It worked! Setting the "machid" variable makes the led behave correctly, both on rescue system (i.e. with the kernel provided by you in the first post) and on my debian install on usb hdd (i.e. with the kernel I rebuilt). Therefore, the led support was already there, but for some reasons I don't know setting the variable "arcNumber" in uBoot is not effective: the variby traycold - Rescue System
how could I set the machid? for arcNumber, I just execute: /usr/sbin/fw_setenv arcNumber 3542 Is it just a question of setting another param with fw_setenv like this? /usr/sbin/fw_setenv machid 3542 I will try as possible (I suppose no harm in doing this)by traycold - Rescue System
hi all, here are further steps I made, about issue of LED not properly set on Pogoplug E02, using rescue. Please consider I'm quite a noob at these things, so forgive me if what I write here is not correct. Having a look at content of rescue source file referenced at first post (custom-RescueV2.8.1.tar.gz), whitin the config file of buildroot (buildroot-config) it's also se the kby traycold - Rescue System
Quotedavygravy kk, thank you for the offer for the patch... actually, 30 minutes and some testing seems to have done it (just took the ALARM support patch and pulled out the two Pogo sections, added/modified two lines or so in each)... I now have a version 2.8.1 that extends arcNumber support for the Pogo_e02 and pogoplugv4 by their given arcNumbers... I tested it in the PogoE02 and it works fby traycold - Rescue System