Show all posts by user

Re: Pogo V4 uBoot - USB reset errors - 2 years ago

Quote Yes. I'm running with USB 3.0 in the back ports right now. I'm very much looking forward to that!

by dhargens - uBoot

Re: Pogo V4 uBoot - USB reset errors - 2 years ago

1. Yes, it's a v3.0 - I bought a 10-pack to update all my Pogos and boot from these. Guess that wasn't such a good idea here. I've used Cruzer Fits on previous V4s, and they've worked without errors. I'll find some Fits and get those working - they fit better in the case anyway. (I'll use the v3s once the 2023.04 version is released, so they won't go to waste.)

by dhargens - uBoot

Pogo V4 uBoot - USB reset errors - 2 years ago

Hello all. I've now updated 3 Pogo V4 uboots (thanks bodhi!), but am having problems with at least 2 of them with the high-speed USB device resetting constantly (the third is so fresh I can't tell if it's having problems too or not, yet). When this happens it essentially hangs the box. I was unsure if I completed the uboot install properly due to these errors, so I was checki

by dhargens - uBoot

Re: Pogo V4 uBoot + Debian install issue - 2 years ago

Yes, I see the filename listed in the Debian-5.13.6-kirkwood-tld-1-rootfs-bodhi.tar.bz2 archive - I must've typed it wrong somehow when I was entering it. Small stuff is important. Thanks again - now I can sleep.

by dhargens - uBoot

Re: Pogo V4 uBoot + Debian install issue - 2 years ago

Since we posted at the same time, here's some results: # ls -l boot/dts/kirkwood-pogo*.dtb -rw-r--r-- 1 root root 10114 Aug 1 2021 boot/dts/kirkwood-pogo_e02.dtb -rw-r--r-- 1 root root 9970 Aug 1 2021 boot/dts/kirkwood-pogo_v4.dtb -rw-r--r-- 1 root root 9970 Aug 1 2021 boot/dts/kirkwood-pogoplug_v4.dtb and the interrupted boot & command: U-Boot 2017.07-tld-1 (Sep 05 20

by dhargens - uBoot

Re: Pogo V4 uBoot + Debian install issue - 2 years ago

Good news - using the instructions on "2017.07 U-Boot Kirkwood" (under "section C") I added a uEnv.txt file to the /boot directory to force it to look in the boot/dts directory and now it boots normally. At this point I'm not sure where it thinks it's looking for the file without that pathing, but at least this forces it to look where I know it is. Thanks for your

by dhargens - uBoot

Re: Pogo V4 uBoot + Debian install issue - 2 years ago

There's a kirkwood-pogoplug_v4.dtb file in boot/dts, so I renamed it and retried the boot - but same problem. Since I can't boot the V4, I don't know how to get the 'printenv dtb_file' command to work and change it. I can interrupt the autoboot, but I don't think that helps me.

by dhargens - uBoot

Pogo V4 uBoot + Debian install issue - 2 years ago

Hi everyone. This is my first post and first time installing the doozan uBoot and a bootable Debian image on a Pogo V4. A few years ago I installed the Arch uBoot & bootable Arch image on some V4s, but now I'm trying to flash a newer uBoot to the remaining stock devices. I followed many posts here on how to do this, and spent a couple of days trying to document it and do it right.

by dhargens - uBoot