Since i have a console on my Eken T01, i can only see a reset board error while booting from SD U-Boot SPL 2011.09-00002-g8d13bc8-dirty (Jul 21 2012 - 21:22:26) MMC: SUNXI SD/MMC: 0 Loading U-Boot... ### ERROR ### Please RESET the board ### I have tried some uboot mmc with no success..by dagoo - Allwinner A10
Hi all, I'm now able to see the bootlog of my Eken T01a !! The only working pads are those near the Soc (rx/tx). The others (marked 011001, near the battery wires, are not). Soldering was a real nightmare, but doing this have given me some informations : First of all, my tablet seems to have been damaged before. I can only have a successful (but non full booting) bootsequence whilby dagoo - Allwinner A10
äxl, thanks. As soon as i have a debug console view, i'll probably be more informed in what's wrong @boot Maybe tomorrow.by dagoo - Allwinner A10
I've now some garbage output due to bad serial connexion, from the tx/rx testpin near the SoC. tomorrow, i'll buy a max 232 to convert signals, and i'll be back here with some u-boot logs i hope. thank you.by dagoo - Allwinner A10
Hi, nice work ! unfortunalty, notthing happen when booting on my Eken T01a. It's a erase nand tabled i'd like to reflash, and the rescue was a chance for me .by dagoo - Allwinner A10
Quoteäxl dagoo, please create a new topic for questions. I know this article has some photos with soldering done: http://linux-sunxi.org/Hyundai_A7HD Thanks äxl, i'v actually just do an answer+question post relative to affirmation of a uart pinout on the T01A mainboardboard Quotegnexus Checking the IRC logs from last fall would give a full log of that discussion. Thank you too,by dagoo - Allwinner A10