Welcome! Log In Create A New Profile

Advanced

Need help install rootfs for Pogo Pro V3

Posted by Roberto48 
Roberto48
Need help install rootfs for Pogo Pro V3
January 16, 2017 06:21AM
Hi,

I hope somebody reeds this message...

I have a pogoplug pro (black model) which I hacked for using Plugbox Linux many years ago. But I lost the USB stick with this software and now my Pogoplug is useless.

Is there someone who has an installation file for the usb-stick to get my Pogoplug pro working again?
I tried the Varkey Debian rootfs installation but not succeeded.

Many thanks in advance!

Rob



Edited 1 time(s). Last edit at 01/18/2017 07:17AM by bodhi.
Re: Linux Kernel 4.4.38 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree)
January 16, 2017 06:36AM
Roberto48 Wrote:
-------------------------------------------------------
> Hi,
>
> I hope somebody reeds this message...
>
> I have a pogoplug pro (black model) which I hacked
> for using Plugbox Linux many years ago. But I lost
> the USB stick with this software and now my
> Pogoplug is useless.
>
> Is there someone who has an installation file for
> the usb-stick to get my Pogoplug pro working
> again?
> I tried the Varkey Debian rootfs installation but
> not succeeded.
>
> Many thanks in advance!
>
> Rob

Rob,

See first post of this thread. Create USB rootfs and boot with it.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner



Edited 1 time(s). Last edit at 01/16/2017 06:37AM by bodhi.
bodhi Wrote:

>
> Rob,
>
> See first post of this thread. Create USB rootfs
> and boot with it.

Thanks bodhi,
But no succes! This is what I did (I used my Raspberry Pi to make the USB stick)

I installed the debian-rootfs-pogopro-varkey.tar.gz
I changed the MAC address in the interface file
I boot the Pogoplug with the USB. LED flashes, goes off and on (steady) after a while. But no connection.
I boot again the Pogoplug LED flashes and goes off and stays off.
When I checked the USB stick the rootfs name was changed to a long number....

I hope you can give me some hints....

Rob
Re: Linux Kernel 4.4.38 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree)
January 16, 2017 06:58PM
Roberto48 Wrote:
-------------------------------------------------------
> bodhi Wrote:
>
> >
> > Rob,
> >
> > See first post of this thread. Create USB
> rootfs
> > and boot with it.
>
> Thanks bodhi,
> But no succes! This is what I did (I used my
> Raspberry Pi to make the USB stick)
>
> I installed the
> debian-rootfs-pogopro-varkey.tar.gz
> I changed the MAC address in the interface file
> I boot the Pogoplug with the USB. LED flashes,
> goes off and on (steady) after a while. But no
> connection.
> I boot again the Pogoplug LED flashes and goes off
> and stays off.
> When I checked the USB stick the rootfs name was
> changed to a long number....
>
> I hope you can give me some hints....
>
> Rob

Rob,

The latest rootfs is : Debian-3.17.0-oxnas-tld-1-rootfs-bodhi.tar.bz2 (02 Nov 2014) .

Scroll down to the section dated 02 Nov 2014.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
bodhi Wrote:

> Rob,
>
> The latest rootfs is :
> Debian-3.17.0-oxnas-tld-1-rootfs-bodhi.tar.bz2 (02
> Nov 2014) .
>
> Scroll down to the section dated 02 Nov 2014.

Hi bodhi,

I did but again no success...
This is what I did (following the installation procedure):

- step 1 format the USB drive to ext3 and named it rootfs (by gparted)
- sudo su
- step 2
- step 3 dev/root/ext3 because my original installation was at ext3 as well
- step 4 for the pogoplug pro

Because it doesn't connect, I added the MAC address to the network/interfaces file but again no result.
When I start the Pogoplug I see that there is activity on the USB drive... but the LED stays flashing.

I'm not a linux guru so I don't know what else I can do.

I hope you have some (more) hints!

Rob
Re: Need help install rootfs for Pogo Pro V3
January 18, 2017 07:21AM
It's very hard if we don't know what was installed previously. Do you keep a log of what you did back then? and perhaps a link to the installation procedure?

If no information available then the only way is to connect serial console, or format a hard disk to by pass u-boot and boot directly into it. If I can find a link to that instruction I'll post.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 18, 2017 10:00AM
bodhi Wrote:
-------------------------------------------------------
> It's very hard if we don't know what was installed
> previously. Do you keep a log of what you did back
> then? and perhaps a link to the installation
> procedure?
>
> If no information available then the only way is
> to connect serial console, or format a hard disk
> to by pass u-boot and boot directly into it. If I
> can find a link to that instruction I'll post.

bodhi,

Yes I agree... Well I found that the original installation was in 2012 and the install script was from:
http://archlinuxarm.org/os/oxnas/oxnas-install.sh which I found on the Archlinux arm site for the pogoplug-pro. But that part of the site is removed.

Do you mean by connecting to serial console, flashing of the pogoplug internal flash memory?

Rob
Re: Need help install rootfs for Pogo Pro V3
January 18, 2017 04:27PM
Rob,

> Yes I agree... Well I found that the original
> installation was in 2012 and the install script
> was from:
> http://archlinuxarm.org/os/oxnas/oxnas-install.sh
> which I found on the Archlinux arm site for the
> pogoplug-pro. But that part of the site is
> removed.

Ah, that's enough info for me. This set up will not boot with the new rootfs without changing u-boot envs.

>
> Do you mean by connecting to serial console,
> flashing of the pogoplug internal flash memory?
>

The problem would become simple when we can interact with serial console. There is no need to flash anything, even. The Pogo V3 usually is very simple to connect serial console, it should have the serial header already installed. You only need the buy the serial converter:
http://forum.doozan.com/read.php?8,13263

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 19, 2017 06:21AM
bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> > Yes I agree... Well I found that the original
> > installation was in 2012 and the install script
> > was from:
> >
> http://archlinuxarm.org/os/oxnas/oxnas-install.sh
> > which I found on the Archlinux arm site for the
> > pogoplug-pro. But that part of the site is
> > removed.
>
> Ah, that's enough info for me. This set up will
> not boot with the new rootfs without changing
> u-boot envs.
>
> >
> > Do you mean by connecting to serial console,
> > flashing of the pogoplug internal flash memory?
> >
>
> The problem would become simple when we can
> interact with serial console. There is no need to
> flash anything, even. The Pogo V3 usually is very
> simple to connect serial console, it should have
> the serial header already installed. You only need
> the buy the serial converter:
> http://forum.doozan.com/read.php?8,13263

bodhi,

Aha, the serial trick is working! Now I have output. I put the output after Booting below. Debian is asking for a login but when I use root, nothing happens. How can I change u-boot?
Rob

