Hi Joerg nice share! I'm interested in trying your method to unbrick my pogoplug. I already own a rpi and i'm going to buy a usb-ttl adapter, but i'm not sure if i understood what a usb-ttl adapter is. Do you think this could work? It has got only 5 jumper, do i need six right?by ueghio - uBoot
Ok thanks. Which one is the easiest way in your opinion? I found this jtag cable, could it be ok for debugging pogoplug with my raspberry pi? Or can you give me a link of a compatible jtag cable please? Thank you for your very appreciated helpby ueghio - uBoot
Hi bodhi thanks for your reply :) Maybe i've been misunderstood..only ethernet led is blinking intermittently, pogo front led instead doesn't. I tried to boot with the arch USB stick of my working second pogoplug e02 bit it doesn't boot. I can't neither see any associated IP address with my router. Any suggest?by ueghio - uBoot
hi guys, i was trying to install debian on my pogoplug e02 but i ended up with a brick after a power off. ETH led is blinking but i can't access with SSH anymore. I followed ]this tutorial and the poweroff happened after USB stick was formatted :( i think i erased U-Boot! Can you address me to a link for resolving this? What kind of gadgets do i need? What kind of serial cable should i buyby ueghio - uBoot
Hi guys, i was trying yo flash debian on my pogo e02 but i ended with a brick. I can't access through ssh anymore because it doesn't seems to have internet access even if eth led is blinking. Pogo green/orange led instead seems dead. @joerg_999 I read you repaired two pogo with a raspberry pi: I have got one but i'm not such as skilled :( I was wondering if you could do this for meby ueghio - uBoot
Thank you very much. I will give a try!by ueghio - Debian
I tried also to give the following commands found here : ./mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-2.6.32-5-kirkwood -d ../../boot/vmlinuz-2.6.32-5-kirkwood ../../boot/uImage ./mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-2.6.32-5-kirkwood -d ../../boot/initrd.img-2.6.32-5-kirkwood ../../boot/uInitrd unfortunatby ueghio - Debian
Hello guys. My pogoplug E02 arrived today and I tried to install debian using dockstar.debian-squeeze.sh script. After the installation (with no errors apparently) it asks to me to reboot but after I click yes I can't see it in my router's attached devices list. I tried also the hard reboot unplugging the power cable but I can't manage it to work. I followed this instructions on thby ueghio - Debian