Help with booting Pogo V4 September 28, 2020 11:08PM |
Registered: 10 years ago Posts: 12 |
# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.pogo_v4.mtd0.kwb -p pogoV4_basic.patch Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [......................................................................] 5 % [......................................................................] 6 % [......................................................................] 8 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 13 % [......................................................................] 15 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 20 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 25 % [......................................................................] 27 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 32 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 37 % [......................................................................] 39 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 44 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 49 % [......................................................................] 51 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 56 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 61 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 66 % [......................................................................] 68 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 73 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 78 % [......................................................................] 80 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 85 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 90 % [......................................................................] 92 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 97 % [......................................................................] 99 % [....................................] [Type Ctrl-\ + c to quit] U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: MVEBU_MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Reset IDE: ide_preinit failed Card did not respond to voltage select! mmc_init: -95, time 14 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** Bad device usb 0 ** no IDE devices available Card did not respond to voltage select! mmc_init: -95, time 14 running scan_disk ... Scan device usb device usb 0:1 ** Bad device usb 0 ** device usb 1:1 ** Bad device usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device ide Reset IDE: ide_preinit failed device ide 0:1 ** Bad device ide 0 ** device ide 1:1 ** Bad device ide 1 ** device ide 2:1 ** Bad device ide 2 ** device ide 3:1 ** Bad device ide 3 ** Scan device mmc Card did not respond to voltage select! mmc_init: -95, time 14 device mmc 0:1 Card did not respond to voltage select! mmc_init: -95, time 14 Card did not respond to voltage select! mmc_init: -95, time 14 ** Bad device mmc 0 ** device mmc 1:1 MMC Device 1 not found MMC Device 1 not found ** Bad device mmc 1 ** device mmc 2:1 MMC Device 2 not found MMC Device 2 not found ** Bad device mmc 2 ** device mmc 3:1 MMC Device 3 not found MMC Device 3 not found ** Bad device mmc 3 ** loading uImage ... ** Bad device usb 0 ** loading uInitrd ... ** Bad device usb 0 ** loading DTB /boot/dts/kirkwood-pogoplug_v4 ... ** Bad device usb 0 ** Unknown command 'bootm0x800000' - try 'help' resetting ... U-Boot 2020.04 (Sep 22 2020 - 18:58:26 +0000) Pogoplug V4 SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB NAND: 128 MiB MMC: Loading Environment from NAND... OK In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 pogoplugv4>
pogoplugv4> printenv baudrate=115200 bootcmd=ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm bootdelay=3 bootdev=$dev console=console=ttyS0,115200 device=$disknum:1 ethact=egiga0 ethaddr=00:25:31:05:F9:62 led_errorsetenv=load_dtb_addr 0x1c00000 load_dtb=g DTB $dtb_file ... load_initd_initrd_addr=/boot/uInitrd load_uimage=... machid=0ion_nand mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:0x1c0000(uboot),0x40000(uboot_env),0x7e00000(ubi) partitioneboot_nc=run if_netconsole start_netconsole scan_disk_disk=... scan_ide="ide reset" scan_mmc="mmc rescan" scan_usb="usb start" stderr=serial stdin=serial stdout=serial uenv_loaded=0 uenv_read=mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) Environment size: 980/131068 bytes pogoplugv4>
Re: Help with booting Pogo V4 September 28, 2020 11:59PM |
Admin Registered: 13 years ago Posts: 18,821 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4
printenvAnd post the serial console log here.
Re: Help with booting Pogo V4 September 29, 2020 01:26AM |
Registered: 10 years ago Posts: 12 |
Pogov4> printenv arcNumber=2097 baudrate=115200 bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb console=ttyS0,115200 device=0:1 devices=usb ide disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-goflexnet.dtb ethact=egiga0 ethaddr=00:00:00:00:00:00 (NOT POSTING HERE JUST FOR CAUTION) fileaddr=800000 filesize=ca0 if_netconsole=ping $serverip init_ide=ide reset init_mmc=mmc rescan init_usb=usb start ipaddr=192.168.0.231 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 machid=0x831 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done scan_ide=ide reset scan_mmc=mmc rescan scan_usb=usb start serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_loaded=0 uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 3200/131068 bytes Pogov4>
Re: Help with booting Pogo V4 September 29, 2020 04:44AM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
Updated 25 Aug 2019:
Basic Debian buster Kirkwood rootfs for most Kirwood plugs:
- tarball size: 209M
- install size: 536M
- The init system used in this rootfs is sysvinit . To boot with systemd, see note 2 below.
- Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, sysvinit-utils, u-boot-tools, and mtd-utils.
- see LED controls in /etc/rc.local, and /etc/init.d/halt
- see some useful aliases in /root/.profile
- root password: root
Download at Dropbox:
Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
setenv dtb_file '/boot/dts/kirkwood-pogoplug_v4.dtb' setenv mtdparts 'mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)'and then boot
boot
Re: Help with booting Pogo V4 September 30, 2020 01:24AM |
Registered: 10 years ago Posts: 12 |
# kwboot -t /dev/ttyUSB0 -b uboot.2017.07-tld-1.pogo_v4.mtd0.kwb -p pogoV4_basic.patch Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [......................................................................] 5 % [......................................................................] 6 % [......................................................................] 8 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 13 % [......................................................................] 15 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 20 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 25 % [......................................................................] 27 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 32 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 37 % [......................................................................] 39 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 44 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 49 % [......................................................................] 51 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 56 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 61 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 66 % [......................................................................] 68 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 73 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 78 % [......................................................................] 80 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 85 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 90 % [......................................................................] 92 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 97 % [......................................................................] 99 % [....................................] [Type Ctrl-\ + c to quit] U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) Use USB retry period from the environment: 15 second(s) Device NOT ready Request Sense returned 02 3A 00 1 Storage Device(s) found Reset IDE: ide_preinit failed Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 3968000 ccacfed9-01 83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available running scan_disk ... Scan device usb device usb 0:1 ** File not found /boot/uImage ** device usb 1:1 ** Bad device size - usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device ide Reset IDE: ide_preinit failed device ide 0:1 ** Bad device ide 0 ** device ide 1:1 ** Bad device ide 1 ** device ide 2:1 ** Bad device ide 2 ** device ide 3:1 ** Bad device ide 3 ** loading uImage ... ** File not found /boot/uImage ** loading uInitrd ... ** File not found /boot/uInitrd ** loading DTB /boot/dts/kirkwood-goflexnet.dtb ... ** File not found /boot/dts/kirkwood-goflexnet.dtb ** Wrong Image Format for bootm command ERROR: can't get kernel image! Pogov4>
Pogov4> printenv arcNumber=2097 baudrate=115200 bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb console=ttyS0,115200 device=0:1 devices=usb ide disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-goflexnet.dtb ethact=egiga0 ethaddr=XX:XX:XX:XX:XX:XX fileaddr=800000 filesize=ca0 if_netconsole=ping $serverip init_ide=ide reset init_mmc=mmc rescan init_usb=usb start ipaddr=192.168.0.231 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 machid=0x831 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done scan_ide=ide reset scan_mmc=mmc rescan scan_usb=usb start serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_loaded=0 uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 3200/131068 bytes Pogov4>
Re: Help with booting Pogo V4 September 30, 2020 01:51AM |
Registered: 10 years ago Posts: 12 |