************************************************************** dump
INIT: version 2.88 booting

[info] Using makefile-style concurrent boot in runlevel S.
[....] udev requires a kernel >= 2.6.32, not started ...[?25l[?1c7[FAIL8[?25h[?0c failed!
[?25l[?1c7[FAIL8[?25h[?0c failed!
[....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Checking root file system...fsck from util-linux 2.20.1
rootfs: clean, 11977/127488 files, 78296/509056 blocks
[?25l[?1c7[ ok 8[?25h[?0cdone.
[ 15.560000] EXT3 FS on sda1, internal journal
[....] Cleaning up temporary files... /tmp /lib/init/rw[?25l[?1c7[ ok 8[?25h[?0c.
[....] Loading kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Checking file systems...fsck from util-linux 2.20.1
[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
[....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Configuring network interfaces...Cannot find device "eth0"
Failed to bring up eth0.
[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Starting rpcbind daemon...[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting NFS common utilities: statd idmapd[?25l[?1c7[ ok 8[?25h[?0c.
[....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
[....] startpar: service(s) returned failure: udev ...[?25l[?1c7[FAIL8[?25h[?0c failed!

INIT: Entering runlevel: 2

[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting NTP server: ntpd[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1798 (syslogd)
[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting rpcbind daemon...[....] Already running.[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting NFS common utilities: statd idmapd[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[?25l[?1c7[ ok 8[?25h[?0c.
[....] Not starting NFS kernel daemon: no exports. ...[?25l[?1c7[warn8[?25h[?0c (warning).
[....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1785 (klogd)
[?25l[?1c7[ ok 8[?25h[?0c.

Debian GNU/Linux 7 debian ttyS0

debian login:
Re: Need help install rootfs for Pogo Pro V3
January 19, 2017 07:13AM
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 19, 2017 09:38AM
bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> user: root password: root

bodhi,

Tx won't work, but after changing the USB-RS232 converter I can login. So far so good!
The next problem is that it can't find eth0....

== [....] Configuring network interfaces...Cannot find device "eth0"
== Failed to bring up eth0.

Suggestions?
Rob
Re: Need help install rootfs for Pogo Pro V3
January 19, 2017 04:05PM
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 20, 2017 05:10AM
bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> Get the output of:
>
>
> dmesg
> uname -a
> cat /proc/mtd
> fw_printenv
> mount
>
>
> And pls post the log here.

Hi bodhi,
Well a lot of info....

debian login: root

Password:
Last login: Wed Dec 31 16:00:37 PST 1969 on ttyS0
Linux debian 2.6.31.6_SMP_820 #7 SMP Thu Jun 14 20:31:06 CDT 2012 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.

