bodhi, Is not the problem at the boot level? As I wrote above, the sequence “remove the power plug > remove the USB stick > wait a while > insert the USB stick > plug in the power > press the power button” works. However, restarting from the console or menu, as well as after a power outage, does not work. Shutting down the system from the menu and then pressing the powerby MireQ - uBoot
bodhi Wrote: ------------------------------------------------------- > MireQ, > > > Finally I got it, I installed both your u-boot > and > > Debian on a usb drive. > > Cool! > > > Now my goal is to install OMV, but I have met > new > > problems. How can I configure it to have DNS > > support in OMV and in the terminal? > >by MireQ - uBoot
bodhi, thanks, Finally I got it, I installed both your u-boot and Debian on a usb drive. Now my goal is to install OMV, but I have met new problems. How can I configure it to have DNS support in OMV and in the terminal? I have 2 disks in NSA325 and would like to configure them as RAID1 preferably in OMV interface, but it can be in console. But for that I need DNS translation.... Now for thby MireQ - uBoot
bodhi Wrote: ------------------------------------------------------- > While in stock OS, > > > dmesg > cat /proc/mtd > cat /etc/fw_env.config > cd /localdisk/tools > ls -larth > > And post the entire log here. /localdisk/tools # dmesg Access Pretec 08GB REX100 1.00 PQ: 0 ANSI: 5 sd 2:0:0:0: 15917056 512-byte logical blocks: (8.14 GB/by MireQ - uBoot
bodhi Wrote: ------------------------------------------------------- > MireQ, > > > Yes, I am inside stock. > > I can say that I have read few topics (about > > Debian/Rootfs, U-boot, also your binpack) and > the > > initially tried to make few steps in these > areas, > > but I have met problems: > > 1. I cannot copy tools to /usr/local/by MireQ - uBoot
bodhi Wrote: ------------------------------------------------------- > MireQ, > > > I am not totally newbie and know what is > terminal, > > basic Linux commands, etc., but I need someone > who > > can support me. > > Ask questions whenever you need! > > > > > For instance, while I am trying to install > U-Boot > > frby MireQ - uBoot
Hello. It's my first post on this forum. I have old NSA325 v2 and I would like to change software with new one from bodhi. I am not totally newbie and know what is terminal, basic Linux commands, etc., but I need someone who can support me. For instance, while I am trying to install U-Boot from this topic, after I sent command: nanddump --noecc --omitoob -l 0x80000 -f mtd0.nsa325 /devby MireQ - uBoot