# kwboot -t /dev/ttyUSB0 -b uboot.2017.07-tld-1.pogo_v4.mtd0.kwb -p pogoV4_basic.patch Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [......................................................................] 5 % [......................................................................] 6 % [......................................................................] 8 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 13 % [......................................................................] 15 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 20 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 25 % [......................................................................] 27 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 32 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 37 % [......................................................................] 39 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 44 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 49 % [......................................................................] 51 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 56 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 61 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 66 % [......................................................................] 68 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 73 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 78 % [......................................................................] 80 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 85 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 90 % [......................................................................] 92 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 97 % [......................................................................] 99 % [....................................] [Type Ctrl-\ + c to quit] U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) Use USB retry period from the environment: 15 second(s) Device NOT ready Request Sense returned 02 3A 00 1 Storage Device(s) found Reset IDE: ide_preinit failed Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 3968000 ccacfed9-01 83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 538 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 4963680 bytes read in 1138 ms (4.2 MiB/s) loading uInitrd ... 9713936 bytes read in 1354 ms (6.8 MiB/s) loading DTB /boot/dts/kirkwood-goflexnet.dtb ... 11445 bytes read in 1523 ms (6.8 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:31 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4963616 Bytes = 4.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:50 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 071c6000, end 07b098d0 ... OK Loading Device Tree to 071c0000, end 071c5cb4 ... OK Using machid 0x831 from environment Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Seagate GoFlex Net [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000][ T0] Memory: 104832K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26240K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000012][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000072][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.001209][ T0] Console: colour dummy device 80x30 [ 0.001285][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.001326][ T0] pid_max: default: 32768 minimum: 301 [ 0.001882][ T0] LSM: Security Framework initializing [ 0.002165][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002208][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003525][ T0] *** VALIDATE proc *** [ 0.003921][ T0] *** VALIDATE cgroup1 *** [ 0.003961][ T0] *** VALIDATE cgroup2 *** [ 0.004111][ T0] CPU: Testing write buffer coherency: ok [ 0.006737][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.007192][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.007644][ T1] rcu: Hierarchical SRCU implementation. [ 0.012674][ T1] devtmpfs: initialized [ 0.021017][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021066][ T1] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.021445][ T1] xor: measuring software checksum speed [ 0.120177][ T1] arm4regs : 725.200 MB/sec [ 0.220117][ T1] 8regs : 435.600 MB/sec [ 0.320108][ T1] 32regs : 633.200 MB/sec [ 0.320137][ T1] xor: using function: arm4regs (725.200 MB/sec) [ 0.320170][ T1] prandom: seed boundary self test passed [ 0.326433][ T1] prandom: 100 self tests passed [ 0.326451][ T1] pinctrl core: initialized pinctrl subsystem [ 0.328630][ T1] NET: Registered protocol family 16 [ 0.329530][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.330892][ T1] audit: initializing netlink subsys (disabled) [ 0.332787][ T14] audit: type=2000 audit(0.330:1): state=initialized audit_enabled=0 res=1 [ 0.332973][ T1] cpuidle: using governor ladder [ 0.333088][ T1] cpuidle: using governor menu [ 0.333902][ T1] Feroceon L2: Enabling L2 [ 0.333974][ T1] Feroceon L2: Cache support initialised. [ 0.342121][ T1] No ATAGs? [ 2.560082][ C0] random: fast init done [ 9.235767][ T71] alg: No test for lzo-rle (lzo-rle-generic) [ 9.236249][ T73] alg: No test for lzo-rle (lzo-rle-scomp) [ 9.420691][ T1] raid6: int32x8 gen() 86 MB/s [ 9.590694][ T1] raid6: int32x8 xor() 58 MB/s [ 9.760573][ T1] raid6: int32x4 gen() 88 MB/s [ 9.930177][ T1] raid6: int32x4 xor() 57 MB/s [ 10.100628][ T1] raid6: int32x2 gen() 93 MB/s [ 10.270321][ T1] raid6: int32x2 xor() 66 MB/s [ 10.440566][ T1] raid6: int32x1 gen() 75 MB/s [ 10.610520][ T1] raid6: int32x1 xor() 50 MB/s [ 10.610536][ T1] raid6: using algorithm int32x2 gen() 93 MB/s [ 10.610549][ T1] raid6: .... xor() 66 MB/s, rmw enabled [ 10.610561][ T1] raid6: using intx1 recovery algorithm [ 10.610935][ T1] vgaarb: loaded [ 10.611685][ T1] SCSI subsystem initialized [ 10.612410][ T1] usbcore: registered new interface driver usbfs [ 10.612521][ T1] usbcore: registered new interface driver hub [ 10.612640][ T1] usbcore: registered new device driver usb [ 10.612903][ T1] pps_core: LinuxPPS API ver. 1 registered [ 10.612921][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 10.612960][ T1] PTP clock support registered [ 10.614867][ T1] clocksource: Switched to clocksource orion_clocksource [ 12.160053][ T1] VFS: Disk quotas dquot_6.6.0 [ 12.160189][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.173893][ T1] NET: Registered protocol family 2 [ 12.175193][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 12.175243][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 12.175278][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 12.175309][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 12.175453][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 12.175492][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 12.175818][ T1] NET: Registered protocol family 1 [ 12.176758][ T1] RPC: Registered named UNIX socket transport module. [ 12.176779][ T1] RPC: Registered udp transport module. [ 12.176791][ T1] RPC: Registered tcp transport module. [ 12.176804][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.176826][ T1] PCI: CLS 0 bytes, default 32 [ 12.177170][ T1] Trying to unpack rootfs image as initramfs... [ 13.423048][ T1] Freeing initrd memory: 9488K [ 13.423325][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 13.425241][ T1] Initialise system trusted keyrings [ 13.425312][ T1] Key type blacklist registered [ 13.425629][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 13.425785][ T1] zbud: loaded [ 13.427415][ T1] NFS: Registering the id_resolver key type [ 13.427462][ T1] Key type id_resolver registered [ 13.427477][ T1] Key type id_legacy registered [ 13.427506][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 13.427530][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 13.427948][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 13.428295][ T1] fuse: init (API version 7.31) [ 13.428874][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 13.429147][ T1] orangefs_init: module version upstream loaded [ 13.429165][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 13.454060][ T1] async_tx: api initialized (async) [ 13.454097][ T1] Key type asymmetric registered [ 13.454112][ T1] Asymmetric key parser 'x509' registered [ 13.454220][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 13.456472][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 13.459449][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 13.516073][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 13.519030][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 13.576082][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 13.579446][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 13.581219][ T1] printk: console [ttyS0] disabled [ 13.581326][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 14.329751][ T1] printk: console [ttyS0] enabled [ 14.345742][ T1] loop: module loaded [ 14.350371][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 14.359925][ T1] scsi host0: sata_mv [ 14.364609][ T1] scsi host1: sata_mv [ 14.368969][ T1] ata1: SATA max UDMA/133 irq 32 [ 14.373746][ T1] ata2: SATA max UDMA/133 irq 32 [ 14.380219][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 14.387395][ T1] nand: Hynix H27U1G8F2BTR-BC [ 14.391918][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 14.400203][ T1] Scanning device for bad blocks [ 14.411587][ T1] Bad eraseblock 58 at 0x000000740000 [ 14.525254][ T1] 4 cmdlinepart partitions found on MTD device orion_nand [ 14.532193][ T1] Creating 4 MTD partitions on "orion_nand": [ 14.538043][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 14.545631][ T1] 0x000000100000-0x000000500000 : "uImage" [ 14.553064][ T1] 0x000000500000-0x000002500000 : "rootfs" [ 14.560661][ T1] 0x000002500000-0x000008000000 : "data" [ 14.570088][ T1] libphy: Fixed MDIO Bus: probed [ 14.576081][ T1] libphy: orion_mdio_bus: probed [ 14.601698][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 14.610020][ T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 14.708244][ T112] ata1: SATA link down (SStatus 0 SControl F300) [ 15.056614][ T114] ata2: SATA link down (SStatus 0 SControl F300) [ 15.335858][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:f9:62 [ 15.345459][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.352694][ T1] ehci-pci: EHCI PCI platform driver [ 15.357925][ T1] ehci-orion: EHCI orion driver [ 15.362904][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 15.369160][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 15.377751][ T1] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 15.404924][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 15.411990][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 15.420957][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.428875][ T1] usb usb1: Product: EHCI Host Controller [ 15.434429][ T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd [ 15.441739][ T1] usb usb1: SerialNumber: f1050000.ehci [ 15.447994][ T1] hub 1-0:1.0: USB hub found [ 15.452485][ T1] hub 1-0:1.0: 1 port detected [ 15.458163][ T1] usbcore: registered new interface driver usb-storage [ 15.465453][ T1] mousedev: PS/2 mouse device common for all mice [ 15.824915][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 16.126880][ T15] usb 1-1: New USB device found, idVendor=0bda, idProduct=0307, bcdDevice= 1.20 [ 16.135776][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 16.143583][ T15] usb 1-1: Product: USB3.0 Card Reader [ 16.148908][ T15] usb 1-1: Manufacturer: Realtek [ 16.153695][ T15] usb 1-1: SerialNumber: 201006010301 [ 16.164977][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 16.172352][ T15] scsi host2: usb-storage 1-1:1.0 [ 16.484915][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 16.491234][ T1] i2c /dev entries driver [ 16.496354][ T1] device-mapper: uevent: version 1.0.3 [ 16.502066][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 16.511799][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 16.519096][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 16.526442][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 16.533822][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 16.540624][ T1] device-mapper: raid: Loading target version 1.14.0 [ 16.550297][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 16.556904][ T1] drop_monitor: Initializing network drop monitor service [ 16.564300][ T1] NET: Registered protocol family 17 [ 16.569826][ T1] Key type dns_resolver registered [ 16.575993][ T1] registered taskstats version 1 [ 16.580770][ T1] Loading compiled-in X.509 certificates [ 16.586382][ T1] zswap: loaded using pool lzo/zbud [ 16.724736][ T1] Key type big_key registered [ 16.790015][ T1] Key type encrypted registered [ 16.797635][ T1] hctosys: unable to open rtc device (rtc0) [ 16.808452][ T1] Freeing unused kernel memory: 1024K [ 16.815849][ T1] Checked W+X mappings: passed, no W+X pages found [ 16.822182][ T1] Run /init as init process Loading, please wait... Starting version 241 [ 17.223263][ T23] scsi 2:0:0:0: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 0 CCS [ 17.265586][ T23] scsi 2:0:0:1: Direct-Access Generic- USB3.0 CRW -MS 1.00 PQ: 0 ANSI: 0 CCS [ 17.929852][ T7] sd 2:0:0:0: [sda] 3970048 512-byte logical blocks: (2.03 GB/1.89 GiB) [ 17.944082][ T116] sd 2:0:0:1: [sdb] Attached SCSI removable disk [ 17.954209][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 17.972343][ T7] sd 2:0:0:0: [sda] No Caching mode page found [ 17.992015][ T7] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 18.018123][ T7] sda: sda1 [ 18.029452][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 18.229845][ T166] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: clean, 15078/124160 files, 150191/496000 blocks done. [ 29.633214][ T192] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 29.745395][ T192] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.93 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Starting hotplug events dispatcher: systemd-udevd. [ ok ] Synthesizing the initial hotplug events (subsystems)...done. [ ok ] Synthesizing the initial hotplug events (devices)...done. [....] Waiting for /dev to be fully populated...[ 35.000945][ T372] systemd-udevd[372]: Using default interface naming scheme 'v240'. [ 35.193178][ T372] systemd-udevd[372]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 35.401744][ C0] random: crng init done [ 35.532766][ T373] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ 35.658892][ T373] watchdog: f1020300.watchdog-timer: falling back to default timeout (25) [ 35.765144][ T373] orion_wdt: Initial timeout 25 sec [ 35.840580][ T375] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 35.894356][ T375] sd 2:0:0:1: Attached scsi generic sg1 type 0 [ 36.016714][ T374] marvell-cesa f1030000.crypto: CESA device successfully registered [ 36.131818][ T404] systemd-udevd[404]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. done. [ ok ] Setting hostname to 'debian'...done. [ ok ] Activating swap:. [ 37.890975][ T588] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [info] Will now check all file systems. fsck from util-linux 2.33.1 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable.. [ ok ] Cleaning up temporary files.... [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Starting Setting kernel variables: sysctl. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:05:f9:62 Sending on LPF/eth0/00:25:31:05:f9:62 Sending on Socket/fallback DHCPREQUEST for 192.168.0.15 on eth0 to 255.255.255.255 port 67 [ 47.165032][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled DHCPREQUEST for 192.168.0.15 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1
Re: Help with booting Pogo V4 September 30, 2020 02:11AM |
Admin Registered: 13 years ago Posts: 18,821 |
setenv dtb_file '/boot/dts/kirkwood-pogoplug_v4.dtb' setenv mtdparts 'mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)'
Re: Help with booting Pogo V4 September 30, 2020 02:36AM |
Registered: 10 years ago Posts: 12 |
# kwboot -t /dev/ttyUSB0 -b uboot.2017.07-tld-1.pogo_v4.mtd0.kwb -p pogoV4_basic.patch Sending boot message. Please reboot the target...\ Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [......................................................................] 5 % [......................................................................] 6 % [......................................................................] 8 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 13 % [......................................................................] 15 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 20 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 25 % [......................................................................] 27 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 32 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 37 % [......................................................................] 39 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 44 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 49 % [......................................................................] 51 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 56 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 61 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 66 % [......................................................................] 68 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 73 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 78 % [......................................................................] 80 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 85 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 90 % [......................................................................] 92 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 97 % [......................................................................] 99 % [....................................] [Type Ctrl-\ + c to quit] U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 Pogov4> usb start starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) Use USB retry period from the environment: 15 second(s) Device NOT ready Request Sense returned 02 3A 00 1 Storage Device(s) found Pogov4> ext2load usb 0:1 0x800000 /boot/uboot.2016.05-tld-1.environment.scr 3232 bytes read in 307 ms (9.8 KiB/s) Pogov4> source 0x800000 ## Executing script at 00800000 Warning: egiga0 MAC addresses don't match: Address in SROM is 52:3b:20:9c:11:51 Address in environment is 00:25:31:05:f9:62 Pogov4> printenv arcNumber=2097 baudrate=115200 bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb console=ttyS0,115200 device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-pogo_e02.dtb ethact=egiga0 ethaddr=52:3b:20:9c:11:51 fileaddr=800000 filesize=ca0 if_netconsole=ping $serverip init_ide=ide reset init_mmc=mmc rescan init_usb=usb start ipaddr=192.168.0.231 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 machid=0x831 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done scan_ide=ide reset scan_mmc=mmc rescan scan_usb=usb start serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_loaded=0 uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 3203/131068 bytes Pogov4> setenv devices 'usb ide' Pogov4> setenv ethaddr 00:25:31:05:F9:62 Warning: egiga0 MAC addresses don't match: Address in SROM is 00:25:31:05:f9:62 Address in environment is 52:3b:20:9c:11:51 Pogov4> setenv dtb_file '/boot/dts/kirkwood-pogoplug_v4.dtb' Pogov4> setenv mtdparts 'mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)' Pogov4> saveenv Saving Environment to NAND... Erasing NAND... Erasing at 0xc0000 -- 100% complete. Writing to NAND... OK Pogov4> boot Reset IDE: ide_preinit failed Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 3968000 ccacfed9-01 83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 538 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 4963680 bytes read in 1138 ms (4.2 MiB/s) loading uInitrd ... 9713936 bytes read in 1354 ms (6.8 MiB/s) loading DTB /boot/dts/kirkwood-pogoplug_v4.dtb ... 9962 bytes read in 1631 ms (5.9 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:31 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4963616 Bytes = 4.