root@debian:~# dmesg
[    0.000000] Linux version 2.6.31.6_SMP_820 (root@hunchback) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #7 SMP Thu Jun 14 20:31:06 CDT 2012
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Oxsemi NAS
[    0.000000] 1 memory region
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c045a9e0, node_mem_map c0483000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: root=/dev/sda1 ubi.mtd=2,512 rootfstype=ext3 console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 rootwait mem=128M poweroutage=yes
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125112KB available (4012K code, 316K data, 144K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:96
[    0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[    0.010000] Console: colour dummy device 80x30
[    0.010000] console [ttyS0] enabled
[    0.020000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
[    0.260000] Security Framework initialized
[    0.260000] Mount-cache hash table entries: 512
[    0.270000] CPU: Testing write buffer coherency: ok
[    0.270000] Calibrating local timer... 349.99MHz.
[    0.340000] CPU1: Booted secondary processor
[    0.440000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
[    0.670000] Brought up 2 CPUs
[    0.680000] SMP: Total of 2 processors activated (558.69 BogoMIPS).
[    0.690000] tmpfs: No value for mount option 'mode'
[    0.690000] devtmpfs: initialized
[    0.700000] NET: Registered protocol family 16
[    0.700000] Number of DMA channels = 4, version = 4
[    0.710000] Reserving a DMA channel for DirectRAID
[    0.710000] Allocating 389 SRAM generic DMA descriptors
[    1.220000] PCIeA version/deviceID 082510b5
[    1.220000] PCIeB version/deviceID 082510b5
[    4.250000] ox820_pci_preinit() PCIEB link up timeout (00001814)
[    4.250000] ox820_pcie_setup_resources() Enabling PCIe Pre-Emphasis
[    4.260000] ox820_pciea_setup_resources() resource c781b140
[    4.260000] ox820_pciea_setup_resources()    io:      0x4be00000 - 0x4befffff
[    4.270000] ox820_pciea_setup_resources()    non-pre: 0x48000000 - 0x49ffffff
[    4.280000] ox820_pciea_setup_resources()    pre:     0x4a000000 - 0x4bdfffff
[    4.280000] pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[    4.280000] PCI: bus0: Fast back to back transfers disabled
[    4.290000] PCI: bus1: Fast back to back transfers enabled
[    4.310000] bio: create slab <bio-0> at 0
[    4.320000] SCSI subsystem initialized
[    4.320000] libata version 3.00 loaded.
[    4.320000] usbcore: registered new interface driver usbfs
[    4.330000] usbcore: registered new interface driver hub
[    4.330000] usbcore: registered new device driver usb
[    4.380000] NET: Registered protocol family 2
[    4.380000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    4.390000] Switched to NOHz mode on CPU #0
[    4.390000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    4.390000] Switched to NOHz mode on CPU #1
[    4.400000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    4.410000] TCP: Hash tables configured (established 4096 bind 4096)
[    4.410000] TCP reno registered
[    4.420000] NET: Registered protocol family 1
[    4.420000] Create fragment cache
[    4.450000] fuse init (API version 7.12)
[    4.450000] msgmni has been set to 244
[    4.460000] alg: No test for stdrng (krng)
[    4.460000] io scheduler noop registered
[    4.470000] io scheduler anticipatory registered
[    4.470000] io scheduler deadline registered
[    4.470000] io scheduler cfq registered (default)
[    4.500000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    4.510000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[    4.530000] brd: module loaded
[    4.530000] loop: module loaded
[    4.540000] ox820sata: OX820 sata core.
[    4.540000] scsi0 : oxnassata
[    4.550000] scsi1 : oxnassata
[    4.550000] ata1: SATA max UDMA/133 irq 50
[    4.550000] ata2: SATA max UDMA/133 irq 50
[    4.560000] ox820sata: reseting SATA core
[    4.920000] ata1: SATA link down (SStatus 0 SControl 300)
[    4.920000] ox820sata: reseting SATA core
[    5.280000] ata2: SATA link down (SStatus 0 SControl 300)
[    5.280000] tun: Universal TUN/TAP device driver, 1.6
[    5.290000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    5.290000] NAND: Page read time 40ms
[    5.300000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[    5.310000] Scanning device for bad blocks
[    5.380000] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[    5.390000] 0x000000000000-0x000000e00000 : "boot"
[    5.390000] 0x000000e00000-0x000008000000 : "rootfs"
[    5.400000] UBI: attaching mtd2 to ubi0
[    5.400000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    5.410000] UBI: logical eraseblock size:    129024 bytes
[    5.420000] UBI: smallest flash I/O unit:    2048
[    5.420000] UBI: sub-page size:              512
[    5.420000] UBI: VID header offset:          512 (aligned 512)
[    5.430000] UBI: data offset:                2048
[    5.840000] UBI: attached mtd2 to ubi0
[    5.840000] UBI: MTD device name:            "rootfs"
[    5.850000] UBI: MTD device size:            114 MiB
[    5.850000] UBI: number of good PEBs:        912
[    5.860000] UBI: number of bad PEBs:         0
[    5.860000] UBI: max. allowed volumes:       128
[    5.870000] UBI: wear-leveling threshold:    4096
[    5.870000] UBI: number of internal volumes: 1
[    5.880000] UBI: number of user volumes:     1
[    5.880000] UBI: available PEBs:             0
[    5.880000] UBI: total number of reserved PEBs: 912
[    5.890000] UBI: number of PEBs reserved for bad PEB handling: 9
[    5.900000] UBI: max/mean erase counter: 3/1
[    5.900000] UBI: image sequence number: 0
[    5.900000] UBI: background thread "ubi_bgt0d" started, PID 313
[    5.900000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.900000] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[    5.900000] <6>probe for usb
[    5.900000] <6>starting usb for 820
[    5.900000] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[    5.900000] <6>initialise for OX820 series USB
[    5.900000] <6>usb hsmph ctrl set to:0x2a5435e0
[    5.900000] <6>registers:
[    5.900000] <6>SYS_CTRL_CKEN_CTRL 0xf1e00024: 0x00000000
[    5.900000] <6>SYS_CTRL_RSTEN_CTRL 0xf1e00028: 0x00000000
[    5.900000] <6>SYS_CTRL_USBHSPHY_CTRL 0xf1e00084: 0x00002abd
[    5.900000] <6>SYS_CTRL_TERTIARY_SEL 0xf1e0008c: 0x00000000
[    5.900000] <6>SYS_CTRL_SECONDARY_SEL 0xf1e00014: 0x01fff018
[    5.900000] <6>SYS_CTRL_REF300_DIV 0xf1e000f8: 0x00001900
[    5.900000] <6>SYS_CTRL_USB_CTRL 0xf1e00090: 0x00000042
[    5.900000] <6>@ed200000 Device ID register 42fa05
[    5.900000] oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
[    5.900000] drivers/usb/core/inode.c: creating file 'devices'
[    5.900000] drivers/usb/core/inode.c: creating file '001'
[    5.900000] oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
[    5.900000] oxnas-ehci oxnas-ehci.0: reset
[    5.900000]  hcs_params 0x1210012 dbg=2 ind cc=0 pcc=0 ordered ports=2
[    5.900000] oxnas-ehci oxnas-ehci.0: reset
[    5.900000]  hcc_params 0006 thresh 0 uframes 256/512/1024 park
[    5.900000] oxnas-ehci oxnas-ehci.0: park 0
[    5.900000] oxnas-ehci oxnas-ehci.0: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[    5.900000] oxnas-ehci oxnas-ehci.0: ...powerdown ports...
[    5.930000] oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x00000000
[    5.930000] oxnas-ehci oxnas-ehci.0: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[    5.930000] oxnas-ehci oxnas-ehci.0: init command 010009 (park)=0 ithresh=1 period=256 RUN
[    5.950000] oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00
[    5.950000] usb usb1: default language 0x0409
[    5.950000] usb usb1: udev 1, busnum 1, minor = 0
[    5.950000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.960000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.970000] usb usb1: Product: OXNAS EHCI Host Controller
[    5.970000] usb usb1: Manufacturer: Linux 2.6.31.6_SMP_820 ehci_hcd
[    5.980000] usb usb1: SerialNumber: usb
[    5.980000] usb usb1: uevent
[    5.980000] usb usb1: usb_probe_device
[    5.980000] usb usb1: configuration #1 chosen from 1 choice
[    5.990000] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    5.990000] usb 1-0:1.0: uevent
[    5.990000] hub 1-0:1.0: usb_probe_interface
[    5.990000] hub 1-0:1.0: usb_probe_interface - got id
[    5.990000] hub 1-0:1.0: USB hub found
[    5.990000] hub 1-0:1.0: 2 ports detected
[    5.990000] hub 1-0:1.0: standalone hub
[    5.990000] hub 1-0:1.0: individual port power switching
[    5.990000] hub 1-0:1.0: individual port over-current protection
[    5.990000] hub 1-0:1.0: Single TT
[    5.990000] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    5.990000] hub 1-0:1.0: power on to power good time: 20ms
[    5.990000] hub 1-0:1.0: local power source is good
[    5.990000] hub 1-0:1.0: enabling power on all ports
[    6.000000] drivers/usb/core/inode.c: creating file '001'
[    6.000000] Initializing USB Mass Storage driver...
[    6.000000] usbcore: registered new interface driver usb-storage
[    6.010000] USB Mass Storage support registered.
[    6.010000] usbcore: registered new interface driver libusual
[    6.020000] mice: PS/2 mouse device common for all mice
[    6.020000] usbcore: registered new interface driver hiddev
[    6.030000] usbcore: registered new interface driver usbhid
[    6.040000] usbhid: v2.6:USB HID core driver
[    6.040000] TCP cubic registered
[    6.040000] NET: Registered protocol family 10
[    6.050000] lo: Disabled Privacy Extensions
[    6.050000] NET: Registered protocol family 17
[    6.060000] RPC: Registered udp transport module.
[    6.060000] RPC: Registered tcp transport module.
[    6.070000] Waiting for root device /dev/sda1...
[    6.090000] oxnas-ehci oxnas-ehci.0: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[    6.090000] hub 1-0:1.0: port 1: status 0101 change 0001
[    6.190000] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    6.190000] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[    6.310000] usb 1-1: new high speed USB device using oxnas-ehci and address 2
[    6.370000] oxnas-ehci oxnas-ehci.0: port 1 high speed
[    6.370000] oxnas-ehci oxnas-ehci.0: GetStatus port 1 status 8001205 POWER sig=se0 PE CONNECT
[    6.460000] usb 1-1: default language 0x0409
[    6.460000] usb 1-1: udev 2, busnum 1, minor = 1
[    6.460000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    6.460000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.470000] usb 1-1: Product: USB2.0 Hub
[    6.470000] usb 1-1: uevent
[    6.470000] usb 1-1: usb_probe_device
[    6.480000] usb 1-1: configuration #1 chosen from 1 choice
[    6.480000] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    6.480000] usb 1-1:1.0: uevent
[    6.480000] hub 1-1:1.0: usb_probe_interface
[    6.480000] hub 1-1:1.0: usb_probe_interface - got id
[    6.480000] hub 1-1:1.0: USB hub found
[    6.490000] hub 1-1:1.0: 4 ports detected
[    6.490000] hub 1-1:1.0: standalone hub
[    6.490000] hub 1-1:1.0: ganged power switching
[    6.490000] hub 1-1:1.0: global over-current protection
[    6.490000] hub 1-1:1.0: Single TT
[    6.490000] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[    6.490000] hub 1-1:1.0: Port indicators are supported
[    6.490000] hub 1-1:1.0: power on to power good time: 100ms
[    6.490000] hub 1-1:1.0: local power source is good
[    6.490000] hub 1-1:1.0: no over-current condition exists
[    6.490000] hub 1-1:1.0: enabling power on all ports
[    6.490000] drivers/usb/core/inode.c: creating file '002'
[    6.490000] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
[    6.590000] hub 1-1:1.0: port 4: status 0101 change 0001
[    6.690000] usb 1-1: link qh256-0001/ffc00100 start 1 [1/0 us]
[    6.690000] hub 1-1:1.0: state 7 ports 4 chg 0010 evt 0000
[    6.690000] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[    6.770000] usb 1-1.4: new high speed USB device using oxnas-ehci and address 3
[    6.880000] usb 1-1.4: default language 0x0409
[    6.880000] usb 1-1.4: udev 3, busnum 1, minor = 2
[    6.880000] usb 1-1.4: New USB device found, idVendor=090c, idProduct=1000
[    6.880000] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.890000] usb 1-1.4: Product: USB DISK
[    6.900000] usb 1-1.4: Manufacturer: SMI Corporation
[    6.900000] usb 1-1.4: SerialNumber: AA330463000360005441
[    6.910000] usb 1-1.4: uevent
[    6.910000] usb 1-1.4: usb_probe_device
[    6.910000] usb 1-1.4: configuration #1 chosen from 1 choice
[    6.910000] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[    6.910000] usb 1-1.4:1.0: uevent
[    6.910000] usb-storage 1-1.4:1.0: usb_probe_interface
[    6.910000] usb-storage 1-1.4:1.0: usb_probe_interface - got id
[    6.910000] scsi2 : SCSI emulation for USB Mass Storage devices
[    6.920000] usb-storage: device found at 3
[    6.920000] usb-storage: waiting for device to settle before scanning
[    6.920000] drivers/usb/core/inode.c: creating file '003'
[   11.920000] scsi 2:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 0 CCS
[   11.930000] usb-storage: device scan complete
[   11.930000] sd 2:0:0:0: [sda] 4074496 512-byte logical blocks: (2.08 GB/1.94 GiB)
[   11.940000] sd 2:0:0:0: [sda] Write Protect is off
[   11.940000] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[   11.940000] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   11.950000] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   11.960000]  sda: sda1
[   11.970000] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   11.970000] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   12.800000] kjournald starting.  Commit interval 5 seconds
[   12.950000] EXT3 FS on sda1, internal journal
[   12.950000] EXT3-fs: recovery complete.
[   12.960000] EXT3-fs: mounted filesystem with writeback data mode.
[   12.970000] VFS: Mounted root (ext3 filesystem) on device 8:1.
[   12.980000] devtmpfs: mounted
[   12.980000] Freeing init memory: 144K
[   15.800000] EXT3 FS on sda1, internal journal


