Re: Need help install rootfs for Pogo Pro V3 January 24, 2017 02:51AM |
Admin Registered: 13 years ago Posts: 18,570 |
cd /boot/dts mv ox820-pogoplug-pro.dtb ox820-pogoplug-pro.dtb.old wget http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1 sync
Roberto48
Re: Need help install rootfs for Pogo Pro V3 January 24, 2017 12:01PM |
Roberto48
Re: Need help install rootfs for Pogo Pro V3 January 24, 2017 02:09PM |
Re: Need help install rootfs for Pogo Pro V3 January 24, 2017 06:05PM |
Admin Registered: 13 years ago Posts: 18,570 |
Roberto48
Re: Need help install rootfs for Pogo Pro V3 January 26, 2017 08:33AM |
> cd /boot/dts > mv ox820-pogoplug-pro.dtb > ox820-pogoplug-pro.dtb.old > wget > http://forum.doozan.com/file.php?2,file=1264,filen > ame=ox820-pogoplug-pro.dtb,download=1 > sync >>
Roberto48
Re: Need help install rootfs for Pogo Pro V3 January 26, 2017 08:38AM |
> > cd /boot/dts > > mv ox820-pogoplug-pro.dtb > > ox820-pogoplug-pro.dtb.old > > wget > > > http://forum.doozan.com/file.php?2,file=1264,filen > > > ame=ox820-pogoplug-pro.dtb,download=1 > > sync > >> >
Re: Need help install rootfs for Pogo Pro V3 January 26, 2017 09:16AM |
Registered: 7 years ago Posts: 14 |
> > > cd /boot/dts > > > mv ox820-pogoplug-pro.dtb > > > ox820-pogoplug-pro.dtb.old > > > wget > > > > > > http://forum.doozan.com/file.php?2,file=1264,filen > > > > > > ame=ox820-pogoplug-pro.dtb,download=1 > > > sync > > >> > >
Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.17.0-oxnas-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Sat Oct 25 15:59:43 PDT 2014 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug V3 Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 7 pages/cpu @c7ee3000 s6592 r8192 d13888 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 119844K/131072K available (5686K kernel code, 286K rwdata, 1680K rodata, 174K init, 233K bss, 11228K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0739db0 (7368 kB) [ 0.000000] .init : 0xc073a000 - 0xc07659c0 ( 175 kB) [ 0.000000] .data : 0xc0766000 - 0xc07adb00 ( 287 kB) [ 0.000000] .bss : 0xc07adb00 - 0xc07e809c ( 234 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000015] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns [ 0.000181] Console: colour dummy device 80x30 [ 0.000212] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050048] pid_max: default: 32768 minimum: 301 [ 0.050219] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050237] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051066] Initializing cgroup subsys net_cls [ 0.051130] CPU: Testing write buffer coherency: ok [ 0.051520] Setting up static identity map for 0x60567fa0 - 0x60567fd8 [ 0.110451] CPU1: Booted secondary processor [ 0.170140] Brought up 2 CPUs [ 0.170160] SMP: Total of 2 processors activated. [ 0.171100] devtmpfs: initialized [ 0.175196] prandom: seed boundary self test passed [ 0.179115] prandom: 100 self tests passed [ 0.179138] pinctrl core: initialized pinctrl subsystem [ 0.181975] NET: Registered protocol family 16 [ 0.182515] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.186775] gpio-oxnas 44000000.gpio: at address c8846000 [ 0.187051] gpio-oxnas 44100000.gpio: at address c8848000 [ 0.187594] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.309132] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5 [ 0.309248] oxnas-pcie 47c0: link up [ 0.309483] oxnas-pcie 47c0: PCI host bridge to bus 0000:00 [ 