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:50 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 071c6000, end 07b098d0 ... OK Loading Device Tree to 071c0000, end 071c56e9 ... OK Using machid 0x831 from environment Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Pogoplug v4 [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000][ T0] Memory: 104836K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26236K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000013][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000073][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.001195][ T0] Console: colour dummy device 80x30 [ 0.001273][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.001312][ T0] pid_max: default: 32768 minimum: 301 [ 0.001871][ T0] LSM: Security Framework initializing [ 0.002155][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002199][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003510][ T0] *** VALIDATE proc *** [ 0.003912][ T0] *** VALIDATE cgroup1 *** [ 0.003949][ T0] *** VALIDATE cgroup2 *** [ 0.004100][ T0] CPU: Testing write buffer coherency: ok [ 0.006745][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.007190][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.007628][ T1] rcu: Hierarchical SRCU implementation. [ 0.012683][ T1] devtmpfs: initialized [ 0.020234][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020283][ T1] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.020658][ T1] xor: measuring software checksum speed [ 0.120175][ T1] arm4regs : 725.200 MB/sec [ 0.220115][ T1] 8regs : 435.600 MB/sec [ 0.320106][ T1] 32regs : 631.600 MB/sec [ 0.320133][ T1] xor: using function: arm4regs (725.200 MB/sec) [ 0.320164][ T1] prandom: seed boundary self test passed [ 0.326429][ T1] prandom: 100 self tests passed [ 0.326447][ T1] pinctrl core: initialized pinctrl subsystem [ 0.328628][ T1] NET: Registered protocol family 16 [ 0.329507][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.330857][ T1] audit: initializing netlink subsys (disabled) [ 0.332822][ T14] audit: type=2000 audit(0.330:1): state=initialized audit_enabled=0 res=1 [ 0.333012][ T1] cpuidle: using governor ladder [ 0.333129][ T1] cpuidle: using governor menu [ 0.333947][ T1] Feroceon L2: Enabling L2 [ 0.334020][ T1] Feroceon L2: Cache support initialised. [ 0.342444][ T1] No ATAGs? [ 2.560082][ C0] random: fast init done [ 9.236070][ T71] alg: No test for lzo-rle (lzo-rle-generic) [ 9.236555][ T73] alg: No test for lzo-rle (lzo-rle-scomp) [ 9.420718][ T1] raid6: int32x8 gen() 86 MB/s [ 9.590689][ T1] raid6: int32x8 xor() 58 MB/s [ 9.760760][ T1] raid6: int32x4 gen() 88 MB/s [ 9.930180][ T1] raid6: int32x4 xor() 57 MB/s [ 10.100220][ T1] raid6: int32x2 gen() 93 MB/s [ 10.270320][ T1] raid6: int32x2 xor() 66 MB/s [ 10.440566][ T1] raid6: int32x1 gen() 75 MB/s [ 10.610518][ T1] raid6: int32x1 xor() 50 MB/s [ 10.610534][ T1] raid6: using algorithm int32x2 gen() 93 MB/s [ 10.610547][ T1] raid6: .... xor() 66 MB/s, rmw enabled [ 10.610560][ T1] raid6: using intx1 recovery algorithm [ 10.610927][ T1] vgaarb: loaded [ 10.611670][ T1] SCSI subsystem initialized [ 10.612384][ T1] usbcore: registered new interface driver usbfs [ 10.612473][ T1] usbcore: registered new interface driver hub [ 10.612608][ T1] usbcore: registered new device driver usb [ 10.612865][ T1] pps_core: LinuxPPS API ver. 1 registered [ 10.612882][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 10.612920][ T1] PTP clock support registered [ 10.614814][ T1] clocksource: Switched to clocksource orion_clocksource [ 12.159800][ T1] VFS: Disk quotas dquot_6.6.0 [ 12.159937][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.173569][ T1] NET: Registered protocol family 2 [ 12.174781][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 12.174959][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 12.174997][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 12.175029][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 12.175182][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 12.175222][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 12.175555][ T1] NET: Registered protocol family 1 [ 12.176496][ T1] RPC: Registered named UNIX socket transport module. [ 12.176516][ T1] RPC: Registered udp transport module. [ 12.176529][ T1] RPC: Registered tcp transport module. [ 12.176541][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.176563][ T1] PCI: CLS 0 bytes, default 32 [ 12.176911][ T1] Trying to unpack rootfs image as initramfs... [ 13.421527][ T1] Freeing initrd memory: 9488K [ 13.421803][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 13.423560][ T1] Initialise system trusted keyrings [ 13.423636][ T1] Key type blacklist registered [ 13.423969][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 13.424123][ T1] zbud: loaded [ 13.425904][ T1] NFS: Registering the id_resolver key type [ 13.425953][ T1] Key type id_resolver registered [ 13.425967][ T1] Key type id_legacy registered [ 13.425997][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 13.426021][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 13.426438][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 13.426786][ T1] fuse: init (API version 7.31) [ 13.427353][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 13.427627][ T1] orangefs_init: module version upstream loaded [ 13.427647][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 13.452691][ T1] async_tx: api initialized (async) [ 13.452727][ T1] Key type asymmetric registered [ 13.452742][ T1] Asymmetric key parser 'x509' registered [ 13.452850][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 13.454287][ T1] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 47 [ 13.454315][ T1] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 49 [ 13.455019][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 13.457828][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 13.457864][ T1] pci_bus 0000:00: root bus resource [bus 00-ff] [ 13.457887][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 13.457907][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 13.458059][ T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 13.458120][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 13.459832][ T1] PCI: bus0: Fast back to back transfers disabled [ 13.459871][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 13.460141][ T1] pci 0000:01:00.0: [1b73:1009] type 00 class 0x0c0330 [ 13.460201][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] [ 13.460236][ T1] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 13.460269][ T1] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit] [ 13.460389][ T1] pci 0000:01:00.0: supports D1 [ 13.460410][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 13.460506][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 13.486241][ T1] PCI: bus1: Fast back to back transfers disabled [ 13.486283][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 13.486587][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 13.486614][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref] [ 13.486646][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 13.486681][ T1] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit] [ 13.486714][ T1] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit] [ 13.486745][ T1] pci 0000:00:01.0: PCI bridge to [bus 01] [ 13.486771][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 13.486933][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 13.487053][ T1] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 13.487864][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 13.546014][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 13.548975][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 13.606034][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 13.609396][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 13.611289][ T1] printk: console [ttyS0] disabled [ 13.611398][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 14.567965][ T1] printk: console [ttyS0] enabled [ 14.583883][ T1] loop: module loaded [ 14.588614][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 14.598201][ T1] scsi host0: sata_mv [ 14.602890][ T1] scsi host1: sata_mv [ 14.607257][ T1] ata1: SATA max UDMA/133 irq 32 [ 14.612037][ T1] ata2: SATA max UDMA/133 irq 32 [ 14.618448][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 14.625606][ T1] nand: Hynix H27U1G8F2BTR-BC [ 14.630130][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 14.638413][ T1] Scanning device for bad blocks [ 14.648046][ T1] Bad eraseblock 58 at 0x000000740000 [ 14.732722][ T1] 5 cmdlinepart partitions found on MTD device orion_nand [ 14.739684][ T1] Creating 5 MTD partitions on "orion_nand": [ 14.745538][ T1] 0x000000000000-0x000000200000 : "u-boot" [ 14.753105][ T1] 0x000000200000-0x000000500000 : "uImage" [ 14.760570][ T1] 0x000000500000-0x000000800000 : "uImage2" [ 14.768101][ T1] 0x000000800000-0x000001000000 : "failsafe" [ 14.775772][ T1] 0x000001000000-0x000008000000 : "root" [ 14.785328][ T1] libphy: Fixed MDIO Bus: probed [ 14.791259][ T1] libphy: orion_mdio_bus: probed [ 14.816702][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 14.825007][ T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 14.946572][ T112] ata1: SATA link down (SStatus 0 SControl F300) [ 15.286743][ T114] ata2: SATA link down (SStatus 0 SControl F300) [ 15.545785][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51 [ 15.555387][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.562618][ T1] ehci-pci: EHCI PCI platform driver [ 15.567859][ T1] ehci-orion: EHCI orion driver [ 15.572848][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 15.579085][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 15.587684][ T1] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 15.614871][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 15.621963][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 15.630933][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.638852][ T1] usb usb1: Product: EHCI Host Controller [ 15.644407][ T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd [ 15.651715][ T1] usb usb1: SerialNumber: f1050000.ehci [ 15.657975][ T1] hub 1-0:1.0: USB hub found [ 15.662462][ T1] hub 1-0:1.0: 1 port detected [ 15.668299][ T1] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 15.674233][ T1] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 15.683819][ T1] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 15.694397][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 15.703377][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.711298][ T1] usb usb2: Product: xHCI Host Controller [ 15.716879][ T1] usb usb2: Manufacturer: Linux 5.2.9-kirkwood-tld-1 xhci-hcd [ 15.724161][ T1] usb usb2: SerialNumber: 0000:01:00.0 [ 15.730261][ T1] hub 2-0:1.0: USB hub found [ 15.734757][ T1] hub 2-0:1.0: 2 ports detected [ 15.740274][ T1] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 15.746274][ T1] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 15.754358][ T1] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 15.761485][ T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 15.770484][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 [ 15.779592][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.787517][ T1] usb usb3: Product: xHCI Host Controller [ 15.793076][ T1] usb usb3: Manufacturer: Linux 5.2.9-kirkwood-tld-1 xhci-hcd [ 15.800385][ T1] usb usb3: SerialNumber: 0000:01:00.0 [ 15.806465][ T1] hub 3-0:1.0: USB hub found [ 15.810955][ T1] hub 3-0:1.0: 2 ports detected [ 15.816786][ T1] usbcore: registered new interface driver usb-storage [ 15.823956][ T1] mousedev: PS/2 mouse device common for all mice [ 16.034865][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 16.346313][ T15] usb 1-1: New USB device found, idVendor=0bda, idProduct=0307, bcdDevice= 1.20 [ 16.355214][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 16.363021][ T15] usb 1-1: Product: USB3.0 Card Reader [ 16.368348][ T15] usb 1-1: Manufacturer: Realtek [ 16.373143][ T15] usb 