root@debian:~# uname -a
Linux debian 2.6.31.6_SMP_820 #7 SMP Thu Jun 14 20:31:06 CDT 2012 armv6l GNU/Linux

root@debian:~# cat /proc/mtd
dev: size erasesize name
mtd0: 08000000 00020000 "NAND 128MiB 3,3V 8-bit"
mtd1: 00e00000 00020000 "boot"
mtd2: 07200000 00020000 "rootfs"

root@debian:~# fw_printenv
[  115.980000] uncorrectable error : 
[  115.980000] uncorrectable error : 
[  115.980000] uncorrectable error : 


.....


[  117.760000] uncorrectable error : 
[  117.760000] uncorrectable error : 
[  117.760000] uncorrectable error : 
[  117.770000] uncorrectable error : Warning: Bad CRC, using default environment
bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm
bootdelay=5
baudrate=115200


root@debian:~# mount
/dev/root on / type ext3 (rw,noatime,errors=remount-ro,user_xattr,acl,data=writeback)
devtmpfs on /dev type devtmpfs (rw,size=62632k,nr_inodes=15658,mode=755)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=12544k,mode=755)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=25080k)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /tmp type tmpfs (rw,relatime)
rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime)

root@debian:~#


---
Mod edit: add code tags



Edited 1 time(s). Last edit at 01/20/2017 05:43AM by bodhi.
Re: Need help install rootfs for Pogo Pro V3
January 20, 2017 05:51AM
Rob,

I recognize this is the old hybrid Arch/Debian installation.

To print out the u-boot envs, you need to use blparam (instead of fw_printenv):
/usr/local/cloudengines/bin/blparam

From the Debian Linux shell, you need to install u-boot:
http://forum.doozan.com/read.php?3,16017

And then boot the newly created Debian rootfs with that.

And BTW, next time, please use code tags to make the post readable!

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 20, 2017 08:05AM
bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> I recognize this is the old hybrid Arch/Debian
> installation.
>
> To print out the u-boot envs, you need to use
> blparam (instead of fw_printenv):
>
> /usr/local/cloudengines/bin/blparam
>
>
> From the Debian Linux shell, you need to install
> u-boot:
> http://forum.doozan.com/read.php?3,16017
>
> And then boot the newly created Debian rootfs with
> that.
>
> And BTW, next time, please use code tags to make
> the post readable!

Hi bodhi,

Thanks for your help and patience...

Just for sure.. do I install/flash the u-boot following the instructions 1-16 below the Updated 22 Nov 2015?

Whish me luck ;-)

Rob
Re: Need help install rootfs for Pogo Pro V3
January 20, 2017 04:32PM
Rob,

Yes. All the steps.

Quote

Updated 22 Nov 2015

I've uploaded the uboot.2015.10-tld-1 u-Boot image for Pogoplug V3 Oxnas.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 21, 2017 09:51AM
bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> Yes. All the steps.
>
>
Quote

Updated 22 Nov 2015
>
> I've uploaded the uboot.2015.10-tld-1 u-Boot image
> for Pogoplug V3 Oxnas.

bodhi,

problems.... I can't find the uboot tar file anymore.... I had extract it in /tmp on rootfs USB om my Rasberry but now the /tmp dir is empty.
I know its also in the rootfs USB Downloads directory but I cant find this folder.
Can you please give me the instruction how to copy the uboot tar file from the rootfs usb Downloads folder into the /tmp directory....

