Tip for who use nc in Windows 10(or 7, 8, 8.1). As you all know, Windows blocked ping for security reasons. And netconsole would not start before server responds. So you must allow it before use nc. Open Windows Power Shell (as an administrator) or cmd (as an administrator), and run this command. netsh advfirewall firewall add rule name="ICMP Allow" protocol=icmpv4:8,any dir=by magisterludi - uBoot
Thanks very much. It works perfetly in my pogo-e02. Here's my way for who need it. It must be done in usb boot, of course. I have newest uBoot (link) with Jeff's Rescue System v2 (link) in nand, and Debian stretch in usb stick. And my mtd partitions. dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "uImage" mtd2by magisterludi - Rescue System
Thanks for reply. I tryed first option. But failed. And I try second option. And sucessed. I found Jeff's uBoot for pogo, and flashed. ( http://jeff.doozan.com/debian/uboot/files/uboot/uboot.mtd0.pinkpogo.jeff-2010-10-23.kwb ) Now I booted rescue system. (w/ ssh!!) And I can install debian. Thanks again. + I tryed flash pogo's original uBoot, but there isn'by magisterludi - uBoot
help! CE>> help ? - alias for 'help' base - print or set address offset boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootext2 dev:boot_part1,boot_part2 addr boot_image linux_dev_name bootm - boot application image from memory bootp - boot image via network using BootP/TFTP protocol bubtby magisterludi - uBoot
Here's the log. U-Boot 1.1.4 (Jul 16 2009 - 21:02:16) Cloud Engines (3.4.16) U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Flash: 0 kB Addrby magisterludi - uBoot
Unfortunately, there's problem, too. CE>> printenv baudrate=115200 loads_echo=0 rootpath=/mnt/ARM_FS/ run_diag=yes CASset=min MALLOC_len=1 ethprime=egiga0 ceboardver=REDSTONE:0.1 ethmtu=1500 usb0Mode=host nandEcc=1bit ethact=egiga0 ipaddr=192.168.0.6 netmask=255.255.255.0 serverip=192.168.0.8 ethaddr= cesvcid= bootargs_root=root=/dev/mtdblock2 ro bootargs=cby magisterludi - uBoot
Thanks, a lot. But there's problem. 13th line make error "** Too many args (max. 16) **". Here's log U-Boot 1.1.4 (Jul 16 2009 - 21:02:16) Cloud Engines (3.4.16) U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRby magisterludi - uBoot
bodhi, I really appreciate your help. :-) I've done the procedure and ready for next step.by magisterludi - uBoot
First of all, I'm not native english user and I'm sorry for my poor english. I used POGO E02(black) rescue system V2 and Debian in stick usb. But power outrage cause boot failure, and i decided reinstall system. After some idiot things happen, my POGO E02 bricked. I have serial connection. No ssh. <- that's the ploblem. The last thing I do is recover nand to docstarby magisterludi - uBoot