1-1: SerialNumber: 201006010301 [ 16.384366][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 16.391786][ T15] scsi host2: usb-storage 1-1:1.0 [ 16.884862][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 16.891181][ T1] i2c /dev entries driver [ 16.896347][ T1] device-mapper: uevent: version 1.0.3 [ 16.902029][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 16.911763][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 16.919057][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 16.926397][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 16.933776][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 16.940578][ T1] device-mapper: raid: Loading target version 1.14.0 [ 16.948691][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 16.955296][ T1] drop_monitor: Initializing network drop monitor service [ 16.962689][ T1] NET: Registered protocol family 17 [ 16.968204][ T1] Key type dns_resolver registered [ 16.974323][ T1] registered taskstats version 1 [ 16.979151][ T1] Loading compiled-in X.509 certificates [ 16.984727][ T1] zswap: loaded using pool lzo/zbud [ 17.122973][ T1] Key type big_key registered [ 17.188479][ T1] Key type encrypted registered [ 17.196175][ T1] hctosys: unable to open rtc device (rtc0) [ 17.206977][ T1] Freeing unused kernel memory: 1024K [ 17.215945][ T1] Checked W+X mappings: passed, no W+X pages found [ 17.222283][ T1] Run /init as init process Loading, please wait... Starting version 241 [ 17.463379][ T23] scsi 2:0:0:0: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 0 CCS [ 17.501378][ T23] scsi 2:0:0:1: Direct-Access Generic- USB3.0 CRW -MS 1.00 PQ: 0 ANSI: 0 CCS [ 18.178658][ T7] sd 2:0:0:0: [sda] 3970048 512-byte logical blocks: (2.03 GB/1.89 GiB) [ 18.192879][ T116] sd 2:0:0:1: [sdb] Attached SCSI removable disk [ 18.210279][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 18.231270][ T7] sd 2:0:0:0: [sda] No Caching mode page found [ 18.244976][ T7] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 18.279507][ T7] sda: sda1 [ 18.289520][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 19.153514][ T173] usbcore: registered new interface driver uas [ 19.177171][ T172] mvsdio f1090000.mvsdio: Got CD GPIO Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: recovering journal rootfs: clean, 15077/124160 files, 150191/496000 blocks done. [ 30.153896][ T193] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 30.266219][ T193] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.93 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Starting hotplug events dispatcher: systemd-udevd. [ ok ] Synthesizing the initial hotplug events (subsystems)...done. [ ok ] Synthesizing the initial hotplug events (devices)...done. [....] Waiting for /dev to be fully populated...[ 35.520118][ T373] systemd-udevd[373]: Using default interface naming scheme 'v240'. [ 35.603788][ T396] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 35.670698][ C0] random: crng init done [ 35.711998][ T373] systemd-udevd[373]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 36.388173][ T396] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ 36.509735][ T396] watchdog: f1020300.watchdog-timer: falling back to default timeout (25) [ 36.532794][ T395] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 36.586718][ T395] sd 2:0:0:1: Attached scsi generic sg1 type 0 [ 36.598239][ T375] marvell-cesa f1030000.crypto: CESA device successfully registered [ 36.625164][ T396] orion_wdt: Initial timeout 25 sec [ 36.809325][ T395] systemd-udevd[395]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. done. [ ok ] Setting hostname to 'debian'...done. [ ok ] Activating swap:. [ 38.602653][ T590] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [info] Will now check all file systems. fsck from util-linux 2.33.1 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable.. [ ok ] Cleaning up temporary files.... [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Starting Setting kernel variables: sysctl. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/52:3b:20:9c:11:51 Sending on LPF/eth0/52:3b:20:9c:11:51 Sending on Socket/fallback DHCPREQUEST for 192.168.0.15 on eth0 to 255.255.255.255 port 67 [ 47.641100][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled DHCPREQUEST for 192.168.0.15 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPOFFER of 192.168.1.87 from 192.168.1.1 DHCPREQUEST for 192.168.1.87 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPREQUEST for 192.168.1.87 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPOFFER of 192.168.1.87 from 192.168.1.1 DHCPREQUEST for 192.168.1.87 on eth0 to 255.255.255.255 port 67
Quote
Warning: egiga0 MAC addresses don't match:
Address in SROM is 52:3b:20:9c:11:51
Address in environment is 00:25:31:05:f9:62
Re: Help with booting Pogo V4 September 30, 2020 05:18AM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
Warning: egiga0 MAC addresses don't match:
> Address in SROM is 52:3b:20:9c:11:51
> Address in environment is
> 00:25:31:05:f9:62
Quote
https://forum.doozan.com/read.php?3,12381
e.2 Box specific envs:
Then for all boxes, restore these 2 envs using the saved envs text in step c (replace xxx with the real saved values)
fw_setenv mtdparts 'xxxxxxxxx'
fw_setenv ethaddr 'xx:xx:xx:xx:xx:xx'
setenv dtb_file '/boot/dts/kirkwood-pogoplug_v4.dtb' setenv mtdparts 'mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)' setenv ethaddr '00:25:31:05:f9:62'
boot
Re: Help with booting Pogo V4 October 01, 2020 12:14AM |
Registered: 10 years ago Posts: 12 |
# kwboot -t /dev/ttyUSB0 -b uboot.2017.07-tld-1.pogo_v4.mtd0.kwb -p pogoV4_basic.patch Sending boot message. Please reboot the target...| Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [......................................................................] 5 % [......................................................................] 6 % [......................................................................] 8 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 13 % [......................................................................] 15 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 20 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 25 % [......................................................................] 27 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 32 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 37 % [......................................................................] 39 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 44 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 49 % [......................................................................] 51 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 56 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 61 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 66 % [......................................................................] 68 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 73 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 78 % [......................................................................] 80 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 85 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 90 % [......................................................................] 92 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 97 % [......................................................................] 99 % [....................................] [Type Ctrl-\ + c to quit] U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 Pogov4> setenv arcNumber 3960 Pogov4> setenv machid f78 Pogov4> setenv mtdparts '00253105F962' Pogov4> setenv ethaddr '00:25:31:05:f9:62' Pogov4> setenv dtb_file '/boot/dts/kirkwood-pogoplug_v4.dtb' Pogov4> setenv mtdparts 'mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)' Pogov4> saveenv Saving Environment to NAND... Erasing NAND... Erasing at 0xc0000 -- 100% complete. Writing to NAND... OK Pogov4> boot starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) Use USB retry period from the environment: 15 second(s) Device NOT ready Request Sense returned 02 3A 00 1 Storage Device(s) found Reset IDE: ide_preinit failed Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 3968000 ccacfed9-01 83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 538 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 4963680 bytes read in 1137 ms (4.2 MiB/s) loading uInitrd ... 9713936 bytes read in 1354 ms (6.8 MiB/s) loading DTB /boot/dts/kirkwood-pogoplug_v4.dtb ... 9962 bytes read in 1630 ms (5.9 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:31 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4963616 Bytes = 4.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:50 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 071c6000, end 07b098d0 ... OK Loading Device Tree to 071c0000, end 071c56e9 ... OK Using machid 0xf78 from environment Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Pogoplug v4 [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000][ T0] Memory: 104836K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26236K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000013][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000073][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.001196][ T0] Console: colour dummy device 80x30 [ 0.001274][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.001313][ T0] pid_max: default: 32768 minimum: 301 [ 0.001872][ T0] LSM: Security Framework initializing [ 0.002156][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002199][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003510][ T0] *** VALIDATE proc *** [ 0.003912][ T0] *** VALIDATE cgroup1 *** [ 0.003949][ T0] *** VALIDATE cgroup2 *** [ 0.004101][ T0] CPU: Testing write buffer coherency: ok [ 0.006746][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.007191][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.007628][ T1] rcu: Hierarchical SRCU implementation. [ 0.012684][ T1] devtmpfs: initialized [ 0.020227][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020277][ T1] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.020655][ T1] xor: measuring software checksum speed [ 0.120174][ T1] arm4regs : 725.200 MB/sec [ 0.220116][ T1] 8regs : 435.600 MB/sec [ 0.320109][ T1] 32regs : 633.200 MB/sec [ 0.320138][ T1] xor: using function: arm4regs (725.200 MB/sec) [ 0.320170][ T1] prandom: seed boundary self test passed [ 0.326432][ T1] prandom: 100 self tests passed [ 0.326449][ T1] pinctrl core: initialized pinctrl subsystem [ 0.328628][ T1] NET: Registered