0.309511] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 0.309529] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 0.309550] pci_bus 0000:00: root bus resource [io 0x4be00000-0x4befffff] [ 0.309570] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.310056] PCI: bus0: Fast back to back transfers disabled [ 0.310136] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff] [ 0.310535] vgaarb: loaded [ 0.311029] SCSI subsystem initialized [ 0.311907] usbcore: registered new interface driver usbfs [ 0.312010] usbcore: registered new interface driver hub [ 0.312212] usbcore: registered new device driver usb [ 0.312327] pps_core: LinuxPPS API ver. 1 registered [ 0.312340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.312407] PTP clock support registered [ 0.313856] cfg80211: Calling CRDA to update world regulatory domain [ 0.314337] Switched to clocksource rps_clocksource_timer [ 0.328128] NET: Registered protocol family 2 [ 0.329241] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.329282] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.329315] TCP: Hash tables configured (established 1024 bind 1024) [ 0.329402] TCP: reno registered [ 0.329428] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.329466] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.329768] NET: Registered protocol family 1 [ 0.330291] RPC: Registered named UNIX socket transport module. [ 0.330311] RPC: Registered udp transport module. [ 0.330324] RPC: Registered tcp transport module. [ 0.330334] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.330731] Unpacking initramfs... [ 0.530547] Freeing initrd memory: 1904K (c7c4e000 - c7e2a000) [ 0.531648] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.549767] NFS: Registering the id_resolver key type [ 0.549834] Key type id_resolver registered [ 0.549847] Key type id_legacy registered [ 0.549885] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.549903] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.550858] fuse init (API version 7.23) [ 0.552204] msgmni has been set to 237 [ 0.552719] Key type big_key registered [ 0.556472] alg: No test for stdrng (krng) [ 0.631101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.631132] io scheduler noop registered [ 0.631152] io scheduler deadline registered [ 0.631503] io scheduler cfq registered (default) [ 0.632033] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.633303] console [ttyS0] disabled [ 0.633428] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 1.188582] console [ttyS0] enabled [ 1.193098] Unable to handle kernel paging request at virtual address c8885000 [ 1.200286] pgd = c0004000 [ 1.203018] [c8885000] *pgd=67823811, *pte=00000000, *ppte=00000000 [ 1.209269] Internal error: Oops: 807 [#1] PREEMPT SMP ARM [ 1.214722] Modules linked in: [ 1.217766] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.17.0-oxnas-tld-1 #1 [ 1.224693] task: c783c000 ti: c7840000 task.ti: c7840000 [ 1.230072] PC is at sata_oxnas_set_mode+0x90/0x240 [ 1.234931] LR is at sata_oxnas_post_reset_init+0x20/0x120 [ 1.240389] pc : [<c0334988>] lr : [<c0334b58>] psr: 00000113 [ 1.240389] sp : c7841d74 ip : c8884000 fp : c7907010 [ 1.251806] r10: c788ca70 r9 : c7807300 r8 : c725c000 [ 1.257006] r7 : c7907010 r6 : 00000001 r5 : c079a8c0 r4 : 00000000 [ 1.263498] r3 : c8885000 r2 : c0593fd8 r1 : 00000000 r0 : 0228a280 [ 1.269992] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.277263] Control: 