So now I've changed my interface under /etc/network/interfaces auto lo eth0 iface lo inet loopback iface eth0 inet dhcp after restarting the network I get it now root@debian:~# /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not re-enable some interfaces ... (warning). Reconfiguring network interfaces...Killed old client procesby Arisu - uBoot
After what felt like 1000 attempts, I successfully started the NSA310S with debian. What is missing now is that my lan connection would go. Console boot NSA3x0S> boot starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) 1 Storage Device(s) foundby Arisu - uBoot
So I've made everything new again, now he recognizes the usb and starts but has the next error message It can't be that this is so difficult ^^ U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:50:06 -0700) ZyXEL NSA310S/320S 1/2-Bay Power Media Server SoC: Kirkwood 88F6702_A1 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serialby Arisu - uBoot
Hello Bodhi Many thanks for your help I have now been able to successfully install the U boot. now I have reformatted a 32 GB stick as per your instructions in single Ext3 partition, and label it rootfs. I also created the data with the command "mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.13.6-kirkwood-tld-1 -d zImage.fdt uImage" Nowby Arisu - uBoot
Hello everyone, I've been trying to install Debian on my NSA310S for days. I managed to get to the point where I can access the nas via a USB serial adapter. Have already tried with various Uboot and instructions. However, most of the links to the files are already offline. Can someone please post a small instruction here or knows one that is active and the instruction also works. Thaby Arisu - uBoot