You'll need to get access to the serial console. A quick web search shows the following site with directions for accessing the serial console https://judepereira.com/blog/hacking-your-goflex-home-2-uart-serial-console/. After gaining access using the directions on that page power on the GoFlex Home and post the resulting output here. The output will help use determine what your next stepsby rayknight - Debian
flashless Wrote: ------------------------------------------------------- > Looks like dpkg --install is a "double dash" > option, so the first box should read: > > # wget THE_LINK_TO_THE_DEB > dpkg --install logitechmediaserver_x.y.z_all.deb > > (Anybody that knows what they are doing would know > that. That means everyone but me :) Or for a less veby rayknight - Debian
If you've installed armbian then you are likely using U-boot 2016.09. Armbian has a boot.scr in the /boot directory that can modify how u-boot loads kernel and ramdisk. The boot.cmd file contains a user readable version of this script. Modifications are written to the boot.scr file by running the following command: # mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scrby rayknight - Allwinner A10
That's normally the price for the pcDuino3 Nano which is a smaller form factor board from the same manufacturer that doesn't have the on board WiFi. The pcDuino3B usually can be found for around $60 while the pcDuino3 Nano usually is around $40. Both boards are supported by armbian. Rayby rayknight - Off-Topic
According to the H3 datasheet the on chip Boot ROM: Support secure and non-secure access boot Support system boot from the following devices: NAND Flash SD/TF card eMMC Nor Flash Support system code download through USB OTG Since USB is not listed for system boot, you would need to at least have u-boot installed on one of the above devices. Since the Beelink X2 contains a FORESEEby rayknight - Allwinner A10
habibie Wrote: ------------------------------------------------------- > november17 Wrote: > -------------------------------------------------- > ----- > > The problem is, the update is only available > > through an SSH connection to > > https://downloads.pogoplugcom, So older devices > > fresh out of the box will never update. (there > is > > nby rayknight - Off-Topic
habibie Wrote: > So, the stock u-boot of a Beelink X2 unit supports > booting a 3rd-party OS off an external storage? > Does it support a netboot too? As I understand it this isn't a function of u-boot, the Allwinner H3 processor itself will attempt to boot from microSD before booting from the internal flash. So if there is a valid u-boot on the microSD it will boot this 1stby rayknight - Off-Topic
habibie Wrote: ------------------------------------------------------- > rayknight Wrote: > -------------------------------------------------- > ----- > > habibie Wrote: > > > > > Did you have to first replace the stock > u-boot > > > with a 3rd-party u-boot to support booting > from > > an > > > external storage? > >by rayknight - Off-Topic
Like bodhi I have a Linux Mint VM on MacOS as my primary system (a 27" IMac with 3.4 GB i7 processor and 32GB RAM). All my other systems are running either Debian (sometimes Armbian) or OpenWrt, although I've started to migrate some of the OpenWrt systems to LEDE. I also have an Ubuntu VM because that is what works best with the Armbian build system. Rayby rayknight - Off-Topic
habibie Wrote: > Did you have to first replace the stock u-boot > with a 3rd-party u-boot to support booting from an > external storage? The Allwinner H3 devices are set up to boot from microSD 1st if they find a proper u-boot on the microSD, so the image supplied by Armbian boots without any issues. Then the nand-sata-install script will set up the internal nand correctly and cby rayknight - Off-Topic
Just received a Beelink X2 I ordered from eBay for $29.92 with free shipping. Downloaded Armbian and flashed the image to a microSD card, rebooted and ran the nand-sata-install script. Configuring the wireless was simple and now I have a Quad Core Arm system with 1GB RAM, 2 USB 2.0 ports, a microSD slot and a free 10/100 Ethernet port. I have a CP2102 USB-TTL Board in one of the USB slots forby rayknight - Off-Topic
bodhi Wrote: ------------------------------------------------------- > rayknight Wrote: > -------------------------------------------------- > ----- > > https://www.amazon.com/dp/B01FVPITN8/ref=cm_s > > w_r_cp_ep_dp_H5IlybEER6QBG]Mini PCI-E to PCI-E > > Express 1X Extension Cord Adapter Card with USB > > Riser Card on Amazon provides not only > for &gby rayknight - Off-Topic
Mini PCI-E to PCI-E Express 1X Extension Cord Adapter Card with USB Riser Card on Amazon provides not only for "Full-size MiniCard adapter but also Half-size MiniCard by removing extra Full-size extensions." It also says "As PCI Express x1 connector is edge-free / multi-lane, x4, x8 and x16 PCIe Cards are also available. " I think I'll order one to try with my iconnect!by rayknight - Off-Topic
bodhi Wrote: ------------------------------------------------------- > habibie, > > > For a USB3 port, perhaps a > > combination of this inexpensive USB 3.0 PCI-E > PCIe... > > That's very interesting! and so for a few bucks > I'll give it a try. Hopefully it won't be another > dud like most cheap SATA adapters out there. Looks like Aby rayknight - Off-Topic
