Hi, did anyone look into this device? http://www.seagate.com/files/staticfiles/docs/pdf/whitepaper/ug-goflex-tv-en-us.pdf http://forums.seagate.com/t5/FreeAgent-Theater-and-GoFlexTV/Mod-2-23-Firmware/td-p/97382 http://archlinuxarm.org/forum/viewtopic.php?f=6&t=2562 I can´t even find the specs of the CPU nor any other useful informations. But it does look interesting with HDMI, opby wolfgangn - Off-Topic
Hi again, I got my serial cable, here is the output of a 3.8.4 kernel: ......... [ 30.989456] md: ... autorun DONE. [ 30.992888] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6 [ 31.000940] Please append a correct "root=" boot option; here are the available partitions: [ 31.009337] 1f00 1024 mtdblock0 (driver?) [ 31.by wolfgangn - Debian
Deleted the file, but still does not boot. I think I have to get a serial cable to see what fails... Thank you for your reply!by wolfgangn - Debian
Yes the uBoot is recent. I am certain because i also tried a fresh install of wheezy with another usb stick. The install script did check the uBoot and reported an up-to-date one and did not flash a new one. Sadly i don´t own a serial cable and can not provide any more info other than the netconsole output which stops at "Starting kernel...". What do you mean by changing the machid?by wolfgangn - Debian
Hi, I tried many kernels, including this 3.8.4 from prodigy7. But none of them will boot, my Goflex Net is stuck at "Starting kernel...". The 3.3.2-kirkwood-dg kernel boots fine from an ext2 usb stick and two SATA HDD attached. Any ideas what is wrong with my config? This is my environment: ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes console=ttyS0,115200 led_iby wolfgangn - Debian