I keep the pogoplug running because I already has done step 6 (erase).

Rob
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 21, 2017 10:21AM
Roberto48 Wrote:
-------------------------------------------------------
> bodhi Wrote:
> --------------------------------------------------
> -----
> > Rob,
> >
> > Yes. All the steps.
> >
> >
Quote

Updated 22 Nov 2015
> >
> > I've uploaded the uboot.2015.10-tld-1 u-Boot
> image
> > for Pogoplug V3 Oxnas.
>
> bodhi,
>
> problems.... I can't find the uboot tar file
> anymore.... I had extract it in /tmp on rootfs USB
> om my Rasberry but now the /tmp dir is empty.
> I know its also in the rootfs USB Downloads
> directory but I cant find this folder.
> Can you please give me the instruction how to copy
> the uboot tar file from the rootfs usb Downloads
> folder into the /tmp directory....
>
> I keep the pogoplug running because I already has
> done step 6 (erase).
>
> Rob

Oh... I'm a bit confused... The Download dir is not on the rootfs but on my RPi.
So I can download the uboot file on another USB stick, put it in de Pogoplug and copy that to the /tmp dir on the progoplug
But how can I do that? That is my lack of Linux knowledge... Please help.

Rob
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 21, 2017 01:50PM
Roberto48 Wrote:
-------------------------------------------------------
> Roberto48 Wrote:
> --------------------------------------------------
> -----
> > bodhi Wrote:
> >
> --------------------------------------------------
>
> > -----
> > > Rob,
> > >
> > > Yes. All the steps.
> > >
> > >
Quote

Updated 22 Nov 2015
> > >
> > > I've uploaded the uboot.2015.10-tld-1 u-Boot
> > image
> > > for Pogoplug V3 Oxnas.
> >
> > bodhi,
> >
> > problems.... I can't find the uboot tar file
> > anymore.... I had extract it in /tmp on rootfs
> USB
> > om my Rasberry but now the /tmp dir is empty.
> > I know its also in the rootfs USB Downloads
> > directory but I cant find this folder.
> > Can you please give me the instruction how to
> copy
> > the uboot tar file from the rootfs usb
> Downloads
> > folder into the /tmp directory....
> >
> > I keep the pogoplug running because I already
> has
> > done step 6 (erase).
> >
> > Rob
>
> Oh... I'm a bit confused... The Download dir is
> not on the rootfs but on my RPi.
> So I can download the uboot file on another USB
> stick, put it in de Pogoplug and copy that to the
> /tmp dir on the progoplug
> But how can I do that? That is my lack of Linux
> knowledge... Please help.
>
> Rob

Hi bodhi,

I have succeeded to extract the uboot files from an external USB stick... pffff.
And I made the flash steps w/o errors!
The only thing is that I have added /tmp/ before the uboot images, because those files are in the /tmp/ dir.

I skipped step 12 because I'm using the serial console.
Now I'm at step 13, but how do I print uBoot envs, before I reboot?
Step 14 gives me a MAC address.

Rob
Re: Need help install rootfs for Pogo Pro V3
January 21, 2017 04:39PM
Rob,

> Now I'm at step 13, but how do I print uBoot envs,
> before I reboot?

fw_printenv


> Step 14 gives me a MAC address.

Excellent!

Now sync and reboot

sync
sync
shutdown -r now

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 22, 2017 03:46AM
bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> > Now I'm at step 13, but how do I print uBoot
> envs,
> > before I reboot?
>
>
> fw_printenv
>
>
>
> > Step 14 gives me a MAC address.
>
> Excellent!
>
> Now sync and reboot
>
>
> sync
> sync
> shutdown -r now
>

Thanks bodhi,

When I restart the Pogoplug it stops with booting the kernel. Maybe I have to make a new rootfs USB? Or using an other version for Debian? Or do I have to make a uEnv.txt file because there was a 'not found' error.
Below the startup sequence.

Rob


OX820> boot

starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found

Reset IDE: SATA PHY not ready for device 0
ide_preinit failed

Partition Map for USB device 0  --   Partition Type: DOS

Part	Start Sector	Num Sectors	UUID		Type
  1	2048      	4072448   	01f7e4b2-01	83 Boot
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **

no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 210 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
4109733 bytes read in 429 ms (9.1 MiB/s)
loading uInitrd ...
1953812 bytes read in 309 ms (6 MiB/s)
loading DTB /boot/dts/ox820-pogoplug-pro.dtb ...
7029 bytes read in 227 ms (29.3 KiB/s)
## Booting kernel from Legacy Image at 60500000 ...
   Image Name:   Linux-3.3.17.0-oxnas-tld-1
   Created:      2017-01-19  20:13:23 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4109669 Bytes = 3.9 MiB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 60e00000 ...
   Image Name:   initramfs-3.17.0-oxnas-tld-1
   Created:      2014-11-01   7:18:53 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    1953748 Bytes = 1.9 MiB
   Load Address: 60000000
   Entry Point:  60000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 62c00000
   Booting using the fdt blob at 0x62c00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 67c4e000, end 67e2afd4 ... OK
   Loading Device Tree to 67c49000, end 67c4db74 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 22, 2017 05:33AM
Roberto48 Wrote:
-------------------------------------------------------
> bodhi Wrote:
> --------------------------------------------------
> -----
> > Rob,
> >
> > > Now I'm at step 13, but how do I print uBoot
> > envs,
> > > before I reboot?
> >
> >
> > fw_printenv
> >
> >
> >
> > > Step 14 gives me a MAC address.
> >
> > Excellent!
> >
> > Now sync and reboot
> >
> >
> > sync
> > sync
> > shutdown -r now
> >
>
> Thanks bodhi,
>
> When I restart the Pogoplug it stops with booting
> the kernel. Maybe I have to make a new rootfs USB?
> Or using an other version for Debian? Or do I have
> to make a uEnv.txt file because there was a 'not
> found' error.
> Below the startup sequence.
>
> Rob
>
>
>
> OX820> boot
> 
> starting USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 3 USB Device(s)
> found
>        scanning usb for storage devices... 1
> Storage Device(s) found
> 
> Reset IDE: SATA PHY not ready for device 0
> ide_preinit failed
> 
> Partition Map for USB device 0  --   Partition
> Type: DOS
> 
> Part	Start Sector	Num Sectors	UUID		Type
>   1	2048      	4072448   	01f7e4b2-01	83 Boot
> loading envs from usb 0 ...
> ** File not found /boot/uEnv.txt **
> 
> no IDE devices available
> running scan_disk ...
> Scan device usb
> device usb 0:1
> 1 bytes read in 210 ms (0 Bytes/s)
> Found bootable drive on usb 0
> loading uImage ...
> 4109733 bytes read in 429 ms (9.1 MiB/s)
> loading uInitrd ...
> 1953812 bytes read in 309 ms (6 MiB/s)
> loading DTB /boot/dts/ox820-pogoplug-pro.dtb ...
> 7029 bytes read in 227 ms (29.3 KiB/s)
> ## Booting kernel from Legacy Image at 60500000
> ...
>    Image Name:   Linux-3.3.17.0-oxnas-tld-1
>    Created:      2017-01-19  20:13:23 UTC
>    Image Type:   ARM Linux Kernel Image
> (uncompressed)
>    Data Size:    4109669 Bytes = 3.9 MiB
>    Load Address: 60008000
>    Entry Point:  60008000
>    Verifying Checksum ... OK
> ## Loading init Ramdisk from Legacy Image at
> 60e00000 ...
>    Image Name:   initramfs-3.17.0-oxnas-tld-1
>    Created:      2014-11-01   7:18:53 UTC
>    Image Type:   ARM Linux RAMDisk Image (gzip
> compressed)
>    Data Size:    1953748 Bytes = 1.9 MiB
>    Load Address: 60000000
>    Entry Point:  60000000
>    Verifying Checksum ... OK
> ## Flattened Device Tree blob at 62c00000
>    Booting using the fdt blob at 0x62c00000
>    Loading Kernel Image ... OK
>    Loading Ramdisk to 67c4e000, end 67e2afd4 ...
> OK
>    Loading Device Tree to 67c49000, end 67c4db74
> ... OK
> 
> Starting kernel ...
> 
> Uncompressing Linux... done, booting the kernel.
> 
>


