SOLVED ok, now it works. oh man ... X) I missed the "skip"-part in "4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Skip this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time)" I forgot, that while troubleshooting the powerloss with kwboot, I installed the latest bootloadby elisdg - uBoot
oh no, the problem still exists, its strange... when I do: cat dts/kirkwood-nsa325.dtb >> zImage.fdt ... while preparing the boot-directory I get the error I described above But when I do: cat dts/kirkwood-goflexnet.dtb >> zImage.fdt ... the NSA325 is starting and I can login BUT network is not working. current printenv is: baudrate=115200 bootargs_linux=consoleby elisdg - uBoot
Thank you!! I don't know why, but now it works, after running: e2fsck -f /dev/sdb1 ... as you advised and Step 4 again (Generate the uImage with DTB embedded inside...). Beforehand I created the USB Stick multiple times, following the guide. I wonder, because e2fsck didn't really say, that it had to repair something. But as a sidenode: At first e2fsck said: fsck e2fsck: Cby elisdg - uBoot
Hello, I tried to do the initial install of the NSA325 with linux-4.12.1-kirkwood-tld and rootfs. I head a powerloss before the reboot. Status: Since there is a lot of awesome information in this forum (thank you guys, thank you bodhi) I got it nearly working. Booted with kwboot, restored Environment with uboot.2016.05-tld-1.environment.src and adjusted it to my environment. USB Stick isby elisdg - uBoot