The Iomega Iconnect is another excellent bargain which occasionally pops up on ebay. I got mine for $20 and there is now one listed for about that when you include shipping. Ebay listing. They more often are listed for $50 or more though.by rayknight - Off-Topic
Be careful as not all Broadcom based WiFi devices are supported on non Intel processors in Linux. Rayby rayknight - Off-Topic
JoeyPogoPlugE02 Wrote: > That's great to know - any idea which hardware > they used int he video? I ask because it was 2GB > RAM and that sounds mighty fine to me. I believe that the Cubietech Cubietruck was used in the video as it is one of the few Allwinner A20 devices with 2GB RAM available. Rayby rayknight - Allwinner A10
JoeyPogoPlugE02 Wrote: ------------------------------------------------------- > Back to the original topic, has anyone tried > hacking this box? It's obtainable in the US for > $30 including shipping, and has the specs to carry > out lightweight tasks. > > Pretty sure you have to solder pins for UART. > That's about the only concern that could make it aby rayknight - Allwinner A10
Any plan to release a new Kirkwood kernel to address CVE-2016-5195. See LWN article Rayby rayknight - Debian
GlobalScale Technologies the originator of the SheevaPlug from which the PogoPlug and similar devices evolved is running a Kickstarter campaign for a 64bit possible successor! This device has a 64bit dual core Marvell processor with up to 2GB of RAM. See details at https://www.kickstarter.com/projects/874883570/marvell-espressobin-boardby rayknight - Off-Topic
bodhi Wrote: ------------------------------------------------------- > I have become quite busy. I can only repond to > posts. So this ON100 project here is on hold. Can you update your GitHub with your latest work on uboot for this? Or can you send me a diff so that I can play around with it? I'd like to continue as I believe you were very close as both ports work on both of mby rayknight - Debian
The important part is as follows: Serial This is the smaller, 4-pin connector. The layout is: Pin Line 1 GND 2 RX (pulled up to 3.3V) 3 TX 4 3.3V What is meant by pulled up to 3.3V for RX? I have tried connecting to pins 1 thru 3 with the same PL2303 based USB Serial adapter I've used with multiple other Marvell based hardware and I get no output. I now have 3 DreamPluby rayknight - Debian
bodhi Wrote: ------------------------------------------------------- > @Joey, > That's strange. Everything looks fine until you > ping it. I suspect the HW, but you'd never know, > it could be something I've missed in the SW. > > @Ray, > Pardon me to ask the obvious question, do you have > only RxD, TxD, and GND wires connected? RxD, TxD and GNDby rayknight - Debian
Those are the directions I followed. Result from make is as follows: In file included from /media/Development/Arm/Devices/KuroBox_Pro/u-boot/board/mv88fxx81/osServices/uboot/mvOsUboot.h:79:0, from /media/Development/Arm/Devices/KuroBox_Pro/u-boot/board/mv88fxx81/osServices/mvOs.h:106, from /media/Development/Arm/Devices/KuroBox_Pro/u-boot/board/mv88fxx81/by rayknight - uBoot
I meant that the DreamPlug has twice the RAM of the Seagate GoFlex Home which has the same processor and also has a SATA port. Rayby rayknight - Off-Topic
I assume you mean the Pogoplug V3 as the original Pogoplug doesn't have eSATA. I've not tried the SATA on a DreamPlug, but I expect it to perform comparable to the SATA on the Seagate GoFlex home which uses the same processor. The DreamPlug however has twice the RAM. Rayby rayknight - Off-Topic
bodhi Wrote: ------------------------------------------------------- > Here is build 2.18. This should have both egiga0 > and egiga1 initialized correctly. So please do 2 > tests. > > Test 1 > > Power down completely (unplug power cord). With > ethernet cable on LAN. Run kwboot. Power up and > then interrupt serial console, > > version > printenby rayknight - Debian
My DreamPlug from this sale arrived today. It is an unused old stock unit as it is the older V9. I already had a V12 unit and another V9. Haven't yet determined what exactly are the differences between V9 and V12. GlobalScale Technologies mentions differences between V9 and V10, but doesn't say anything about the V12 or other versions. Rayby rayknight - Off-Topic
bodhi Wrote: ------------------------------------------------------- > I'm curious, how many among us have this box? are > there interest still? I have both an EA4500 and an E4200V2 (identical hardware). I also have an EA3500 which has half the memory and half the flash, but uses the same switch and radios.by rayknight - Debian
I don't have a dropbox account. However the source is available at http://downloads.buffalo.nas-central.org/KBPro_ARM9/GPL/source/u-boot.src.tar.gz Correct config is rd88f5182_NAS2_TINY_buffalo_hs_config. I thought I was writing the mtd on another device and didn't realize my mistake until too late. Wrote a Dockstar uboot to my Kurobox-Pro instead of the intended Dockstar! Rayby rayknight - uBoot