bodhi,

After I added the /boot/uEnv.txt file with ox820-pogoplug-pro.dtb, YES!! Debian was running.
Now I have to change the MAC address and hopefully I also have connection...

Thanks for all tyour help!

Rob
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 22, 2017 06:08AM
Roberto48 Wrote:
-------------------------------------------------------
> Roberto48 Wrote:
> --------------------------------------------------
> -----
> > bodhi Wrote:
> >
> --------------------------------------------------
>
> > -----
> > > Rob,
> > >
> > > > Now I'm at step 13, but how do I print
> uBoot
> > > envs,
> > > > before I reboot?
> > >
> > >
> > > fw_printenv
> > >
> > >
> > >
> > > > Step 14 gives me a MAC address.
> > >
> > > Excellent!
> > >
> > > Now sync and reboot
> > >
> > >
> > > sync
> > > sync
> > > shutdown -r now
> > >
> >
> > Thanks bodhi,
> >
> > When I restart the Pogoplug it stops with
> booting
> > the kernel. Maybe I have to make a new rootfs
> USB?
> > Or using an other version for Debian? Or do I
> have
> > to make a uEnv.txt file because there was a
> 'not
> > found' error.
> > Below the startup sequence.
> >
> > Rob
> >
> >
> >
> > OX820> boot
> > 
> > starting USB...
> > USB0:   USB EHCI 1.00
> > scanning bus 0 for devices... 3 USB Device(s)
> > found
> >        scanning usb for storage devices... 1
> > Storage Device(s) found
> > 
> > Reset IDE: SATA PHY not ready for device 0
> > ide_preinit failed
> > 
> > Partition Map for USB device 0  --   Partition
> > Type: DOS
> > 
> > Part	Start Sector	Num Sectors	UUID		Type
> >   1	2048      	4072448   	01f7e4b2-01	83 Boot
> > loading envs from usb 0 ...
> > ** File not found /boot/uEnv.txt **
> > 
> > no IDE devices available
> > running scan_disk ...
> > Scan device usb
> > device usb 0:1
> > 1 bytes read in 210 ms (0 Bytes/s)
> > Found bootable drive on usb 0
> > loading uImage ...
> > 4109733 bytes read in 429 ms (9.1 MiB/s)
> > loading uInitrd ...
> > 1953812 bytes read in 309 ms (6 MiB/s)
> > loading DTB /boot/dts/ox820-pogoplug-pro.dtb
> ...
> > 7029 bytes read in 227 ms (29.3 KiB/s)
> > ## Booting kernel from Legacy Image at 60500000
> > ...
> >    Image Name:   Linux-3.3.17.0-oxnas-tld-1
> >    Created:      2017-01-19  20:13:23 UTC
> >    Image Type:   ARM Linux Kernel Image
> > (uncompressed)
> >    Data Size:    4109669 Bytes = 3.9 MiB
> >    Load Address: 60008000
> >    Entry Point:  60008000
> >    Verifying Checksum ... OK
> > ## Loading init Ramdisk from Legacy Image at
> > 60e00000 ...
> >    Image Name:   initramfs-3.17.0-oxnas-tld-1
> >    Created:      2014-11-01   7:18:53 UTC
> >    Image Type:   ARM Linux RAMDisk Image (gzip
> > compressed)
> >    Data Size:    1953748 Bytes = 1.9 MiB
> >    Load Address: 60000000
> >    Entry Point:  60000000
> >    Verifying Checksum ... OK
> > ## Flattened Device Tree blob at 62c00000
> >    Booting using the fdt blob at 0x62c00000
> >    Loading Kernel Image ... OK
> >    Loading Ramdisk to 67c4e000, end 67e2afd4
> ...
> > OK
> >    Loading Device Tree to 67c49000, end
> 67c4db74
> > ... OK
> > 
> > Starting kernel ...
> > 
> > Uncompressing Linux... done, booting the
> kernel.
> > 
> >
>
>
> bodhi,
>
> After I added the /boot/uEnv.txt file with
> ox820-pogoplug-pro.dtb, YES!! Debian was
> running.
> Now I have to change the MAC address and hopefully
> I also have connection...
>
> Thanks for all tyour help!
>
> Rob

Hmm, not really... How can I change the MAC address? When I try it in the Uboot env I have got a message that it is not possible... I hope this is the last question for you ;-)
Rob
Re: Need help install rootfs for Pogo Pro V3
January 22, 2017 04:33PM
> Hmm, not really... How can I change the MAC
> address? When I try it in the Uboot env I have got
> a message that it is not possible... I hope this
> is the last question for you ;-)


Rob,

Congrats :)

1. If you need to use uEnv.txt to boot then it means the u-boot envs were not setup correctly in the u-boot envs area. Please get these listing and post here. In Debian,

dmesg
cat /proc/mtd
fw_printenv

2. Setting ethaddr in u-boot should be ok. Can you interrupt serial console and try it again, post the log from u-boot banner until the error message.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Need help install rootfs for Pogo Pro V3
January 22, 2017 11:32PM
bodhi Wrote:
> 2. Setting ethaddr in u-boot should be ok. Can you
> interrupt serial console and try it again, post
> the log from u-boot banner until the error
> message.

I just ran into this same problem on a "new" Dockstar (thanks, Thomas!). The error message was something like "cannot overwrite ethaddr". After booting into Debian, "fw_setenv ethaddr xx:xx..." worked.

