Is this ok ? Since i don't know how to make the drive as MBR , Boot label does not have a * to it root@debian:~# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): n Command action e extby dinjo - Debian
I have done that exactly the same way Could changing URL_BOOTSTRAP have caused some issue ?by dinjo - Debian
I tried it never worked , is the script even tested ? Is this labelling correct ? root@debian:~# blkid /dev/sdb1 /dev/sdb1: LABEL="rootfs" UUID="4a1ebf57-568b-4e01-9d54-ae85ea4e1f6d" TYPE="ext3" root@debian:~# blkid /dev/sdb2 /dev/sdb2: TYPE="swap"by dinjo - Debian
I have not tried re-extracting as its late in night for me , but when connecting the flash drive to my Pogoplug its mounted as below , does it looks good will try ext3 also /dev/sdc1 on /media/rootfs type ext2 (rw,noatime,errors=continue)by dinjo - Debian
..by dinjo - Debian
SInce the script has several issues in it i had to run some times and I have seen there were no issues installing uboot, the log is mentioned in first post itselfby dinjo - Debian
Yes i have done all those steps I do have Pogoplug which had debian running on it , the only difference is I'm using ext2 which i have changed in fstabby dinjo - Debian
I don't know which kernel did the squeeze script flashed hence i was asking this ,i tried your rootfs too blinking green and then lights goes off.by dinjo - Debian
No i haven't since it would require 3.x kernel ?by dinjo - Debian
Quotethen i booted the device now no ssh , no ip is showing up.Blinking green and then blinking amber Its not booting quoting from aboveby dinjo - Debian
As i mentioned here its rebooted , what options do i have i cannot setup rescue system since it can be done only after 1st boot , what options do i have, I connected the Flash drive to other pc and here is the contents of fstab # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> /dev/roby dinjo - Debian
I ran the squeeze script(dockstar.debian-squeeze.sh) and everything went fine except that it was not able to get correct URL_BOOTSTRAP as it was failing so i had to change to use the July 2013 version and then i booted the device now no ssh , no ip is showing up.Blinking green and then blinking amber -bash-3.2# ./dockstar.debian-squeeze.sh !!!!!! DANGER DANGER DANGER DANGER DANGER DANGby dinjo - Debian
Since the kernel does not supports inotify the files does not gets updated frequently is there a way out of it ?by dinjo - Debian
Which one do you prefer ? Just hate transmissionby dinjo - Off-Topic
https://pogoplug.com/promo/save70b?utm_source=dockstar&utm_medium=email&utm_campaign=save70_series4_bby dinjo - Off-Topic
Thanks again shv ,maybe you want to include automount script in your tarball itselfby dinjo - uBoot
Yeah thanks automount is working now , final query that you have used barrier=0,nobh in mount options is it recommended for ext4 ?by dinjo - uBoot
Can someone confirm whether this has the dock or not ? $10 ?by dinjo - Off-Topic
Can i use ext4 has bootable drive with debian ?by dinjo - uBoot
$40 seems a bit on high side will try other source.by dinjo - Off-Topic
Thanks shiv the file should go to /etc/udev/rules.d right ? Also i see there is no mention of ext3 ?by dinjo - uBoot
I found this rest are all above $50 if you have the link can you post here Seagate GoFlex Homeby dinjo - Off-Topic
Thanks for the reply any link where i can get one ? And does it has external sata port ? I plan to use a external USB Drive to use with itby dinjo - Off-Topic
I currently have PogoPlug Pro and was on archlinuxarm but since Pro cannot be moved to later kernel they dropped the support so i went ahead and installed Debian on Pro but its still on 2.6 Kernel , I also have Raspberry Pi which I'm going to sell off since it requires several cables to boot off power, usb huff.. Was thinking of which device would you recommend Seagate GoFlex Net/Home , Bby dinjo - Off-Topic
I was able to get the debian version ., but due to some reason i cannot get automount working for my external drive i have added in fstab too but then too automount not works though manually mounting works,by dinjo - uBoot
@ALL Can anyone upload the debian tarball to another host just cannot get it downloaded at all Can you upload the debian tarball on a another host i cannot get the download started from any of the hosts.by dinjo - uBoot
@shv Can you upload the file on a freehost like mediafire I'm unable to download from any of those hosts Just confirming with this debian i would able to boot 2 USB drives together and would be on new kernel ?by dinjo - uBoot