Hello Bodhi, This is what I did: I formatted an 8Gb USB with EXT3, and labeled as rootfs, using my ubuntu VM. Then I decompressed the file Debian-5.13.6-kirkwood-tld-1-rootfs-bodhi.tar.bz2 in there, as indicated on the post. After that, I attached to a USB port in the back of the NAS. Then I started kwboot, and seem that can´t find any partition table on the USB. check the attached log. Whatby ehorher - uBoot
Hello bodhi ! Well, first step completed !! Please check atached log. Please let me know the next step..... Thanks! -Horacioby ehorher - uBoot
Hello Bodhi, I was able to download the file from dropbox. Also I have Ubuntu running on VirtualBox, and I installed kwboot on it, so next step is run the command kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p I have a question: I have to download the file on a USB (should be formatted as FAT, ex-FAT, NTFS?) and attach to the NAS, right? if yes, which of theby ehorher - uBoot
Hi Bodhi, I will buy a new CP2102, I tried to swap TX-RX, tried using putty instead secureCRT and I have nothing on the screen. So, if with the new one still the same, I will ty the UART booting as you mentioned. One thing, I tried to download the u-boot for NSA325 from the link https://bitly.com/2xnfGmv but is not responding at all. Please check and if you have an alternative link let me know.by ehorher - uBoot
Hello Bodhi, thanks for your answer. The fan is running, The HDD led did not blink at all. I was able to connect the serial port to my laptop using a USB to TTL adapter (CP2102), but nothing is showing on the console, I setup as 115200, 8 N 1. I´m using secureCRT which is pretty similar to putty. The fan start after 35 seconds. May be is a HW problem? I tested the voltage between 3.3v pin andby ehorher - uBoot
Hello community, I had a NSA325v2 for a while, and after a reboot can´t access it anymore. The box have the power blue led in solid blue, and blinking once every aprox 30 seconds. I´m wondering if you can give me some hints in order to check what going on and see if it a HW issue or something else, may be problem with the boot loader. Thanks a lot in advance, I really appreciate any help onby ehorher - uBoot