-JT
Re: Need help install rootfs for Pogo Pro V3
January 23, 2017 12:39AM
renojim Wrote:
-------------------------------------------------------
> bodhi Wrote:
> > 2. Setting ethaddr in u-boot should be ok. Can
> you
> > interrupt serial console and try it again, post
> > the log from u-boot banner until the error
> > message.
>
> I just ran into this same problem on a "new"
> Dockstar (thanks, Thomas!). The error message was
> something like "cannot overwrite ethaddr". After
> booting into Debian, "fw_setenv ethaddr xx:xx..."
> worked.
>
> -JT

Ah. Thanks JT. It meant the u-boot inernal did not allow it. But our bootargs and DTB did specify it as writeable.

I'll look at this and netconsole strarting problem (in other thread) later.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Roberto48
Re: Need help install rootfs for Pogo Pro V3
January 23, 2017 08:04AM
bodhi Wrote:
-------------------------------------------------------
> > Hmm, not really... How can I change the MAC
> > address? When I try it in the Uboot env I have
> got
> > a message that it is not possible... I hope
> this
> > is the last question for you ;-)
>
>
> Rob,
>
> Congrats :)
>
> 1. If you need to use uEnv.txt to boot then it
> means the u-boot envs were not setup correctly in
> the u-boot envs area. Please get these listing and
> post here. In Debian,
>
>
> dmesg
> cat /proc/mtd
> fw_printenv
>
>
> 2. Setting ethaddr in u-boot should be ok. Can you
> interrupt serial console and try it again, post
> the log from u-boot banner until the error
> message.

bodhi,

Thanks! I'm glad my Pogoplug is working again...!

1- Below the listings...

2-This is what I have got when try to change MAC address

root@DebianPro:~# fw_setenv ethaddr 00:25:31:01:DE:8A
Can't overwrite "ethaddr"
root@DebianPro:~#