protocol family 16 [ 0.329507][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.330851][ T1] audit: initializing netlink subsys (disabled) [ 0.332807][ T14] audit: type=2000 audit(0.330:1): state=initialized audit_enabled=0 res=1 [ 0.332996][ T1] cpuidle: using governor ladder [ 0.333116][ T1] cpuidle: using governor menu [ 0.333930][ T1] Feroceon L2: Enabling L2 [ 0.334003][ T1] Feroceon L2: Cache support initialised. [ 0.342415][ T1] No ATAGs? [ 2.560083][ C0] random: fast init done [ 9.236182][ T71] alg: No test for lzo-rle (lzo-rle-generic) [ 9.236665][ T73] alg: No test for lzo-rle (lzo-rle-scomp) [ 9.420714][ T1] raid6: int32x8 gen() 86 MB/s [ 9.590690][ T1] raid6: int32x8 xor() 58 MB/s [ 9.760547][ T1] raid6: int32x4 gen() 88 MB/s [ 9.930178][ T1] raid6: int32x4 xor() 57 MB/s [ 10.100217][ T1] raid6: int32x2 gen() 93 MB/s [ 10.270321][ T1] raid6: int32x2 xor() 66 MB/s [ 10.440566][ T1] raid6: int32x1 gen() 75 MB/s [ 10.610519][ T1] raid6: int32x1 xor() 50 MB/s [ 10.610536][ T1] raid6: using algorithm int32x2 gen() 93 MB/s [ 10.610548][ T1] raid6: .... xor() 66 MB/s, rmw enabled [ 10.610561][ T1] raid6: using intx1 recovery algorithm [ 10.610929][ T1] vgaarb: loaded [ 10.611675][ T1] SCSI subsystem initialized [ 10.612389][ T1] usbcore: registered new interface driver usbfs [ 10.612479][ T1] usbcore: registered new interface driver hub [ 10.612616][ T1] usbcore: registered new device driver usb [ 10.612874][ T1] pps_core: LinuxPPS API ver. 1 registered [ 10.612890][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 10.612929][ T1] PTP clock support registered [ 10.614814][ T1] clocksource: Switched to clocksource orion_clocksource [ 12.159994][ T1] VFS: Disk quotas dquot_6.6.0 [ 12.160131][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.173783][ T1] NET: Registered protocol family 2 [ 12.175068][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 12.175122][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 12.175157][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 12.175189][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 12.175336][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 12.175375][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 12.175705][ T1] NET: Registered protocol family 1 [ 12.176656][ T1] RPC: Registered named UNIX socket transport module. [ 12.176676][ T1] RPC: Registered udp transport module. [ 12.176689][ T1] RPC: Registered tcp transport module. [ 12.176701][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.176723][ T1] PCI: CLS 0 bytes, default 32 [ 12.177069][ T1] Trying to unpack rootfs image as initramfs... [ 13.421597][ T1] Freeing initrd memory: 9488K [ 13.421875][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 13.423637][ T1] Initialise system trusted keyrings [ 13.423729][ T1] Key type blacklist registered [ 13.424064][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 13.424218][ T1] zbud: loaded [ 13.426004][ T1] NFS: Registering the id_resolver key type [ 13.426052][ T1] Key type id_resolver registered [ 13.426066][ T1] Key type id_legacy registered [ 13.426095][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 13.426120][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 13.426538][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 13.426885][ T1] fuse: init (API version 7.31) [ 13.427453][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 13.427726][ T1] orangefs_init: module version upstream loaded [ 13.427744][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 13.452684][ T1] async_tx: api initialized (async) [ 13.452720][ T1] Key type asymmetric registered [ 13.452734][ T1] Asymmetric key parser 'x509' registered [ 13.452841][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 13.454282][ T1] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 47 [ 13.454310][ T1] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 49 [ 13.455017][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 13.457839][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 13.457873][ T1] pci_bus 0000:00: root bus resource [bus 00-ff] [ 13.457897][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 13.457918][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 13.458066][ T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 13.458127][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 13.459838][ T1] PCI: bus0: Fast back to back transfers disabled [ 13.459878][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 13.460151][ T1] pci 0000:01:00.0: [1b73:1009] type 00 class 0x0c0330 [ 13.460210][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] [ 13.460245][ T1] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 13.460278][ T1] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit] [ 13.460398][ T1] pci 0000:01:00.0: supports D1 [ 13.460420][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 13.460514][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 13.486240][ T1] PCI: bus1: Fast back to back transfers disabled [ 13.486282][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 13.486586][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 13.486614][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref] [ 13.486644][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 13.486680][ T1] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit] [ 13.486713][ T1] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit] [ 13.486743][ T1] pci 0000:00:01.0: PCI bridge to [bus 01] [ 13.486771][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 13.486936][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 13.487054][ T1] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 13.487864][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 13.546009][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 13.548974][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 13.606047][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 13.609414][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 13.611307][ T1] printk: console [ttyS0] disabled [ 13.611415][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 14.568002][ T1] printk: console [ttyS0] enabled [ 14.583944][ T1] loop: module loaded [ 14.588680][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 14.598272][ T1] scsi host0: sata_mv [ 14.602960][ T1] scsi host1: sata_mv [ 14.607330][ T1] ata1: SATA max UDMA/133 irq 32 [ 14.612107][ T1] ata2: SATA max UDMA/133 irq 32 [ 14.618523][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 14.625678][ T1] nand: Hynix H27U1G8F2BTR-BC [ 14.630201][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 14.638485][ T1] Scanning device for bad blocks [ 14.648096][ T1] Bad eraseblock 58 at 0x000000740000 [ 14.732761][ T1] 5 cmdlinepart partitions found on MTD device orion_nand [ 14.739728][ T1] Creating 5 MTD partitions on "orion_nand": [ 14.745582][ T1] 0x000000000000-0x000000200000 : "u-boot" [ 14.753154][ T1] 0x000000200000-0x000000500000 : "uImage" [ 14.760620][ T1] 0x000000500000-0x000000800000 : "uImage2" [ 14.768141][ T1] 0x000000800000-0x000001000000 : "failsafe" [ 14.775803][ T1] 0x000001000000-0x000008000000 : "root" [ 14.785378][ T1] libphy: Fixed MDIO Bus: probed [ 14.791314][ T1] libphy: orion_mdio_bus: probed [ 14.816779][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 14.825093][ T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 14.946574][ T112] ata1: SATA link down (SStatus 0 SControl F300) [ 15.286735][ T114] ata2: SATA link down (SStatus 0 SControl F300) [ 15.545763][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:f9:62 [ 15.555366][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.562604][ T1] ehci-pci: EHCI PCI platform driver [ 15.567841][ T1] ehci-orion: EHCI orion driver [ 15.572822][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 15.579058][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 15.587658][ T1] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 15.614868][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 15.621956][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 15.630927][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.638844][ T1] usb usb1: Product: EHCI Host Controller [ 15.644399][ T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd [ 15.651709][ T1] usb usb1: SerialNumber: f1050000.ehci [ 15.657966][ T1] hub 1-0:1.0: USB hub found [ 15.662455][ T1] hub 1-0:1.0: 1 port detected [ 15.668288][ T1] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 15.674216][ T1] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 15.683806][ T1] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 15.694391][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 15.703367][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.711283][ T1] usb usb2: Product: xHCI Host Controller [ 15.716863][ T1] usb usb2: Manufacturer: Linux 5.2.9-kirkwood-tld-1 xhci-hcd [ 15.724146][ T1] usb usb2: SerialNumber: 0000:01:00.0 [ 15.730243][ T1] hub 2-0:1.0: USB hub found [ 15.734732][ T1] hub 2-0:1.0: 2 ports detected [ 15.740248][ T1] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 15.746253][ T1] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 15.754334][ T1] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 15.761459][ T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 15.770458][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 [ 15.779569][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.787492][ T1] usb usb3: Product: xHCI Host Controller [ 15.793050][ T1] usb usb3: Manufacturer: Linux 5.2.9-kirkwood-tld-1 xhci-hcd [ 15.800361][ T1] usb usb3: SerialNumber: 0000:01:00.0 [ 15.806447][ T1] hub 3-0:1.0: USB hub found [ 15.810939][ T1] hub 3-0:1.0: 2 ports detected [ 15.816767][ T1] usbcore: registered new interface driver usb-storage [ 15.823940][ T1] mousedev: PS/2 mouse device common for all mice [ 16.034864][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 16.346663][ T15] usb 1-1: New USB device found, idVendor=0bda, idProduct=0307, bcdDevice= 1.20 [ 16.355562][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 16.363367][ T15] usb 1-1: Product: USB3.0 Card Reader [ 16.368694][ T15] usb 1-1: Manufacturer: Realtek [ 16.373490][ T15] usb 1-1: SerialNumber: 201006010301 [ 16.384715][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 16.392131][ T15] scsi host2: usb-storage 1-1:1.0 [ 16.884862][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 16.891184][ T1] i2c /dev entries driver [ 16.896352][ T1] device-mapper: uevent: version 1.0.3 [ 16.902040][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 