Hi bodhi, After some study, I changed env based on your previous post: https://forum.doozan.com/read.php?2,102054,105374#msg-105374 setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' setenv load_uimage 'ext2load usb 0:1 0x800000 /boot/uImage' setenv load_uinitrd 'ext2load usb 0:1 0x2100000 /boot/uIniby W4G28U - uBoot
Hi bodhi I modified the USB drive with integrated uImage . Also changed the uboot command to ext2load. But I still got the exact same error message: bad device, wrong Image format. Any suggestions? Thank you very much. Below is the console readout. I have tried multiple thumb drivers. all the same. GoFlexNet> setenv usb_load_uimage 'ext2load usb 0x800000 /boot/uImage' Gby W4G28U - uBoot
I try to reactivate my old goflex net box but cannot get it to boot. I used a USB drive formatted in ext3 with label 'rootfs'. Put the 5.13.6 kirkwood on it. With serial console, I got this: U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:35:50) Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serialby W4G28U - uBoot