Sorry, just found another post which expained the bootmode. Flashed fw_linkdelight_2 from 33er rev. Reseting and pressing mode at the same time makes it reflashable. I made a fulldump of my second LCD and reflashed it to the first one. Now it is back as before in mass storage mode. But actually, the display still remains white - so no images/splash screen showing. When i press Menu three times,by Gr3yh0und - Displays
Just got a delight LCD from China and wanted to flash. During flash an error occurred and i know cannot access the device. I just get a white screen, Pressing menu doesn't do anything. Any possibility to revive it? It's still recognised as "USB Display" but not as mass storage device...by Gr3yh0und - Displays
Hey there, sorry for delay. It's missing partitioning and rescueing, will add that when I have more time to play with it again... http://morschi.com/2012/10/05/seagate-goflex-net-debian/ Cheersby Gr3yh0und - Rescue System
Hey alexisazen, Yes you are right. Booting the NSA320's root filesystem from USB and doing the whole NAND install process which leads to a working JEFF V2 Rescue system. After that i booted into rescue and did the USB wheezy install, which also ran fine. I will make a blog post this weekend about the whole procedure. Cheersby Gr3yh0und - Rescue System
Got it working. Resolution: Download the NSA320 tar.gz from davey from here: http://forum.doozan.com/read.php?2,7806,7806,quote=1 Unpack it to USB and, oh wonder, flash_eraseall is working. Now the V2 Version of Jeff is running, which is sufficient for my uses...by Gr3yh0und - Rescue System
davygravy Wrote: ------------------------------------------------------- > ... be very careful here... updates and changes to > mtd-utils have resulted to some new command > structures... Haven't done anything what the script wouldn't have... But I am just wondering why THIS binary (flash_eraseall) is not working on THIS device. i.e. it is executed on another dockstarby Gr3yh0und - Rescue System
Basically the command $NANDDUMP -no -l 0x80000 -f /tmp/uboot-mtd0-dump /dev/mtd0 gives sometimes another MD5sum than $NANDDUMP --noecc --omitoob -l 0x80000 -f /tmp/uboot-mtd0-dump /dev/mtd0 which is used in the install_uboot_mtd0.sh But anyway, after omitting that, I get to the same error like above, that "flash_eraseall" is not existent. Which is just wrong. Writing dby Gr3yh0und - Rescue System
Same problem here: netconsole says: U-Boot 2011.12 (Apr 18 2012 - 23:08:20) When trying to update uboot: rescue:/tmp# ./install_uboot_mtd0.sh !!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!! If you lose power to your device while running this script, it could be left in an unusable state. This script will replace the bootloader on /dev/mtd0. This installer will onlyby Gr3yh0und - Rescue System