00c5787d Table: 6000400a DAC: 00000015 [ 1.282977] Process swapper/0 (pid: 1, stack limit = 0xc78401c0) [ 1.288949] Stack: (0xc7841d74 to 0xc7842000) [ 1.293283] 1d60: c725c000 00000000 c7259380 [ 1.301422] 1d80: c725c000 c7259380 c788c9d0 c0334d30 00000000 c788ca70 c7807300 67258000 [ 1.309560] 1da0: c7907010 00000000 c788ca30 00000001 c7259370 c031e788 00000080 c788ca30 [ 1.317698] 1dc0: 00000032 c079a918 00000080 c88c0000 c0334660 c0323de0 c8882000 c8884000 [ 1.325839] 1de0: c88c0000 c0324158 00000000 c8888000 c8882000 c8884000 c88c0000 c7807300 [ 1.333977] 1e00: c788c9d0 c0334084 c079a918 c010de88 00000000 00000032 00000001 44900000 [ 1.342115] 1e20: 4490000b c7ef8ed8 00000200 00000000 00000000 00000000 c0593a9c 00000000 [ 1.350254] 1e40: 00000000 c7907010 c079a8d4 c7907010 00000000 c079a8d4 c0763398 c72591a0 [ 1.358394] 1e60: 00000000 c02fcbc4 c02fcb98 c07db2a8 00000000 c02fba98 c7907010 c079a8d4 [ 1.366533] 1e80: c7907044 00000000 c0777258 c02fbc48 c079a8d4 c02fbbbc 00000000 c02fa454 [ 1.374671] 1ea0: c782245c c78a9b14 c079a8d4 c788c960 c0799940 c02fb2cc c06b7ea8 c079a8d4 [ 1.382809] 1ec0: c7840000 c079a8d4 c7840000 c0777258 00000000 c02fc03c 00000000 c074ffb0 [ 1.390947] 1ee0: c7840000 c00088a4 00000000 c0567418 0000006d 00000000 00000001 c067fddc [ 1.399088] 1f00: 0000005f c056a1b0 c78a8280 c07cfa48 00000000 00000000 00000001 c7840000 [ 1.407226] 1f20: 00000000 c0779b74 60000113 00000000 c070cbf0 c7ffc794 000000a7 c002c28c [ 1.415365] 1f40: c06c6d4c c070c180 00000006 00000006 c0779b3c c075b428 00000006 c075b408 [ 1.423505] 1f60: c07adb00 000000a7 c0763398 c073a508 00000000 c073ac90 00000006 00000006 [ 1.431644] 1f80: c073a508 c0031244 00000000 c055dcf4 00000000 00000000 00000000 00000000 [ 1.439782] 1fa0: 00000000 c055dcfc 00000000 c00095d8 00000000 00000000 00000000 00000000 [ 1.447920] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.456058] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 1.464212] [<c0334988>] (sata_oxnas_set_mode) from [<c0334b58>] (sata_oxnas_post_reset_init+0x20/0x120) [ 1.473651] [<c0334b58>] (sata_oxnas_post_reset_init) from [<c0334d30>] (sata_oxnas_port_start+0xd8/0x12c) [ 1.483266] [<c0334d30>] (sata_oxnas_port_start) from [<c031e788>] (ata_host_start+0x108/0x1cc) [ 1.491929] [<c031e788>] (ata_host_start) from [<c0323de0>] (ata_host_activate+0x20/0xf8) [ 1.500078] [<c0323de0>] (ata_host_activate) from [<c0334084>] (sata_oxnas_probe+0x218/0x284) [ 1.508572] [<c0334084>] (sata_oxnas_probe) from [<c02fcbc4>] (platform_drv_probe+0x2c/0x5c) [ 1.516976] [<c02fcbc4>] (platform_drv_probe) from [<c02fba98>] (driver_probe_device+0xf8/0x21c) [ 1.525721] [<c02fba98>] (driver_probe_device) from [<c02fbc48>] (__driver_attach+0x8c/0x90) [ 1.534123] [<c02fbc48>] (__driver_attach) from [<c02fa454>] (bus_for_each_dev+0x54/0x88) [ 1.542266] [<c02fa454>] (bus_for_each_dev) from [<c02fb2cc>] (bus_add_driver+0xd8/0x1d0) [ 1.550410] [<c02fb2cc>] (bus_add_driver) from [<c02fc03c>] (driver_register+0x78/0xf4) [ 1.558382] [<c02fc03c>] (driver_register) from [<c00088a4>] (do_one_initcall+0x80/0x1c8) [ 1.566530] [<c00088a4>] (do_one_initcall) from [<c073ac90>] (kernel_init_freeable+0xfc/0x1cc) [ 1.575109] [<c073ac90>] (kernel_init_freeable) from [<c055dcfc>] (kernel_init+0x8/0xe4) [ 1.583165] [<c055dcfc>] (kernel_init) from [<c00095d8>] (ret_from_fork+0x14/0x3c) [ 1.590702] Code: e2422004 e3a04000 ee074f9a e5b20004 (e5830000) [ 1.596823] ---[ end trace