Hi Bodhi, No i have only find what i posted up here and have not have eny time to do it, to much work the last months, but now i think i can start on the box again so i can finish what i started. AkkJaa...by AkkJaa - uBoot
Hi, Long since I've been in now, well now I'm trying to get something out of the box again. So if there is anyone who has a clue about BTRFS file sytem then I need some hints. For everything stopped here last time. Regards. AkkJaa...by AkkJaa - uBoot
Hi Bodhi, Here i find a link to a man who encrypt and crypt btrfs file systems and some other links to the btrfs filsystems.:- Quote https://linuxhint.com/encrypt-a-btrfs-filesystem/ One more link.:- https://btrfs.wiki.kernel.org/index.php/FAQ#:~:text=All%20data%20(except%20the%20boot,%2Dcrypt)%20since%20Linux%203.2.&text=ecryptfs)%20with%20btrfs.,data%20is%20sent%20to%20btrfs. Alsoby AkkJaa - uBoot
Bodhi, Look like it is empty. Or i can't get into it. NETGEAR ReadyNAS 104 Linux version 5.8.5-mvebu-370xp-tld-1 (root@tldDebianVM) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 Debian 10.0 Thu Feb 17 09:25:27 PST 2000 up 2 minutes root@debian:~# ls -l /tmp/md0_data ls: canby AkkJaa - uBoot
Hi Bodhi, Here is a new readout. It look like there is no files inside the dir. BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Eby AkkJaa - uBoot
Bodhi, Yes, but how to copy the files out, Because i can't find eny cat to look into and copy from. Thanks again. Regards. AkkJaa...by AkkJaa - uBoot
Hi Bodhi, I startup the box again and here is the new readout. BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfullyby AkkJaa - uBoot
Bodhi, Now i have internet it was something wrong with the router i restartet and connect the box on the other post. And now done what you have say. So here you have the readout. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successby AkkJaa - uBoot
Hi Bodhi, Yes I have always connected the internet cable RJ45 / Cat6 to the back of the box who is connected to the Router. At the back of the box there are 2 internet connectors. 2 pcs. LAN. Or the one at the top is LAN. And the bottom one is not marked. I have always connected it to the bottom connector because there is the most activity when looking at the LEDs on each port. And iby AkkJaa - uBoot
Bodhi, Now i have tryed more times but something is wrong. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Endedby AkkJaa - uBoot
Bodhi, It come up the same. i try'ed 3 times but the same. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Eby AkkJaa - uBoot
Hi Bodhi, Now i have try it and here is the readout. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Succby AkkJaa - uBoot
Bodhi, I can't find eny of the files i need for upgard to the latest version of netgear's program item. I am missing uboot.bin kernel.arm and initro.gz So I go for the one you mentioned with a small risk earlier. but can I then run a win 10 computer up on the box to retrieve browse photos and movies etc ??? Oki. Thanks again. Best Regards. AkkJaa...by AkkJaa - uBoot
Hi K20, I will try to do the same you have done to your box. I have the same box as you a RN104. But where do you find the files.: uboot.bin and kernel.arm and initro.gz Is this files inside the Ready NasOs-6.10.3-arm.img file.? Because i can't find this 3 files. When i unzip the Ready NasOs-6.10.3-arm.zip there is only 2 files the .img and a other on. can't see what name the otheby AkkJaa - uBoot
Bodhi, Ok i think i understand. QuoteMarvell>> setenv serverip 192.168.1.3 # this is the IP address of the tftp server 'So this will be my debian computer.' Marvell>> setenv ipaddr 192.168.1.2 # this is the IP address of this box. Marvell>> setenv gatewayip 192.168.1.1 # this is the IP address of the router This files.: uboot.bin and kernel.arm and initro.gzby AkkJaa - uBoot
Hi Bodhi, I have look at it and i have download'ed the Ready NasOs-6.10.3-arm.zip and also The newest Ready-NasOs 6.10.4-arm.zip but there is not the file name what K20 say and have use and i can't find them. The filename uboot.bin. Quotenand erase.chip Marvell>> setenv serverip 192.168.1.3 Marvell>> setenv ipaddr 192.168.1.2 Marvell>> setenv gatewayip 19by AkkJaa - uBoot
