For my records, and anyone else's To use the serial with Raspbian Buster Lite pi@raspberrypi:~ $ uname -a Linux raspberrypi 4.14.98-v7+ #1200 SMP Tue Feb 12 20:27:48 GMT 2019 armv7l GNU/Linux Disable bluetooth https://openenergymonitor.org/forum-archive/node/12311.html sudo stty -F /dev/ttyAMA0 onlcr sudo stty -F /dev/ttyAMA0 115200 cs8 sudo picocom --b 115200 --f n --p n -by Sudakan - uBoot
It's booting Debian after following the steps you mentioned bodhi, thank you very much, I think I've got it!by Sudakan - uBoot
bodhi, thank you. Check this below: NSA320> ver U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:46:11 -0700) ZyXEL NSA320 2-Bay Power Media Server gcc (Debian 6.3.0-18) 6.3.0 20170516 GNU ld (GNU Binutils for Debian) 2.28 NSA320> printenv arcNumber=3956 baudrate=115200 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimageby Sudakan - uBoot
Yep, I'm pretty sure I didn't do step 8. Will try the scripts in the link, but I still cannot type into the serial port for whatever reason. Do you guys see something wrong below that would prevent me from typing correctly into the serial connection? pi@raspberrypi:~ $ sudo stty -F /dev/ttyAMA0 -a speed 115200 baud; rows 0; columns 0; line = 0; intr = ^C; quit = ^\; erase = ^by Sudakan - uBoot
bodhi Wrote: ------------------------------------------------------- > QuoteEdit: I actually update the uboot or is > this the stock one? sorry for the silly question, > not sure how to check versions. > > You did updated u-boot successfully. Try verify > the envs to see if they are good. > > > ver > printenv > Cool!! will try that. I'm havinby Sudakan - uBoot
Hi Guys! I did connect GND too, but my original tests did not have it connected. So I think the serial connection is working good now. I'm not sure how to proceed tho. pi@raspberrypi:~ $ sudo picocom --b 115200 --f n --p n --d 8 /dev/ttyAMA0 picocom v1.7 port is : /dev/ttyAMA0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 eby Sudakan - uBoot
I think I've manged to get the serial connection to work. Although, there's something wrong with the characters. It's like they overwrite each other. pi@raspberrypi:~ $ sudo picocom --b 115200 --f n --p n --d 8 /dev/ttyS0 picocom v1.7 port is : /dev/ttyS0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 escape is : C-by Sudakan - uBoot
Ok, so I decided to install Raspbian on the RPI and try kwboot again I have only connected RX and TX. Following this https://forum.doozan.com/read.php?3,51739,51919#msg-51919 pi@raspberrypi:~ $ sudo ./kwboot -t -B 115200 /dev/ttyAMA0 -b ./uboot.2017.07-tld-1.nsa320.bodhi.tar Sending boot message. Please reboot the target... My device continues to just "restart" by itself.by Sudakan - uBoot
Hi all, my name is Leo, I'm a software engineer from Argentina. First of all thank you for all the information provided here. I'm here as another fellow who screwed up, all by him self, his NSA320 uboot. First of all, my setup: NSA320 without HDDs (don't wanna screw up my data, I do have an spare HDD to test tho) (had 4.70 firmware) Manjaro on my laptop RPI3B+ HypriotOSby Sudakan - uBoot