Moin, i have found a NAS325v2 Stock Image (NSA325 v2_V4.81(AALS.1)C0 on my HDD. Maybe i flashed this image 1-2 years ago, but I am not sure. Does this information help us any further? I tested the -o 2000 / -o 5000 / -o 10000 and my result (same like the nunit): pi@raspberrypi:~ $ ./kwboot -B 115200 -t /dev/ttyAMA0 -d -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p -o 2000 Sending debug mesby Flecks - uBoot
Quotebodhi @Flecks, do you see the same symptom? Ie. 30-second watchdog? Yes, it sounds like the same problem. But my fan spins doesnt spin and i don't know if the uboot image boots up.by Flecks - uBoot
Hey bodhi, I change everything, cables, UART-Controller (Raspi and Arduino), power supply and was at the point to buy a new NAS. So I thought I have nothing to lose and I try one more time the first kwboot. ./kwboot -t -B 115200 /dev/ttyAMA0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p and got the same, its run to 100% and finish. Then i tried the 2nd upload test, this one: ./downloadby Flecks - uBoot
Hey, I was ill the last view days, I will test at Weekend an Arduino Programmer to load the image.:)by Flecks - uBoot
Look what's happens. :) I think we are on the right way. :) Sleeping Out of sleep Got something 21 Got NACK (0x15) character The board should be in serial downloader now. Sending the binary file Sending uboot.1.1.4-nsa325v2-uart.bin, 3713 blocks: Give your local XMODEM receive command now. Xmodem sectors/kbytes sent: 0/ 0kRetry 0: Timeout on sector ACK Retry 0: Timeout on seby Flecks - uBoot
Okay when it is recoverable I will try my best to do this. I download the files, an excecute it on the Raspberry. pi@raspberrypi:~/test2 $ ./download-serial.sh /dev/ttyAMA0 uboot.1.1.4-nsa325v2-uart.bin I don't know what the program do, but I tested several times and quit after 4 iterations. I noticed that the NAS reboot every ~30 sec. and I get this output: Test1 : Sleepingby Flecks - uBoot
Hey, the new kwboot binary doesnt work, the same problem, "Sending boot image..." after that no rebotos nothing. I think the NAS is totaly broken for ever. :/by Flecks - uBoot
Hey i connect my raspberry pi (V1) to the NAS by UART, then i try the kwboot thing for several times. After flashing 100% nothing happens, no restart nothing. I try some variations, to be sure that im doing right. 1. UART > start kwboot > plug in power supply 2. UART > plug in power supply > start kwboot pi@raspberrypi:~ $ ./kwboot -t -B 115200 /dev/ttyAMA0 -b uboot.2017.by Flecks - uBoot
Hi Bodhi, yes it was a stock firmware, i dont know which version but i downloaded and installed it by the normal Zyxel GUI.by Flecks - uBoot
Hey :/ i have a problem with my NSA325 v1. The NAS did not respond. I turn it on an off by pull out the energy connection. I try to reset without any success, the NAS make no noise (Beep). The NAS get no IP-Address. The Power LED and the HDD2 LED is active and that's is. I google for help and find this :NSA-325 Bricked HDD2 LED constantly active "I have noticed that the powerby Flecks - uBoot