Hi Bodi, i'd like set a RAID 1 on my STORA MS 2000 (original netgear's firmware worked in RAID 1). https://forum.doozan.com/read.php?2,33146,33146 Does this guide work on my Stora? If it work, i'll type from step 3?by colibri - Debian
Hi everybody. I had installed LXDE on my Stora MS 2000 but the GUI doesn't work. I followed the wiki. 1) from serial consolle i stopped the countdown and I typed: setenv set_bootargs 'setenv bootargs console=tty0 console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params' saveenv reset 2) from a SSH connect on my mac OS: apt-get update ; apt-get uby colibri - Displays
thanks Bodhi. cat dts/kirkwood-netgear_stora_ms2000.dtb >> zImage.fdt It's working now :)by colibri - Debian
Hi Bodhi i've some problem with ethernet port on nas. The leds are off, even with the ethernet cable connected. When it's loading the system: Cannot find device "eth0" Failed to get interface index: No such device I tryed with ifconfig and cat /etc/network/interfaces but nothing. ifconfig lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.by colibri - Debian
Hi Bodhi i did it!!! I'm so happy!! I followed the instructions of Stormy (here): https://forum.doozan.com/read.php?3,104929,105219#msg-105219 1) I renamed your kwboot_2025.01-rc1_x86-64 in flashware.img on my pen drive (formated in ext2) 2) attached usb drive to Netgear Stora e) powered on Stora 4) left the corrupted u-boot to did his thing until I got this message ## Booting imby colibri - Debian
Ok Bodhi :) Excuse me but I'm a novice in this world. sudo -i screen /dev/ttyUSB0 115200 I powerup my NAS. There is not countdown. I copy and paste here the text log, with md ff00003c and printenv __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | |by colibri - Debian
Hi Bodhi sudo -i screen /dev/ttyUSB0 115200 md ff00003c printenv I recorded a video so you can see the log like if you was here https://youtu.be/z_iBoe9akl4by colibri - Debian
Hi Bodhi thank you so much for your help, patience and kindness. Yes, i'm working with a VM (lubuntu distro) on my mac. I downloaded kwboot_2025.01-rc1_x86-64.tar.bz2 on the same folder of uboot.2017.07-tld-1.netgear_ms2110.mtd0.kwb (download folder) on terminal sudo -i tar -jxvf kwboot_2025.01-rc1_x86-64.tar.bz2 rm kwboot_2025.01-rc1_x86-64.tar.bz2 later i renamed the filby colibri - Debian
on linux i typed correct: uboot.2017.07-tld-1.netgear_ms2110.mtd0.kwb On forum i typed wrong. Sorryby colibri - Debian
Hi Bodhi i downloaded https://www.dropbox.com/s/2hrhrwxn9v0892u/uboot.2017.07-tld-1.netgear_ms2110.bodhi.tar sudo -i unziped the file and deleted .tar file tar -xvf uboot.2017.07-tld-1.netgear_ms2110.bodhi.tar rm uboot.2017.07-tld-1.netgear_ms2110.bodhi.tar i was here: root@colibri-virtualbox:/home/colibri/scaricati# Nas turned off. kwboot -t -B 115200 /dev/ttyUSB0 -b uboby colibri - Debian
Hi body i follow your steps but i had problems. https://forum.doozan.com/read.php?2,12096 - Updated 01 Nov 2023: In sudo mode (root user) i had format a new USB drive with a single Ext3 partition, and label it rootfs. mkfs.ext3 /dev/sdb1 e2label /dev/sdb1 rootfs i copyed Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2 from my download folder on /media/colibri/rootfs/ cp Debian-6by colibri - Debian
Hi Bodhi i typed RESENTEV and later RESET. After writing RESENTEV i didn't typed SAVEENV. The stora give me back this screen: 1 screen 2 screen Will I proceed with 2nd link in the Wiki: Boot Kirkwood rootfs with stock u-boot? Thank you with all my heart for the answer, I was very worried that I had damaged the systemby colibri - Debian
Hello everybody. I follow the guide here, but i've some problems with tfpt. So i did resetenv. Now the machine doesnt' work. If i do printenv the result are a grey squares. Are there any solution? Thanksby colibri - Debian