Cool. Thanks a lot for all the help.by Neptune - Rescue System
I was not able to capture the whole log earlier. Anyways, here is the complete log http://pastebin.com/GEaVNyf4by Neptune - Rescue System
So I took the plunge and updated the uboot using the details here: http://forum.doozan.com/read.php?3,12381,page=1 Here is my print env, please have a look. http://pastebin.com/gsTGLcFY (Also please tell me how to copy all the contents of the boot sequence using the serial console. I am using script xyz.txt before running the screen command but it only capture partial output. )by Neptune - Rescue System
I found that doing system update using pacman -Syu is breaking something and if I do the update, its resulting into kernel panic. Here is the complete log http://pastebin.com/fnFX6N1n Please suggest, do I need to update the uboot? If yes, how to do that safely?by Neptune - Rescue System
Ok, I downloaded and installed the Archlinux and here is the output. I am unable to get the env output. # cat /etc/fw_env.config cat: /etc/fw_env.config: No such file or directory # And here is the complete output, does this looks better? http://pastebin.com/tQQLJ3WV Also the printenv output from the serial console: http://pastebin.com/bGmpMqecby Neptune - Rescue System
^ I tried to instal the latest Uboot wget http://archlinuxarm.org/os/armv5te/boot/goflexnet/goflexnet.sh chmod +x goflexnet.sh ./goflexnet.sh But got this error # chmod +x goflexnet.sh # ./goflexnet.sh Downloading flash utilities.. blparammd5sum: invalid option -- 's' Try 'md5sum --help' for more information. Failed to install U-Boby Neptune - Rescue System
Ha-ha, don't know, but I downloaded the archive last time when it got messed up. I am downloading again the latest version. Here is the version output U-Boot 2011.12 (Apr 18 2012 - 23:08:20) Seagate GoFlexNet arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709 GoFlexNet>by Neptune - Rescue System
# cat /etc/fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundand # environment sector is assumed present. # MTD device name Device offset Env. size Flash sector size #/dev/mtd2 0x0000 0x20000 0x20000 # segate dockstar: # /dev/mtd0 0xc0000 0x20000by Neptune - Rescue System
Ok, I again reformatted the drive and installed Archlinux again and this time its getting IP(although I have set it as statis IP, it is getting random IP, but this we can solve later). I have 2 issues now, when I boot into Archlinux and issue command What I did: I interrupted the boot sequence and typed this setenv usb_rootfstype ext3 then boot After booting done in Archlinux,by Neptune - Rescue System
bodhi Wrote: ------------------------------------------------------- > Your current env: > > usb_rootfstype=ext2 > > > In serial console, change to ext3: > > setenv usb_rootfstype ext3 > > then let it boot > > boot > > > After verifying everything is working OK, set it > permanently in Linux: > > fw_setenv usb_rootfstypeby Neptune - Rescue System
Ok, Thanks. Will do later today as I am out. Hope this will resolve the network issue also.by Neptune - Rescue System
printenv: http://pastebin.com/3h89stbUby Neptune - Rescue System
It seems that the system got corrupted and I have reinstall from scratch which I did and now I am getting alarm login. Another problem, GFN is not getting IP and in log it can be seen as eth0 is not ready. Output: http://pastebin.com/dDd2M0Ww My eth0 file: Description='A basic dhcp ethernet connection' Interface=eth0 Connection=ethernet IP=static AutoWired=yes Address=(by Neptune - Rescue System
Tried running e2fsck but it didnt helped, got the same error. Further, I took a new USB drive, formatted it with ext3 and untar archlinuxalarm but got this error. http://pastebin.com/iecwbFiaby Neptune - Rescue System
So yesterday I updated the system and I am back to sqaure one, the GFN is not booting up. This time the error is different, seems some kernel issue. Here is the complete log, please have a look. http://pastebin.com/5AxLYun7by Neptune - Rescue System
Finally I have installed the packages I use and everything seems to be running fine. Thanks again for all the help.by Neptune - Rescue System
@bodhi, I guess I had achieved the success :) (sounds silly but for me, its a great success). I installed the earlier version of ARM and I am able to boot into it. Log: http://pastebin.com/bkJanP9Hby Neptune - Rescue System
Ok, I am back at my place and this is what I get when I boot from the disk formatted with ext3 and has archlinux installed. http://pastebin.com/2esxKGTv Here is the screen shot of the disk. http://postimg.org/image/s3vfjy3sp/da843308/ http://postimg.org/image/o3yjo3o7d/c6ba5dee/by Neptune - Rescue System
Hi, Been out from home for few days. Will update once I return back. Hope to solve the issue at the earliest. Thanks.by Neptune - Rescue System
This is the output when I attached the HDD which I was using earlier( I have formatted it with Ext3 and labelled it as rootfs) Looks like, its unable to boot. http://pastebin.com/2ZN1kJ4vby Neptune - Rescue System
Is there a way to capture all the logs shows in the screen window as I am unable to copy all and I am also not able to scroll it. I am using ubuntu.by Neptune - Rescue System
This is output of printenv which I ran without attaching any USB: http://pastebin.com/cCLc0RYhby Neptune - Rescue System
Finally managed to setup the serial console and I am getting lot of errors while its booting. Let me know how to get the output so that it can be looked into.by Neptune - Rescue System
Ok, I am arranging the parts and will update here. Thanks.by Neptune - Rescue System
Ok, here are the output: ubit0-6:~# uname -a Linux ubit0-6 2.6.37-ubit-01715-g1e5cda0 #1 Mon Feb 7 01:35:47 GMT 2011 armv5tel GNU/Linux ubit0-6:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "uImage" mtd2: 02000000 00020000 "pogoplug" mtd3: 0db00000 00020000 "root" ubit0-6:~# cat /prby Neptune - Rescue System
Your device could not be auto-detected. You must be using a device listed below to run this installer. What device are you using? Type the number of your device and press ENTER. 1 - Seagate Dockstar 2 - Seagate GoFlex Net 3 - Seagate GoFlex Home 4 - Pogoplug v1 5 - Pogoplug v2 - Pink 6 - Other 2 Selected Seagate GoFlex Net ./install_uboot_mtd0.sh: line 342: head: not found .by Neptune - Rescue System
A quick clarification, 1. when I am booting the goflex with usb drive plugged in, its getting IP and I can ssh and it gives me ubit prompt. 2. If I reboot without usb drive, it doesn't get IP and obviously I cannot ssh.by Neptune - Rescue System
Sadly, I am not able to boot in to archlinux. Whenever I boot it, it goes to the ubit prompt only.by Neptune - Rescue System
Now getting this error :( goflexnet.sh 100% |*******************************| 2250 --:--:-- ETA ubit0-6:~# chmod +x goflexnet.sh ubit0-6:~# ./goflexnet.sh ./goflexnet.sh: line 8: function: not found ./goflexnet.sh: line 9: function: not foundby Neptune - Rescue System