even with the stock uboot, or yours when it was working ;) so no choice... AloneTrio.by alonetrio - uBoot
Bodhi, grrr ;) jtag is the only option ? ok, is there a jtag pinout somewhere ? regards, AloneTrioby alonetrio - uBoot
bodhi, still nothing new. no ping. yes, env default -a, perhaps cleared the bootcmd env var, then saveenv. i tried something : for now, when i plugged the power cord, the stora power on automatically, i decided to remove the battery ( i don't know what it save, clock, something else ? ), replace the battery, now i need to press the power button to get it powered on. Still same effby alonetrio - uBoot
hi bodhi ! still nothing :/ i tested with a sata and usb, perhaps i missed something ? root@AlonUX:/mnt# ls -lart diskstora/boot total 36264 drwxr-xr-x 21 root root 4096 févr. 17 2015 .. drwxr-xr-x 2 root root 4096 juil. 16 2017 dts -rw-r--r-- 1 root root 153501 juil. 16 2017 config-4.12.1-kirkwood-tld-1 -rwxr-xr-x 1 root root 3821528 juil. 16 2017 zImage-4.12.1-kirkwoby alonetrio - uBoot
hi, i didn't have log of the session when i burned: uboot.2017.07-tld-1.netgear_ms2110.bodhi.tar md5 1b09317e896ad928104a1edce459a9f5 sha256 8f5e8b5b33e3979b05698a09a92f99cd41ed04121993058f9b2469122fd280a7 but be sure that all was ok, i had my linux working, etc... i installed netconsole with env var, and all was ok but net console gave me prompt instead of counting fromby alonetrio - uBoot
hi, and thx for your answer. i tried with 2 differents usb key, with ext3, ext4 and nothing. it do not even try to access the key. Any other voodoo tricks i can try ?by alonetrio - uBoot
hi all, i recently flashed my stora with the latest uboot from https://forum.doozan.com/read.php?3,12381,12381#msg-12381 all was ok, netconsole was working ok, etc.... But ( as i am a noob :=0 ) i have done a "env default -a" i directly loose my netconsole, and the only choice was a reboot. Since this day, it seem i have a brick.... is there something to do/test to make it alivby alonetrio - uBoot