Ok, great, that did it, thank you so much! A couple of follow-up questions: 1) Now that I can get ssh access, would it be good for me to try to load the envs directly onto the Plug, instead of relying on the uEnv.txt file? 2) I have two more plugs that I am going to change over, would it be possible for me to use that file instead of trying to flash the envs to the plugs? (I do have seriby cwdlylion - uBoot
Thanks, I did that and also created a new rootfs on an sd card: both rootfs now get to the point of the solid amber (red and green mixed lights) and no luck either with the ping or in the dynamic ip list from nmap. with a bow, leonby cwdlylion - uBoot
Oh, here is fstab (neglected to look for it in /etc): root@mint:/media/mint/rootfs/etc# cat fstab # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> LABEL=rootfs / ext3 noatime,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults 0 0by cwdlylion - uBoot
Thanks. For the first one, I would have used real values. It has been a bit since I did this (2 weeks?) and since then I just flew from Oregon to the UK so my brain is a bit scrambled. Somewhere in the last while I read a post where you helped someone in a similar situation and so I thought I would try contacting you. Here is the log for the second one (I have included the relevant info froby cwdlylion - uBoot
Thanks for your quick reply and sorry for my bungling about. I did step 8 and there were no errors reported. Maybe it is part of step 8 but I also set the arc number as fw_setenv arcNumber 3960 fw_setenv machid f78 And I believe I did e2 as: fw_setenv mtdparts 'xxxxxxxxx' fw_setenv ethaddr 'xx:xx:xx:xx:xx:xx' (I am not 100% surby cwdlylion - uBoot
Thanks for your quick reply. I did step 8 and there were no errors reported. Maybe it is part of step 8 but I also set the arc number as fw_setenv arcNumber 3960 fw_setenv machid f78 And I believe I did e2 as: fw_setenv mtdparts 'xxxxxxxxx' fw_setenv ethaddr 'xx:xx:xx:xx:xx:xx' (I am not 100% sure I did this and I can't recall thby cwdlylion - uBoot
Hi Friends, First, thanks for all the work you have done here: pretty amazing! I have recently followed the instructions here https://forum.doozan.com/read.php?3,12381 to add the most current u-boot to a pogoplug v4 and then followed the instructions here https://forum.doozan.com/read.php?2,12096 to put Debian onto a flashdrive and now, while the pogoplug appears to boot, it does not seem tby cwdlylion - uBoot