Solution: ========= Changed Step 03: Download U-Boot project and compile it: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- rpi_defconfig ==> * Configure U-Boot: ==> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- menuconfig ==> * Enable keyboard: Device Drivers -> Enable driby anymor1024 - Off-Topic
Excuse me. Thank you for your information.by anymor1024 - Off-Topic
I have Raspberry Pi Model B+ V1.2. I would like to use official Raspbian OS with U-Boot. When Raspberry Pi turn on then U-Boot starts and run Raspbian kernel.img. But i do not have anything kernel boot message on LCD monitor. Every messages are send to serial port (UART -> RS232) to the serial console. After Raspbian is started, I can login to system only via serial console or ethernet. Poby anymor1024 - Off-Topic