login as: root
root@192.168.1.3's password:
Linux DebianPro 3.17.0-oxnas-tld-1 #1 SMP PREEMPT Sat Oct 25 15:59:43 PDT 2014 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Jan 22 12:05:45 2017 from 192.168.1.5
root@DebianPro:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.17.0-oxnas-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Sat Oct 25 15:59:43 PDT 2014
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c07ac7a0, node_mem_map c7efa000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] Start Ox820 platform
[    0.000000] PERCPU: Embedded 7 pages/cpu @c7ee3000 s6592 r8192 d13888 u32768
[    0.000000] pcpu-alloc: s6592 r8192 d13888 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data)
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 119844K/131072K available (5686K kernel code, 286K rwdata, 1680K rodata, 174K init, 233K bss, 11228K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0739db0   (7368 kB)
[    0.000000]       .init : 0xc073a000 - 0xc07659c0   ( 175 kB)
[    0.000000]       .data : 0xc0766000 - 0xc07adb00   ( 287 kB)
[    0.000000]        .bss : 0xc07adb00 - 0xc07e809c   ( 234 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns
[    0.000184] Console: colour dummy device 80x30
[    0.000212] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050050] pid_max: default: 32768 minimum: 301
[    0.050222] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050240] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051069] Initializing cgroup subsys net_cls
[    0.051130] CPU: Testing write buffer coherency: ok
[    0.051520] Setting up static identity map for 0x60567fa0 - 0x60567fd8
[    0.110448] CPU1: Booted secondary processor
[    0.170142] Brought up 2 CPUs
[    0.170165] SMP: Total of 2 processors activated.
[    0.171097] devtmpfs: initialized
[    0.175106] prandom: seed boundary self test passed
[    0.179025] prandom: 100 self tests passed
[    0.179048] pinctrl core: initialized pinctrl subsystem
[    0.181708] NET: Registered protocol family 16
[    0.182246] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.186575] gpio-oxnas 44000000.gpio: at address c8846000
[    0.186867] gpio-oxnas 44100000.gpio: at address c8848000
[    0.187407] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.308436] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5
[    0.308554] oxnas-pcie 47c0: link up
[    0.308797] oxnas-pcie 47c0: PCI host bridge to bus 0000:00
[    0.308823] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.308840] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.308861] pci_bus 0000:00: root bus resource [io  0x4be00000-0x4befffff]
[    0.308881] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.308935] pci 0000:00:00.0: [1814:3090] type 00 class 0x028000
[    0.308974] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[    0.309324] PCI: bus0: Fast back to back transfers disabled
[    0.309401] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff]
[    0.309785] vgaarb: loaded
[    0.310323] SCSI subsystem initialized
[    0.310648] libata version 3.00 loaded.
[    0.311219] usbcore: registered new interface driver usbfs
[    0.311329] usbcore: registered new interface driver hub
[    0.311531] usbcore: registered new device driver usb
[    0.311651] pps_core: LinuxPPS API ver. 1 registered
[    0.311667] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.311733] PTP clock support registered
[    0.313262] cfg80211: Calling CRDA to update world regulatory domain
[    0.313751] Switched to clocksource rps_clocksource_timer
[    0.328025] NET: Registered protocol family 2
[    0.329141] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.329185] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.329218] TCP: Hash tables configured (established 1024 bind 1024)
[    0.329305] TCP: reno registered
[    0.329331] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.329372] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.329674] NET: Registered protocol family 1
[    0.330201] RPC: Registered named UNIX socket transport module.
[    0.330222] RPC: Registered udp transport module.
[    0.330234] RPC: Registered tcp transport module.
[    0.330245] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.330298] PCI: CLS 32 bytes, default 32
[    0.330634] Unpacking initramfs...
[    0.530329] Freeing initrd memory: 1904K (c7c4e000 - c7e2a000)
[    0.531448] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.550315] NFS: Registering the id_resolver key type
[    0.550384] Key type id_resolver registered
[    0.550400] Key type id_legacy registered
[    0.550438] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.550458] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.551342] fuse init (API version 7.23)
[    0.552704] msgmni has been set to 237
[    0.553205] Key type big_key registered
[    0.557002] alg: No test for stdrng (krng)
[    0.631360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.631393] io scheduler noop registered
[    0.631416] io scheduler deadline registered
[    0.631777] io scheduler cfq registered (default)
[    0.632332] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.633605] console [ttyS0] disabled
[    0.633728] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[    1.188623] console [ttyS0] enabled
[    1.193856] scsi host0: sata_oxnas
[    1.197821] ata1: SATA max UDMA/133 irq 50
[    1.202247] ox820sata: reseting SATA core
[    1.211696] nand: Could not find valid ONFI parameter page; aborting
[    1.218060] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.224409] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.228833] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[    1.234485] Scanning device for bad blocks
[    1.320279] 2 cmdlinepart partitions found on MTD device 41000000.nand
[    1.326794] Creating 2 MTD partitions on "41000000.nand":
[    1.332183] 0x000000000000-0x000000e00000 : "boot"
[    1.338329] 0x000000e00000-0x000008000000 : "data"
[    1.345013] stmmaceth 40400000.ethernet: no reset control found
[    1.350942] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    1.355965]  Ring mode enabled
[    1.358999]  DMA HW capability register supported
[    1.363517]  Enhanced/Alternate descriptors
[    1.367848]  Enabled extended descriptors
[    1.371847]  RX Checksum Offload Engine supported (type 2)
[    1.377303]  TX Checksum insertion supported
[    1.381557]  Wake-Up On Lan supported
[    1.385200]  Enable RX Mitigation via HW Watchdog Timer
[    1.411258] libphy: stmmac: probed
[    1.414658] eth0: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    1.421004] eth0: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    1.426851] PPP generic driver version 2.4.2
[    1.431488] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142)
[    1.437777] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
[    1.449064] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[    1.456317] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    1.457927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.464476] ehci-pci: EHCI PCI platform driver
[    1.469258] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    1.474803] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    1.482588] oxnas-ehci 40200100.ehci: irq 39, io mem 0x40200100
[    1.500549] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    1.506841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.513633] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.520837] usb usb1: Product: EHCI Host Controller
[    1.525690] usb usb1: Manufacturer: Linux 3.17.0-oxnas-tld-1 ehci_hcd
[    1.532113] usb usb1: SerialNumber: 40200100.ehci
[    1.537635] hub 1-0:1.0: USB hub found
[    1.541480] hub 1-0:1.0: 2 ports detected
[    1.546114] usbcore: registered new interface driver cdc_acm
[    1.551779] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.559848] usbcore: registered new interface driver cdc_wdm
[    1.565708] usbcore: registered new interface driver usb-storage
[    1.570027] ata1: SATA link down (SStatus 0 SControl 310)
[    1.577323] usbcore: registered new interface driver usbserial
[    1.583247] usbcore: registered new interface driver usbserial_generic
[    1.589808] usbserial: USB Serial support registered for generic
[    1.596113] mousedev: PS/2 mouse device common for all mice
[    1.601722] i2c /dev entries driver
[    1.606333] usbcore: registered new interface driver usbhid
[    1.611916] usbhid: USB HID core driver
[    1.616069] TCP: cubic registered
[    1.620482] NET: Registered protocol family 10
[    1.626421] sit: IPv6 over IPv4 tunneling driver
[    1.632046] NET: Registered protocol family 17
[    1.636636] Key type dns_resolver registered
[    1.645429] Freeing unused kernel memory: 172K (c073a000 - c0765000)
[    1.776499] udevd[67]: starting version 175
[    1.860779] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    2.013652] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.026882] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.048990] usb 1-1: Product: USB2.0 Hub
[    2.057221] hub 1-1:1.0: USB hub found
[    2.063710] hub 1-1:1.0: 4 ports detected
[    2.370411] usb 1-1.4: new high-speed USB device number 3 using oxnas-ehci
[    2.482649] usb 1-1.4: New USB device found, idVendor=090c, idProduct=1000
[    2.489497] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.496811] usb 1-1.4: Product: USB DISK
[    2.500736] usb 1-1.4: Manufacturer: SMI Corporation
[    2.505676] usb 1-1.4: SerialNumber: AA330463000360005441
[    2.513100] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[    2.519872] scsi host1: usb-storage 1-1.4:1.0
[    2.539548] usbcore: registered new interface driver uas
[    3.521512] scsi 1:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 0 CCS
[    3.533555] sd 1:0:0:0: [sda] 4074496 512-byte logical blocks: (2.08 GB/1.94 GiB)
[    3.542976] sd 1:0:0:0: [sda] Write Protect is off
[    3.547776] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[    3.548613] sd 1:0:0:0: [sda] No Caching mode page found
[    3.554009] sd 1:0:0:0: [sda] Assuming drive cache: write through
[    3.569246]  sda: sda1
[    3.575493] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   12.346882] EXT3-fs (sda1): recovery required on readonly filesystem
[   12.353308] EXT3-fs (sda1): write access will be enabled during recovery
[   12.752657] kjournald starting.  Commit interval 5 seconds
[   12.756976] EXT3-fs (sda1): recovery complete
[   12.756984] EXT3-fs (sda1): mounted filesystem with ordered data mode
[   14.207603] udevd[257]: starting version 175
[   16.245468] random: nonblocking pool is initialized
[   16.463754] EXT3-fs (sda1): using internal journal
[   27.370708] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
root@DebianPro:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00e00000 00020000 "boot"
mtd1: 07200000 00020000 "data"
root@DebianPro:~# fw_printenv
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi
bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
usb_custom_params=zswap.enabled=1
device=0:1
devices=usb ide
disks=0 1 2 3
ethaddr=52:3b:20:9c:11:51
ethact=mii0
if_netconsole=ping $serverip
ipaddr=192.168.0.222
serverip=192.168.0.220
dtb_file=/boot/dts/ox820-pogoplug-pro.dtb
load_dtb=echo loading DTB $dtb_file ...; ext2load $bootdev $device 0x62c00000 $dtb_file
load_initrd=echo loading uInitrd ...; ext2load $bootdev $device 0x60e00000 /boot/uInitrd
load_uimage=echo loading uImage ...; ext2load $bootdev $device 0x60500000 /boot/uImage
mainlineLinux=yes
mtdids=nand0=41000000.nand
mtdparts=mtdparts=41000000.nand:14m(boot),-(data)
preboot_nc=run if_netconsole start_netconsole
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start";  setenv scan_ide "ide reset";  setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if ext2load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_import=echo importing envs ...; env import -t 0x60500000
uenv_init_devices=setenv init_usb "usb start";  setenv init_ide "ide reset";  setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices;  do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read;  fi; else if $devtype part $disknum; then run uenv_read; fi;  fi
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi
usb_ready_retry=15
athaddr=00:25:31:01:DE:8A
root@DebianPro:~#

Re: Need help install rootfs for Pogo Pro V3
January 23, 2017 02:29PM
Re: Need help install rootfs for Pogo Pro V3
January 23, 2017 05:19PM
Roberto48 Wrote:
> 2-This is what I have got when try to change MAC address
>
>
root@DebianPro:~# fw_setenv ethaddr 00:25:31:01:DE:8A
Can't overwrite "ethaddr"

Wow, that's different than my experience on my Dockstar. I got that message when trying to do setenv from the u-boot prompt, but doing it within Debian worked. I have a PogoPlug E02 that I'm about to update the u-boot, so it will be interesting to see what happens there.

-JT
Re: Need help install rootfs for Pogo Pro V3
January 23, 2017 07:09PM
JT,

Different boxes. And yours was restricted by u-boot. Rob's was restricted by the kernel.

Either way, I will need to look at these scenarios to rectify t before releasing new version of each.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: