The first three characters in the interfaces file are missing, it begins like this: onfigure Loopback auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp It was keeping dhcp from obtaining an ip address. Another issue for me is that rebooting is successful only about half of the time on my Mele. I must then unpug/plug for it to boot again.by adelias - Allwinner A10
gnexus Wrote: ------------------------------------------------------- > I can also > verify that the MAC in the environment doesn't > correspond to either the Eth0 or Wlan0 address on > my Mele. On mine at least, the MAC in the environment corresponds to eth0 as labeled on the rj45 connector inside the case.by adelias - Allwinner A10
Jeff Wrote: > The MAC is coded into the environment (the first > 128k of nandh), not the script.bin. You can > verify that with the following commands: > > > dd if=/dev/nandh of=/tmp/env bs=1024 count=128 > strings /tmp/env > > > That should print out the environment of the > android uboot. I had upgraded to the ICS that is on Lundmans site. I fby adelias - Allwinner A10
This is the configuration that I'm using with the XMOS dev board: pcm.!default { type hw card 0 } ctl.!default { type hw card 0 } Need to set device as default in .mpdconf as well.by adelias - Debian
Does 2.6.37 include nfs support.by adelias - Debian