I tried changing the power cord and moving to a different room with the same result. I removed the power supply board and plugged it in and took some measurements where it is printed GND and 5V (the back of the plug receptical that connects the power supply board to the main board). i got the following results: Volts AC: 7.1 Volts DC: 0.1 mAmps: No reading Is there another place wheby radsfaninlv - Rescue System
PogoE02> reset resetting ... U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 PogoE02> printenv arcNumber=3542 baudrate=115200 bootcmd=usb start; run force_rescue_bootcmd; run ubifs_by radsfaninlv - Rescue System
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 PogoE02> reset resetting ... U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB Wby radsfaninlv - Rescue System
Still no good. usb reset resetting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80 EHCI timed out on TD - token=0x80a88 unable to get device descriptor (error=-1) retry: 5 EHCI timed out on TD - token=0x80008c80 EHCI timed out on TD - token=0x80a88 unable to get device descriptor (error=-1) retry: 4 EHCI timed out on TD - token=0x8by radsfaninlv - Rescue System
The USB is still not recognized: U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 PogoE02> setenv usb_ready_retry 30 PogoE02> usb reset resetting USB... USB0: USB EHCI 1.00 scanningby radsfaninlv - Rescue System
bodhi Wrote: ------------------------------------------------------- > radsfaninlv Wrote: > ------------------------------------------------------- > > Ok. Here you go: > > > > > > U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 > > -0700) > > Pogo E02 > > > > SoC: Kirkwood 88F6281_A0 > > DRAM: 256 MiB > > WARNING:by radsfaninlv - Rescue System
Ok. Here you go: U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 PogoE02> printenv usb_ready_retry ## Error: "usb_ready_retry" not defined PogoE02>by radsfaninlv - Rescue System
-sh-3.2# printenv usb_ready_retry -sh-3.2# It prints out nothingby radsfaninlv - Rescue System
SanDisk Cruzer Fit CZ33 16GB USB 2.0 Low-Profile Flash Drive- SDCZ33-016G-B35by radsfaninlv - Rescue System
Still not working. Here is what happens when I try to boot (with usb flash drive or without it): BTW, thank you for the help you have provided. U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0by radsfaninlv - Rescue System
I get the following for nand bad: nand bad Device 0 bad blocks: No number at allby radsfaninlv - Rescue System
@joerg_999 I will try your solution tomorrowby radsfaninlv - Rescue System
Bohdi, I ordered a sandisk USB stick. Should be here on Sunday. I'll update you then. radsfaninlvby radsfaninlv - Rescue System
I can't get the uboot to see the any usb stick. Here is what I get when the pogo boots up: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USBby radsfaninlv - Rescue System
UPDATE: I reinstalled uboot and can now ssh into the pogo. It doesn't recognize any usb drives now. The cursor is Pogoplug:~$by radsfaninlv - Rescue System
Hi, I have bricked my Pogo E02. When plugged in the light flashes green and eventually it flashes yellow. I can only get into it via a serial connection. Here is what I get on boot: U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:23:43 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net:by radsfaninlv - Rescue System
For some reason my USB stick no longer boots in to Arch Linux on my Pogo E02. I can ssh into it via root/ceadmin but it no longer reads the new usb stick. fdisk -l returns nothing and fdisk /dev/sda returns fdisk: cannot open /dev/sda. I am out of ideas. Please help. Here is the output of fw_printenv ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes console=ttyS0,11520by radsfaninlv - Rescue System
The first method worked. THANK YOU VERY MUCH!!by radsfaninlv - Rescue System
I figured out how to get a command prompt. It helps to fully read the output. I changed the machine id to 831 and the arcNumber to 2097 but it still doen't boot. output of printenv: arcNumber=2097 baudrate=115200 bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset bootdelay=3 console=ttyS0,1152by radsfaninlv - Rescue System
The serial cable arrived and this is the output during bootup from putty: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1by radsfaninlv - Rescue System
I have messed up my pogoplug E02 so badly that it won't boot in to the rescue system or from a usb stick. To fix this am I going to need a serial cable? If so, do I just reinstall the rescue system? Thanks.by radsfaninlv - Rescue System
That fixed the problem. I can now ssh into the rescue system and get the rescue prompt. I could not interact with the pogo using the dual nc commands. I used this command nc -klu 6666 and was able to get a u-boot prompt after stopping the autoboot. After entering the commands according to bohdi's instructions I resumed the boot process with boot and I got the orange LED.by radsfaninlv - uBoot
bodhi thanks for responding. Here is the output of netconsole: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) foundby radsfaninlv - uBoot
Hi, I have a pogo E02 that I can only boot with a USB stick. If I remove the usb stick and wifi dongle and plug in the ethernet cable the LED never lights up. I cannot boot into the rescue system. I changed the arcNumber to 3542 to make the LED blink orange when there is USB stick activity. I have since changed it back to 2998 but I still can't boot into the rescue system. The LEDby radsfaninlv - uBoot