Bodhi, I'am completely agree. Yeah... But if i restore it to stock FW. Then the same thing will happen again when I insert HDD's because then the new stock FW will be destroyed. Because that is what has ruined this before and also what we made. What I was thinking about was making a program that could be on the USB drive that we have made. Which prevent HDD's from accessinby AkkJaa - uBoot
Bodhi, Yes, but is there another way to do it,? must we use stock FW ..? I'am not so happy with netgear for the moment. So if we can do it a other way i will do that. Because it will do exactly the same thing when I insert all the HDDs, Because then what ruined the system we made will destroy stock FW. also. Then there is something we can do to remove the virus or crypto virus thatby AkkJaa - uBoot
Hi Bodhi, Ok here i have try to mount and it look like that it go, but in the /media /sdb1 dir is no files. Here is the command i did. This is from disk 1. root@debian:~# mount /dev/sdb1 /media/sdb1 mount: /media/sdb1: unknown filesystem type 'linux_raid_member'. root@debian:~# mount -a /dev/sdb1 /media/sdb1 root@debian:~# Then remove disk 1 and set in disk 2 Here is disk 2by AkkJaa - uBoot
Bodhi, Yes if you look at the photos from screen1 to screen4 you see that the disk's is.: Linux RAID Member. (version 1.2). So now i try to mount right first and see. AkkJaa...by AkkJaa - uBoot
Bodhi, Here is the last photo. So you see there is a different name on each HDD's but can't mount it. And now i remove the battery from RN10400 Motherboard. So then it maybe not keep the wrong data who come into the motherboard when i had the HDD's into the Netgear box. But this system use a raid system. So is it possible to get out movie's, photos, data and so on.by AkkJaa - uBoot
BodHi, Here come the next photos of the Screen from each HDD's. Regards AkkJaa... Now the last photo in next post. Regards AkkJaa...by AkkJaa - uBoot
Bodhi, Here is a file who are on this debian computer i see it now. /root/�~�B{ٿ�������B! it is under HOME and it is write on it (invalid encoding) Yes but now i will look at the HDD's with icy box and see. Then i post it out here. Regards. AkkJaa... By the way. There is a backup battery on the RN10400 motherboard on 3,0 Volt. I will remove the batteryby AkkJaa - uBoot
Bodhi, Yes... Yeah... well... I can clone the HDDs but then only this problem that lies and destroys on the original disks will move over to a new disk. So there must be a way to get away from the original discs. This happened as soon as the hard drives started working. Then I saw at the terminal that something was wrong, Could not interrupt or do anything at all. Oki, tomorrow i will tryby AkkJaa - uBoot
Bodhi, I have a ICY BOX with place to 4 sata hdd's i regular use it for cloneing. in the ICY BOX is SOURCE sata. TARGET1 sata. TARGET2 sata, TARGET3 sata. With that one i can look at 4 disk's in the win 10 explorer. But can i use that one for geting out movies and things i have on the 4 disks. I try'ed before but at that time i did not see enything on the hdd's from theby AkkJaa - uBoot
Hi Bodhi, Now i have put the HDD's in the box. and all go totaly banana's. keyboard everything. Look at read out here.:- Terminal ready �� BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5by AkkJaa - uBoot
Hi Bodhi, I think i got it. So now i put in the HDD's and boot up from USB Drive. Then when everything is booted up and i login. to the debain with root/root, After that i mount hdd's.? or do i mount the hdd's before i come so far that i login.? Do i do it in the terminal before i start booting.? Yes, then i think i understand the most of it. Well a littlebit of it. Byby AkkJaa - uBoot
Hi Bodhi, Yes, But there is a lot of files, moves, photos on the hard drives that I do not want to lose. Is it possible to get out and look at it again.? Can this box be run as it was made before as original, now with this program on the USB Drive.? So the box must always be boot'ed up with USB Drive each time it be turned off and on again.? So how can I put and store setenvby AkkJaa - uBoot
Hi Bodhi, I changed the date and time on the RN104 card and re-inserted setenv permanently as you wrote. But none of it was stored on the RN104 card, so maybe the problem with this card is that it is not possible to store on the RN104 card. The card works when it has been run from USB Drive. So then there must be something wrong with the RN104 card and why I can not save anything on the RN1by AkkJaa - uBoot
