GoFlexHome not booting May 09, 2017 10:38AM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting May 09, 2017 11:44AM |
Admin Registered: 13 years ago Posts: 18,570 |
Quote
Updated 20 Feb 2016:
This Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 is to keep in sync with kernel Linux-4.4.0-kirkwood-tld-1.
Re: GoFlexHome not booting May 09, 2017 02:55PM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting May 17, 2017 05:29PM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting May 18, 2017 01:31AM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: GoFlexHome not booting May 18, 2017 05:26PM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting May 19, 2017 12:34AM |
Admin Registered: 13 years ago Posts: 18,570 |
Quote
A. Flashing Instruction:
Installation is the same for each u-Boot image, the instruction below is written to include all boxes. So choose the platform name that you are installing for, and copy/paste the appropriate commands.
If you are running kernel that do not provide mtd-utils and uboot-tools (fw_setenv, fw_printenv, flash_erase, nandwrite), you can download the NAND and U-Boot tools binaries here in this thread.
Re: GoFlexHome not booting May 19, 2017 11:28AM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting May 19, 2017 12:32PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: GoFlexHome not booting May 20, 2017 11:38AM |
Registered: 6 years ago Posts: 337 |
Quote
Updated 20 Feb 2016:
This Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 is to keep in sync with kernel Linux-4.4.0-kirkwood-tld-1.
cd /media/sdb1/boot cp -a zImage-4.4.0-kirkwood-tld-1 zImage.fdt cat dts/kirkwood-goflexnet.dtb >> zImage.fdt mv uImage uImage.orig mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.4.0-kirkwood-tld-1 -d zImage.fdt uImage sync
Quote
Note: if your Linux box does not have mkimage, then install it
apt-get install u-boot-tools
Re: GoFlexHome not booting May 20, 2017 11:57AM |
Admin Registered: 13 years ago Posts: 18,570 |
Quote
4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Skip this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time).
Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box (see the folder /media/sdb1/boot/dts).
Generate the uImage with DTB embedded inside:
cd /media/sdb1/boot
cp -a zImage-4.4.0-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-goflexnet.dtb >> zImage.fdt
mv uImage uImage.orig
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.4.0-kirkwood-tld-1 -d zImage.fdt uImage
sync
Note: if your Linux box does not have mkimage, then install it
apt-get install u-boot-tools
Re: GoFlexHome not booting May 24, 2017 05:36AM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting May 24, 2017 12:40PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: GoFlexHome not booting May 29, 2017 07:01AM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting May 29, 2017 10:59AM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: GoFlexHome not booting June 01, 2017 05:44PM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting June 02, 2017 12:48PM |
Admin Registered: 13 years ago Posts: 18,570 |
Quote
Serial Console & JTAG console
Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD
Serial Port connector - what are people using to make it work
Serial Console hookup - GoFlex Net (external link)
Serial Console hookup - Pogoplug E02 and Pogoplug Pro V3 (external link)
OSX Serial/Net Console
Use Phone Jack - Phone Jack Serial Console Pics
Adding serial connector to Pogoplug Mobile (external link)
WD Mycloud EX2100/4100 Serial Console pic1, also pic2, pic3
Re: GoFlexHome not booting June 12, 2017 05:41PM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting June 13, 2017 12:05AM |
Admin Registered: 13 years ago Posts: 18,570 |
Quote
Serial Console & JTAG console
Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD
Serial Port connector - what are people using to make it work
Serial Console hookup - GoFlex Net (external link)
Serial Console hookup - Pogoplug E02 and Pogoplug Pro V3 (external link)
OSX Serial/Net Console
Use Phone Jack - Phone Jack Serial Console Pics
Adding serial connector to Pogoplug Mobile (external link)
WD Mycloud EX2100/4100 Serial Console pic1, also pic2, pic3
Dreamplug Serial Console
Re: GoFlexHome not booting June 15, 2017 04:19AM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting June 15, 2017 02:45PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: GoFlexHome not booting June 15, 2017 06:47PM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting June 15, 2017 07:01PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: GoFlexHome not booting June 19, 2017 10:27PM |
Registered: 6 years ago Posts: 337 |
Re: GoFlexHome not booting June 20, 2017 12:07AM |
Admin Registered: 13 years ago Posts: 18,570 |