d074425de5fb06fc ]--- [ 1.601454] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.601454] [ 1.610549] CPU0: stopping [ 1.613255] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.17.0-oxnas-tld-1 #1 [ 1.621335] [<c000f4b0>] (unwind_backtrace) from [<c000baac>] (show_stack+0x10/0x14) [ 1.629048] [<c000baac>] (show_stack) from [<c056216c>] (dump_stack+0x74/0xd0) [ 1.636244] [<c056216c>] (dump_stack) from [<c000e4cc>] (handle_IPI+0x15c/0x190) [ 1.643612] [<c000e4cc>] (handle_IPI) from [<c0008564>] (gic_handle_irq+0x58/0x60) [ 1.651151] [<c0008564>] (gic_handle_irq) from [<c000c5a0>] (__irq_svc+0x40/0x74) [ 1.658593] Exception stack(0xc0767f70 to 0xc0767fb8) [ 1.663621] 7f60: 00000000 00000000 00000000 00000000 [ 1.671764] 7f80: c0766000 00000000 c07746cc c056960c c07ad8ce 410fb025 c07ad8ce 00000000 [ 1.679897] 7fa0: 00000000 c0767fb8 c000a130 c000a134 60000113 ffffffff [ 1.686487] [<c000c5a0>] (__irq_svc) from [<c000a134>] (arch_cpu_idle+0x28/0x30) [ 1.693854] [<c000a134>] (arch_cpu_idle) from [<c00426a8>] (cpu_startup_entry+0x104/0x170) [ 1.702085] [<c00426a8>] (cpu_startup_entry) from [<c073ab2c>] (start_kernel+0x320/0x388) [ 1.710228] [<c073ab2c>] (start_kernel) from [<6000806c>] (0x6000806c) [ 1.716728] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.716728]
Re: Need help install rootfs for Pogo Pro V3 January 26, 2017 03:23PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: Need help install rootfs for Pogo Pro V3 January 27, 2017 12:13PM |
Registered: 7 years ago Posts: 14 |
root@raspberrypi:/tmp/usb/boot/dts# wget http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1 --2017-01-27 16:00:59-- http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1 Herleiden van forum.doozan.com (forum.doozan.com)... 50.116.34.13 Verbinding maken met forum.doozan.com (forum.doozan.com)|50.116.34.13|:80... verbonden. HTTP-verzoek is verzonden; wachten op antwoord... 200 OK Lengte: 7067 (6,9K) [application/octet-stream] Wordt opgeslagen als: ‘file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1’ file.php?2,file=126 100%[=====================>] 6,90K --.-KB/s in 0,001s 2017-01-27 16:00:59 (4,52 MB/s) - '‘file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1’' opgeslagen [7067/7067]
Re: Need help install rootfs for Pogo Pro V3 January 27, 2017 02:58PM |
Registered: 9 years ago Posts: 226 |
wget -O ox820-pogoplug-pro.dtb http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1-JT
Re: Need help install rootfs for Pogo Pro V3 January 27, 2017 03:44PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: Need help install rootfs for Pogo Pro V3 January 28, 2017 07:13AM |
Registered: 7 years ago Posts: 14 |
Re: Need help install rootfs for Pogo Pro V3 January 28, 2017 01:41PM |
Registered: 7 years ago Posts: 14 |
Re: Need help install rootfs for Pogo Pro V3 January 28, 2017 03:43PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: Need help install rootfs for Pogo Pro V3 January 29, 2017 04:14AM |
Admin Registered: 13 years ago Posts: 18,570 |
cd /boot/dts md5sum ox820-pogoplug-pro.dtb
1b4a4eab5eb94563e980c338cc1762ab ox820-pogoplug-pro.dtb
Re: Need help install rootfs for Pogo Pro V3 January 30, 2017 07:45AM |
Registered: 7 years ago Posts: 14 |
> cd /boot/dts > md5sum ox820-pogoplug-pro.dtb >>
> 1b4a4eab5eb94563e980c338cc1762ab ox820-pogoplug-p > ro.dtb >
root@debian:~# cd /boot/dts root@debian:/boot/dts# ls . ox820-pogoplug-classic.dtb ox820-pogoplug-pro1.dtb .. ox820-pogoplug-pro.dtb root@debian:/boot/dts# md5sum ox820-pogoplug-pro1.dtb 1b4a4eab5eb94563e980c338cc1762ab ox820-pogoplug-pro1.dtb root@debian:/boot/dts#
Re: Need help install rootfs for Pogo Pro V3 January 30, 2017 01:37PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: Need help install rootfs for Pogo Pro V3 January 31, 2017 02:27AM |
Registered: 7 years ago Posts: 14 |
Re: Need help install rootfs for Pogo Pro V3 January 31, 2017 02:51AM |
Admin Registered: 13 years ago Posts: 18,570 |
Quote
Backup
Backup/Restore rootfs using tar command
Re: Need help install rootfs for Pogo Pro V3 January 31, 2017 12:50PM |
Registered: 7 years ago Posts: 14 |
Quote
Backup
>
> Backup/Restore rootfs using tar command
debian login: root Password: Last login: Tue Jan 31 10:39:19 PST 2017 from 192.168.1.7 on pts/0 Linux debian 4.4.38-oxnas-tld-5 #1 SMP PREEMPT Sun Dec 11 17:32:48 PST 2016 armv6l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# fw_setenv ethaddr 00:25:31:01:DE:8A Can't overwrite "ethaddr" root@debian:~#
Re: Need help install rootfs for Pogo Pro V3 January 31, 2017 03:43PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: Need help install rootfs for Pogo Pro V3 February 01, 2017 07:25AM |
Registered: 7 years ago Posts: 14 |
Re: Need help install rootfs for Pogo Pro V3 February 01, 2017 02:56PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: Need help install rootfs for Pogo Pro V3 February 02, 2017 07:58AM |
Registered: 7 years ago Posts: 14 |
Re: Need help install rootfs for Pogo Pro V3 February 05, 2017 01:42PM |
Registered: 7 years ago Posts: 14 |
root@DebianPlug:/home# uname -r 4.4.38-oxnas-tld-5 root@DebianPlug:/home# lsb_release -da No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.11 (wheezy) Release: 7.11 Codename: wheezy
Re: Need help install rootfs for Pogo Pro V3 February 05, 2017 03:49PM |
Admin Registered: 13 years ago Posts: 18,570 |
deb http://ftp.us.debian.org/debian jessie main deb http://security.debian.org/ jessie/updates main contrib non-free deb http://http.debian.net/debian jessie-updates main contrib deb-src http://http.debian.net/debian jessie-updates main contriband then
apt-get update apt-get upgradeAnd after it is done, pay attention to the /boot folder changes (if any). If the initrd.image-4.4.38-oxnas-tld-5 file was regenerated, then you need to also regenerate the uInitrd manually.
Re: Need help install rootfs for Pogo Pro V3 February 06, 2017 05:34AM |
Registered: 7 years ago Posts: 14 |
> deb http://ftp.us.debian.org/debian jessie main > deb http://security.debian.org/ jessie/updates mai > n contrib non-free > > deb http://http.debian.net/debian jessie-updates m > ain contrib > deb-src http://http.debian.net/debian jessie-updat > es main contrib >> and then
> apt-get update > apt-get upgrade >> And after it is done, pay attention to the /boot f
update-initramfs: Generating /boot/initrd.img-4.4.38-oxnas-tld-5
Re: Need help install rootfs for Pogo Pro V3 February 06, 2017 01:10PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: Need help install rootfs for Pogo Pro V3 February 06, 2017 01:54PM |
Registered: 7 years ago Posts: 14 |
root@DebianPlug:~# uname -r 4.4.38-oxnas-tld-5 root@DebianPlug:~# lsb_release -da No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.7 (jessie) Release: 8.7 Codename: jessie
Re: Need help install rootfs for Pogo Pro V3 February 06, 2017 06:08PM |
Admin Registered: 13 years ago Posts: 18,570 |