shv Wrote: > @kuduku, > can you please upload the boot log of the serial c > onsole and the boot env using command printenv? If > you have something like the following original env > from Pogoplug E02 you might not be able to boot fr > om USB or rescue system anymore. > > -shv Working on it , serial port is not getting connected on Win 10 x64 . Checking for aby kuduku - uBoot
bodhi Wrote: ------------------------------------------------------- > The envs above indicated that you have not flashed > the new u-boot env image. Do you have serial > console? if you do, pls post the boot log. If you > don't have serial console, post the log of what > you did during installing new u-boot. Something fxxked up in updating , both rescue and rootfsby kuduku - uBoot
bodhi Wrote: > > The envs above indicated that you have not flashed > the new u-boot env image. Do you have serial > console? if you do, pls post the boot log. If you > don't have serial console, post the log of what > you did during installing new u-boot. yes have serial .Will install boot env image also then post resultsby kuduku - uBoot
bodhi Wrote: ------------------------------------------------------- > kuduku, > > > so to get my Pogoplug E02 to factory pogopulg > > software only mtd1 and mtd2 are required ? > > mtd0 has uboot . Thats not required to be > changed > > ? I have rescue system installed also > > You have stock mdt0 from Gravelrash. And need mtd1 > (kernel) anby kuduku - uBoot
jst818 Wrote: ------------------------------------------------------- > You updated u-boot with this instructions ? > http://forum.doozan.com/read.php?3,12381,page=1 yes exact sameby kuduku - uBoot
On another note Updated uboot and rootfs today . Now Debian not booting . Restored to order version of rootfs also from saved IMG but still rescue only boots Changed ports also . Seems something screwed in uboot update . All updates done from stickies in wiki rescue:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 &quoby kuduku - uBoot
thanks so to get my Pogoplug E02 to factory pogopulg software only mtd1 and mtd2 are required ? mtd0 has uboot . Thats not required to be changed ? I have rescue system installed alsoby kuduku - uBoot
Still looking for mtd1 , mtd2 and mtd3 @Gravelrash has only mtd0 in the dropbox link @bodhi please helpby kuduku - uBoot
Gravelrash Wrote: ------------------------------------------------------- > Thanks Bodhi > > I will grab these off and upload them to my > dropbox so anyone who needs them can grab them Please upload the files to Dropbox Thanksby kuduku - uBoot
@Bodhi please write a restore guide also thanksby kuduku - uBoot
Gravelrash Wrote: ------------------------------------------------------- > you seem to have mtd-0 from my dropbox what else > do you need? But original software ?by kuduku - uBoot
bodhi Wrote: ------------------------------------------------------- > > I have this rescue system but want stock > pogoplug > > back , can it be done ? > > Depending which device do you have, and whether > you have saved the stock MTDs or can get the MTD > backup from someone. restore the original pogoplug firmware on an e02 and the mtdblock partitions wereby kuduku - uBoot
bodhi Wrote: ------------------------------------------------------- > n64 Wrote: > -------------------------------------------------- > ----- > > can this be used to restore the original > pogoplug > > firmware on an e02? > > the mtdblock partitions were wiped and no > backup > > exists. > > No. It is an rescue system to be installed in tby kuduku - uBoot
christineedadrink Wrote: ------------------------------------------------------- > Please elaborate on how this was solved. > I am also getting the same results, tried wheezy > and squeeze but install errors out as reported > above. Solved it installing bodhis rootfs . The install script didn't work out . Try to install using bodhis script , just ensure FS is ext3 onlyby kuduku - Debian
SOLVEDby kuduku - Debian
It doesnt reboot back to rootfs . I have to manually put setenv usb_rootfstype on uboot at each restart for it to boot into rootfs How to automate that ? Rest everything working fine . I have installed Transmission Webmin samba added WIFI dongle rtl8192cu NTP Now balance is media server and VNCby kuduku - Debian
bodhi Wrote: ------------------------------------------------------- > Hi kuduku, > > Perhaps retracing your steps: if you've created > the rootfs as root user? is the pen drive > partition Ext3? if you've confirmed these are > correct. Try this also: remove the usb_rootfstype > env in serial console before booting. > > setenv usb_rootfstype >by kuduku - Debian
bodhi Wrote: ------------------------------------------------------- Did not work out same error . Used a 16GB transcend pendrive [ 77.135005] random: nonblocking pool is initialized [ 78.225980] usb 1-1: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Eby kuduku - Debian
Will use a pendrive and update Thanksby kuduku - Debian
Also tried with Pogoplug pink machine id , exact same errorby kuduku - Debian
bodhi Wrote: ------------------------------------------------------- > kuduku, > > Continue using rootfs 3.14.0-kirkwood-tld-1. Label > the USB drive partition, and set U-Boot envs as > described here: > http://forum.doozan.com/read.php?3,8044,8152#msg-8 > 152 > > The basic idea is to tell Linux to find the rootfs > with label "rootfs". Stby kuduku - Debian
Hi I had a dockstar which i sold off running with gorgone kernel . I am not very good with linux also .. I have a Pogoplug pink now with Rescue V2.8.2 on NAND and also have a serial connection to it . I also have arch running fine on another usb drive . For all installs I am using ext3 partition . printenv u-boot>> printenv arcNumber=2097 baudrate=115200 bootcmd=usb start; runby kuduku - Debian
confirmed its selective dual band , my Samsung GS2 could see no network on manually selecting 5Ghz band only . Immediately connected on 2.4 ghzby kuduku - uBoot
I had made another thread asking if Pogoplug Wireless Extender POGO-W01 can be used with windows but it got trashed somehow . Was able to successfully use it in windows so updating it here Pogoplug WIFI update MODEL : Pogoplug Wireless Extender POGO-W01 DRIVERS : Ralink RT3572 802.11a/b/g/n Wireless Lan USB DeviceDriver download page http://www.ralinktech.com/en/04_support/support.php?sn=by kuduku - uBoot
Hi I have bricked my Pogoplug pink V2 E02 . During jeffs install got errors in uboot and corrupt debs error , checked the thread http://forum.doozan.com/read.php?2,4323,page=1 then installed using gorgone wget to install correctly , booted fine . Uboot had errors but it booted fine with the debian prompt . Tried installing new kernel 3.2 . Errors in last command mkimage -A arm -O linuxby kuduku - uBoot