Hi Bodhi, Now i think i have manage to change the date and time on the RN104 card. and program it here is the output. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0000 DDR3 Training Sequence - Ver 5.7.1 DDR3 Trainiby AkkJaa - uBoot
Bodhi, Here is the read out now without USB Drive. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfby AkkJaa - uBoot
Bodhi, Now i have done this.:- Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully BootROM: Imby AkkJaa - uBoot
Bodhi, Now i have assemble the netgear box back, Then when i put in the cord it power up right away without pushing eny switch. Then it blinking all the time in the 2 led's as before. And in the display is standing booting from USB. Then i interupt. and put in the setenv's and boot again. Here is the read out. Terminal ready BootROM 1.08 Booting from NAND flash Geneby AkkJaa - uBoot
Hi Bodhi, I have not been able to program the RN104 card yet. all is runing from the USB Drive. For I still have not managed to set the date and time on the RN104 card. But that means I can assemble the netgear case and insert the hard drives without losing data from the hard drives.? But how can I get into the netgear nas when it's running? to get out what in the hard drives.? Iby AkkJaa - uBoot
Bodhi, I can't change date and time and now it have be online for about 1/2 hour i think. But i think it is better now, here is the read out now. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Trainingby AkkJaa - uBoot
Hi Bodhi, Now i have done all new and here come the read out. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence -by AkkJaa - uBoot
Bodhi, Should I connect the network cable to the RN104 motherboard when I do this again.? I did not have the network cable connected the last time I did this installation. The (RJ45). cable. I saw that the RN104 card searched for IP Address but the RN104 card could not get it as long as the network cable was not connected to the RN104 card. If it does not get network connection through USBby AkkJaa - uBoot
Bodhi, Here you have the readout without USB Drive. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Succeby AkkJaa - uBoot
Hi Bodhi, Now i have done it all again. Here is the read out. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence -by AkkJaa - uBoot
Bodhi. Here you have the read out after i did what you say. Now it looks much better. Terminal ready BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS.by AkkJaa - uBoot
Hi Bodhi, Yeah... i understand, where did i get the other install from.?? i don't remember. Well i try again tomorrow. Thanks again. Regards. AkkJaa..by AkkJaa - uBoot
Bodhi, Then i try again, i have try some times now but something is wrong, but here it comes. i have deleted all in the boot dir now and start new. root@debian:~# cd /media/root/rootfs/boot root@debian:/media/root/rootfs/boot# ls -lart total 37236 -rw-r--r-- 1 root root 15206 Mar 7 10:08 armada-370-netgear-rn104.dtb -rw-r--r-- 1 root root 38058045 Mar 8 20:58 linux-5.10.7-mvebuby AkkJaa - uBoot
Bodhi, Yes i see, i will try this later today. Many thanks again. Best Regards AkkJaa.by AkkJaa - uBoot
Bodhi, Now i deleted everything in the boot dir. and copy inn this files. and done everything again. here it comes. root@debian:~# cd /media/root/rootfs/boot root@debian:/media/root/rootfs/boot# ls -lart total 38604 -rw-r--r-- 1 root root 1024000 Jan 17 05:15 linux-dtb-5.10.7-mvebu-tld-1.tar -rw-r--r-- 1 root root 38430626 Mar 3 00:47 linux-5.10.7-mvebu-tld-1-bodhi.tar.bz2 -rw-r--r--by AkkJaa - uBoot
Ohh.. i see it now. i did not see it this morning.. well.. i downloaded it now.. oki.. i try again right now. Regards. AkkJaa...by AkkJaa - uBoot
Bodhi, Ok i see, i will try to find it. Now i downloaded from this site.:- http://mirror.internode.on.net/pub/kali/dists/kali-dev/main/installer-armhf/current/images/device-tree/ Because i did not find it. But i will go back and try again to find it. Oki here is what i have done now.:- root@debian:~# cd /media/root/rootfs/boot root@debian:/media/root/rootfs/boot# tar -xjf linux-5.10.7-mby AkkJaa - uBoot