Bodhi, Yes back on the box is the following.:- Label 1. is written this.: FW: V6.2.0 Label 2. is written this.: NETGEAR Advanced Network Storage. Model No. RND-4D And in between some Chinese characters. Under that is come a MODEL NAME. RN10400 Then MAC1 and MAC2 and SERIAL. Self declaration Conforming to IS 13252: P1:2010 Yes then youby AkkJaa - uBoot
Hi Bodhi, Ok, so if we try to install the new'est Netgear OS to the box. that will maybe go. But they also say this must be upgard'ed with 1 ver. then the next ver. and so on. And today we don't know what ver. is installed on the RN10400 motherboard. But if we try to install it and see what happend. If that not go. Then we have the Debian system on the USB Drive. So then weby AkkJaa - uBoot
Bodhi, So i can use RAIDar in the Debian computer to access the Netgear box and read the files there.? Regards AkkJaa...by AkkJaa - uBoot
Bodhi, Here is also something. Quote RAIDar Find out what is new in RAIDar 6 https://kb.netgear.com/000059431/ReadyNAS-RAIDar-6-4 RAIDar is used to discover NETGEAR Storage on your local network. (For ReadyNAS OS 6 devices, you can use https://readycloud.netgear.com/client/index.html#page=discoverdevices ReadyCLOUD - see instructions) https://kb.netgear.com/22805/How-do-I-discover-anby AkkJaa - uBoot
Bodhi, Here i find something from netgear i had on my computer.:- QuoteReadyNAS OS 6 Software Versjon 6 6 0 https://kb.netgear.com/31221/ReadyNAS-OS-6-Software-Version-6-6-0 ReadyNAS OS V6.6.0 Release Notes. RN102, RN104 & RN2120: Systems running firmware older than 6.2.1 should update to 6.2.4 first. Then update from 6.2.4 to 6.5.2. Finally, update from 6.5.2 to 6.6.0. Systemby AkkJaa - uBoot
Bodhi, Yes, but i was reading in some info from the Netgear before that this box can't be updatet from a old version direct to the newest version that will go bad they say. it must be done step by step. from one version to the next version and so on. But i will try to find what i was reading at that time. Yeah... i don't like to take the risk to loose all the photos, movies and evby AkkJaa - uBoot
Bodhi, Now i find out what was wrong, When i should try it again here, Then the same problem show up again. And i was thinking right away that this problem have be transfer to the USB Drive. Got a lot of strange sign and everything again. But that was not the problem it was bad connect in the Ground cable from the CP Module to the RN10400 Motherboard who did all this bad sign and things.by AkkJaa - uBoot
Hi Bodhi, Here it come's. The first read out without the HDD's. only with USB Drive. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run withoby AkkJaa - uBoot
Bodhi, Here you have bootup with interupt and printenv after done all this in the last post. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run withoutby AkkJaa - uBoot
Bodhi, Yes here is the first read out. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully Bby AkkJaa - uBoot
Bodhi, Here come the rest of the read out, root@debian:~# shutdown -r now Broadcast message from root@debian (ttyS0) (Sat Jan 1 19:30:05 2000): INIT: Sending process Using makefile-style concurrent boot in runlevel 6. [ ok ] Stopping hotplug events dispatcher: systemd-udevd. [ ok ] Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon. [....] Stopping busybox' klogd implementatby AkkJaa - uBoot
Hi Bodhi, Now i have start up this with 4 new 500Gb HDD's and here is the read out. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS.by AkkJaa - uBoot
Bodhi, On this read out over here in that you answer on, it was no HDD's in the box. Only the read out from the RN10400 motherboard with the USB Drive. But i have now get ready 4 Toshiba 500Gb. HDD's i have remove the partition on, so i can put in the Box and see what happend. But i have only still get the RN10400 motherboard up and going again. But later on i will set in theby AkkJaa - uBoot
Hi Bodhi, Here is a new read out from the RN10400 Motherboard. And now i will put in 4 new 500 Gb. HDD's just to see if everything is ok. But i see that it not save the env's on the motherboard. after reboot. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Deviceby AkkJaa - uBoot