16.911769][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 16.919066][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 16.926408][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 16.933787][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 16.940590][ T1] device-mapper: raid: Loading target version 1.14.0 [ 16.948701][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 16.955300][ T1] drop_monitor: Initializing network drop monitor service [ 16.962693][ T1] NET: Registered protocol family 17 [ 16.968216][ T1] Key type dns_resolver registered [ 16.974342][ T1] registered taskstats version 1 [ 16.979175][ T1] Loading compiled-in X.509 certificates [ 16.984745][ T1] zswap: loaded using pool lzo/zbud [ 17.122900][ T1] Key type big_key registered [ 17.188473][ T1] Key type encrypted registered [ 17.196187][ T1] hctosys: unable to open rtc device (rtc0) [ 17.206985][ T1] Freeing unused kernel memory: 1024K [ 17.215947][ T1] Checked W+X mappings: passed, no W+X pages found [ 17.222285][ T1] Run /init as init process Loading, please wait... Starting version 241 [ 17.463349][ T23] scsi 2:0:0:0: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 0 CCS [ 17.501473][ T23] scsi 2:0:0:1: Direct-Access Generic- USB3.0 CRW -MS 1.00 PQ: 0 ANSI: 0 CCS [ 18.178639][ T7] sd 2:0:0:0: [sda] 3970048 512-byte logical blocks: (2.03 GB/1.89 GiB) [ 18.192607][ T116] sd 2:0:0:1: [sdb] Attached SCSI removable disk [ 18.210377][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 18.230371][ T7] sd 2:0:0:0: [sda] No Caching mode page found [ 18.246094][ T7] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 18.279232][ T7] sda: sda1 [ 18.290616][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 19.169850][ T174] usbcore: registered new interface driver uas [ 19.198464][ T173] mvsdio f1090000.mvsdio: Got CD GPIO Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: recovering journal rootfs: clean, 15077/124160 files, 150191/496000 blocks done. [ 30.168122][ T193] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 30.280805][ T193] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.93 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Starting hotplug events dispatcher: systemd-udevd. [ ok ] Synthesizing the initial hotplug events (subsystems)...done. [ ok ] Synthesizing the initial hotplug events (devices)...done. [....] Waiting for /dev to be fully populated...[ 35.556482][ T392] systemd-udevd[392]: Using default interface naming scheme 'v240'. [ 35.662991][ T372] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 35.686170][ C0] random: crng init done [ 35.783290][ T392] systemd-udevd[392]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 36.360277][ T373] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ 36.472170][ T395] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 36.484966][ T373] watchdog: f1020300.watchdog-timer: falling back to default timeout (25) [ 36.535410][ T395] sd 2:0:0:1: Attached scsi generic sg1 type 0 [ 36.585216][ T373] orion_wdt: Initial timeout 25 sec [ 36.686894][ T372] marvell-cesa f1030000.crypto: CESA device successfully registered [ 36.815060][ T376] systemd-udevd[376]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. done. [ ok ] Setting hostname to 'debian'...done. [ ok ] Activating swap:. [ 38.617886][ T590] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [info] Will now check all file systems. fsck from util-linux 2.33.1 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable.. [ ok ] Cleaning up temporary files.... [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Starting Setting kernel variables: sysctl. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:05:f9:62 Sending on LPF/eth0/00:25:31:05:f9:62 Sending on Socket/fallback DHCPREQUEST for 192.168.0.15 on eth0 to 255.255.255.255 port 67 [ 47.646714][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled DHCPREQUEST for 192.168.0.15 on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.1.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPOFFER of 192.168.1.3 from 192.168.1.1 DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.3 from 192.168.1.1 bound to 192.168.1.3 -- renewal in 266474 seconds. [ 51.645434][ T1134] NET: Registered protocol family 10 [ 51.656093][ T1134] Segment Routing with IPv6 done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1329 (syslogd) . ok [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1356 (klogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting NFS common utilities: statd idmapd. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting NTP server: ntpd. [ ok ] Starting OpenBSD Secure Shell server: sshd. [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 10 debian ttyS0 debian login: root Password: Last login: Wed Dec 31 16:02:34 PST 1969 from 192.168.0.100 on pts/0 Linux debian 5.2.9-kirkwood-tld-1 #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~#
Re: Help with booting Pogo V4 October 01, 2020 02:16AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Help with booting Pogo V4 October 01, 2020 02:52AM |
Registered: 10 years ago Posts: 12 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) Use USB retry period from the environment: 15 second(s) Device NOT ready Request Sense returned 02 3A 00 1 Storage Device(s) found Reset IDE: ide_preinit failed Card did not respond to voltage select! mmc_init: -95, time 14 Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 3968000 ccacfed9-01 83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available Card did not respond to voltage select! mmc_init: -95, time 14 running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 538 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 4963680 bytes read in 1137 ms (4.2 MiB/s) loading uInitrd ... 9713936 bytes read in 1354 ms (6.8 MiB/s) loading DTB /boot/dts/kirkwood-pogoplug_v4.dtb ... 9962 bytes read in 1630 ms (5.9 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:31 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4963616 Bytes = 4.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:50 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 071c6000, end 07b098d0 ... OK Loading Device Tree to 071c0000, end 071c56e9 ... OK Using machid 0xf78 from environment Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Pogoplug v4 [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 00253105F962 [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000][ T0] Memory: 104836K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26236K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000012][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000072][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.001202][ T0] Console: colour dummy device 80x30 [ 0.001280][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.001319][ T0] pid_max: default: 32768 minimum: 301 [ 0.001880][ T0] LSM: Security Framework initializing [ 0.002162][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002203][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003514][ T0] *** VALIDATE proc *** [ 0.003906][ T0] *** VALIDATE cgroup1 *** [ 0.003944][ T0] *** VALIDATE cgroup2 *** [ 0.004096][ T0] CPU: Testing write buffer coherency: ok [ 0.006745][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.007191][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.007631][ T1] rcu: Hierarchical SRCU implementation. [ 0.012691][ T1] devtmpfs: initialized [ 0.020248][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020296][ T1] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.020679][ T1] xor: measuring software checksum speed [ 0.120175][ T1] arm4regs : 724.400 MB/sec [ 0.220113][ T1] 8regs : 435.600 MB/sec [ 0.320109][ T1] 32regs : 633.200 MB/sec [ 0.320137][ T1] xor: using function: arm4regs (724.400 MB/sec) [ 0.320169][ T1] prandom: seed boundary self test passed [ 0.326433][ T1] prandom: 100 self tests passed [ 0.326451][ T1] pinctrl core: initialized pinctrl subsystem [ 0.328633][ T1] NET: Registered protocol family 16 [ 0.329516][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.330856][ T1] audit: initializing netlink subsys (disabled) [ 0.332819][ T14] audit: type=2000 audit(0.330:1): state=initialized audit_enabled=0 res=1 [ 0.333006][ T1] cpuidle: using governor ladder [ 0.333126][ T1] cpuidle: using governor menu [ 0.333950][ T1] Feroceon L2: Enabling L2 [ 0.334022][ T1] Feroceon L2: Cache support initialised. [ 0.342442][ T1] No ATAGs? [ 2.560081][ C0] random: fast init done [ 9.236264][ T71] alg: No test for lzo-rle (lzo-rle-generic) [ 9.236749][ T73] alg: No test for lzo-rle (lzo-rle-scomp) [ 9.420699][ T1] raid6: int32x8 gen() 86 MB/s [ 9.590694][ T1] raid6: int32x8 xor() 58 MB/s [ 9.760494][ T1] raid6: int32x4 gen() 88 MB/s [ 9.930183][ T1] raid6: int32x4 xor() 57 MB/s [ 10.100546][ T1] raid6: int32x2 gen() 93 MB/s [ 10.270320][ T1] raid6: int32x2 xor() 66 MB/s [ 10.440564][ T1] raid6: int32x1 gen() 75 MB/s [ 10.610518][ T1] raid6: int32x1 xor() 50 MB/s [ 10.610534][ T1] raid6: using algorithm int32x2 gen() 93 MB/s [ 10.610547][ T1] raid6: .... xor() 66 MB/s, rmw enabled [ 10.610559][ T1] raid6: using intx1 recovery algorithm [ 10.610927][ T1] vgaarb: loaded [ 10.611676][ T1] SCSI subsystem initialized [ 10.612395][ T1] usbcore: registered new interface driver usbfs [ 10.612484][ T1] usbcore: registered new interface driver hub [ 10.612621][ T1] usbcore: registered new device driver usb [ 10.612881][ T1] pps_core: LinuxPPS API ver. 1 registered [ 10.612897][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 10.612936][ T1] PTP clock support registered [ 10.614841][ T1] clocksource: Switched to clocksource orion_clocksource [ 12.159936][ T1] VFS: Disk quotas dquot_6.6.0 [ 12.160071][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.173703][ T1] NET: Registered protocol family 2 [ 12.174986][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 12.175039][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 12.175074][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 12.175105][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 12.175253][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 12.175293][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 12.175620][ T1] NET: Registered protocol family 1 [ 12.176563][ T1] RPC: Registered named UNIX socket transport module. [ 12.176582][ T1] RPC: Registered udp transport module. [ 12.176595][ T1] RPC: Registered tcp transport module. [ 12.176607][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.176629][ T1] PCI: CLS 0 bytes, default 32 [ 12.176981][ T1] Trying to unpack rootfs image as initramfs... [ 13.421949][ T1] Freeing initrd memory: 9488K [ 13.422235][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 13.423991][ T1] Initialise system trusted keyrings [ 13.424071][ T1] Key type blacklist registered [ 13.424404][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 13.424558][ T1] zbud: loaded [ 13.426340][ T1] NFS: Registering the id_resolver key type [ 13.426385][ T1] Key type id_resolver registered [ 13.426400][ T1] Key type id_legacy registered [ 13.426429][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 13.426454][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 13.426872][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 13.427223][ T1] fuse: init (API version 7.31) [ 13.427795][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 13.428068][ T1] orangefs_init: module version upstream loaded [ 13.428087][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 13.453073][ T1] async_tx: api initialized (async) [ 13.453109][ T1] Key type asymmetric registered [ 13.453124][ T1] Asymmetric key parser 'x509' registered [ 13.453231][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 13.454670][ T1] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 47 [ 13.454699][ T1] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 49 [ 13.455404][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 13.458225][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 13.458260][ T1] pci_bus 0000:00: root bus resource [bus 00-ff] [ 13.458283][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 13.458304][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 13.458453][ T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 13.458513][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 13.460223][ T1] PCI: bus0: Fast back to back transfers disabled [ 13.460262][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 13.460534][ T1] pci 0000:01:00.0: [1b73:1009] type 00 class 0x0c0330 [ 13.460594][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] [ 13.460629][ T1] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 13.460662][ T1] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit] [ 13.460782][ T1] pci 0000:01:00.0: supports D1 [ 13.460804][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 13.460899][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 13.486271][ T1] PCI: bus1: Fast back to back transfers disabled [ 13.486312][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 13.486615][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 13.486643][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref] [ 13.486674][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 13.486710][ T1] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit] [ 13.486742][ T1] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit] [ 13.486773][ T1] pci 0000:00:01.0: PCI bridge to [bus 01] [ 13.486801][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 13.486966][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 13.487083][ T1] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 13.487891][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 13.546047][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 13.549008][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 13.606056][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 13.609424][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 13.611319][ T1] printk: console [ttyS0] disabled [ 13.611428][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 14.562454][ T1] printk: console [ttyS0] enabled [ 14.578460][ T1] loop: module loaded [ 14.583122][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 14.592713][ T1] scsi host0: sata_mv [ 14.597471][ T1] scsi host1: sata_mv [ 14.601741][ T1] ata1: SATA max UDMA/133 irq 32 [ 14.606597][ T1] ata2: SATA max UDMA/133 irq 32 [ 14.612962][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 14.620122][ T1] nand: Hynix H27U1G8F2BTR-BC [ 14.624646][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 14.632929][ T1] Scanning device for bad blocks [ 14.642557][ T1] Bad eraseblock 58 at 0x000000740000 [ 14.727276][ T1] 5 fixed-partitions partitions found on MTD device orion_nand [ 14.734648][ T1] Creating 5 MTD partitions on "orion_nand": [ 14.740500][ T1] 0x000000000000-0x000000200000 : "u-boot" [ 14.748120][ T1] 0x000000200000-0x000000500000 : "uImage" [ 14.755600][ T1] 0x000000500000-0x000000800000 : "uImage2" [ 14.763090][ T1] 0x000000800000-0x000001000000 : "failsafe" [ 14.770789][ T1] 0x000001000000-0x000008000000 : "root" [ 14.780358][ T1] libphy: Fixed MDIO Bus: probed [ 14.786351][ T1] libphy: orion_mdio_bus: probed [ 14.811721][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 14.820043][ T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 14.938572][ T112] ata1: SATA link down (SStatus 0 SControl F300) [ 15.286766][ T114] ata2: SATA link down (SStatus 0 SControl F300) [ 15.545798][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:f9:62 [ 15.555410][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.562647][ T1] ehci-pci: EHCI PCI platform driver [ 15.567902][ T1] ehci-orion: EHCI orion driver [ 15.572872][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 15.579112][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 15.587707][ T1] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 15.614897][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 15.621990][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 15.630961][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.638880][ T1] usb usb1: Product: EHCI Host Controller [ 15.644434][ T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd [ 15.651743][ T1] usb usb1: SerialNumber: f1050000.ehci [ 15.658005][ T1] hub 1-0:1.0: USB hub found [ 15.662492][ T1] hub 1-0:1.0: 1 port detected [ 15.668330][ T1] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 15.674260][ T1] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 15.683848][ T1] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 15.694422][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 15.703392][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.711309][ T1] usb usb2: Product: xHCI Host Controller [ 15.716889][ T1] usb usb2: Manufacturer: Linux 5.2.9-kirkwood-tld-1 xhci-hcd [ 15.724173][ T1] usb usb2: SerialNumber: 0000:01:00.0 [ 15.730282][ T1] hub 2-0:1.0: USB hub found [ 15.734774][ T1] hub 2-0:1.0: 2 ports detected [ 15.740293][ T1] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 15.746295][ T1] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 15.754377][ T1] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 15.761500][ T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 15.770498][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 [ 15.779602][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.787527][ T1] usb usb3: Product: xHCI Host Controller [ 15.793085][ T1] usb usb3: Manufacturer: Linux 5.2.9-kirkwood-tld-1 xhci-hcd [ 15.800396][ T1] usb usb3: SerialNumber: 0000:01:00.0 [ 15.806486][ T1] hub 3-0:1.0: USB hub found [ 15.810983][ T1] hub 3-0:1.0: 2 ports detected [ 15.816808][ T1] usbcore: registered new interface driver usb-storage [ 15.823975][ T1] mousedev: PS/2 mouse device common for all mice [ 16.034892][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 16.346462][ T15] usb 1-1: New USB device found, idVendor=0bda, idProduct=0307, bcdDevice= 1.20 [ 16.355362][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 16.363169][ T15] usb 1-1: Product: USB3.0 Card Reader [ 16.368496][ T15] usb 1-1: Manufacturer: Realtek [ 16.373292][ T15] usb 1-1: SerialNumber: 201006010301 [ 16.384514][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 16.391927][ T15] scsi host2: usb-storage 1-1:1.0 [ 16.884888][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 16.891207][ T1] i2c /dev entries driver [ 16.896361][ T1] device-mapper: uevent: version 1.0.3 [ 16.902051][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 16.911784][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 16.919086][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 16.926433][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 16.933813][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 16.940613][ T1] device-mapper: raid: Loading target version 1.14.0 [ 16.948711][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 16.955307][ T1] drop_monitor: Initializing network drop monitor service [ 16.962700][ T1] NET: Registered protocol family 17 [ 16.968224][ T1] Key type dns_resolver registered [ 16.974354][ T1] registered taskstats version 1 [ 16.979180][ T1] Loading compiled-in X.509 certificates [ 16.984752][ T1] zswap: loaded using pool lzo/zbud [ 17.123082][ T1] Key type big_key registered [ 17.188510][ T1] Key type encrypted registered [ 17.196207][ T1] hctosys: unable to open rtc device (rtc0) [ 17.207010][ T1] Freeing unused kernel memory: 1024K [ 17.215969][ T1] Checked W+X mappings: passed, no W+X pages found [ 17.222303][ T1] Run /init as init process Loading, please wait... Starting version 241 [ 17.463522][ T23] scsi 2:0:0:0: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 0 CCS [ 17.501649][ T23] scsi 2:0:0:1: Direct-Access Generic- USB3.0 CRW -MS 1.00 PQ: 0 ANSI: 0 CCS [ 18.178809][ T7] sd 2:0:0:0: [sda] 3970048 512-byte logical blocks: (2.03 GB/1.89 GiB) [ 18.192782][ T116] sd 2:0:0:1: [sdb] Attached SCSI removable disk [ 18.203665][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 18.222167][ T7] sd 2:0:0:0: [sda] No Caching mode page found [ 18.241174][ T7] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 18.272894][ T7] sda: sda1 [ 18.290787][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 19.152698][ T170] usbcore: registered new interface driver uas [ 19.182795][ T173] mvsdio f1090000.mvsdio: Got CD GPIO Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: recovering journal rootfs: clean, 15118/124160 files, 165469/496000 blocks done. [ 30.489175][ T193] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 30.602007][ T193] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.93 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Starting hotplug events dispatcher: systemd-udevd. [ ok ] Synthesizing the initial hotplug events (subsystems)...done. [ 35.694998][ C0] random: crng init dones (devices)... [ ok done. [....] Waiting for /dev to be fully populated...[ 35.858729][ T372] systemd-udevd[372]: Using default interface naming scheme 'v240'. [ 35.925439][ T394] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 36.050669][ T372] systemd-udevd[372]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 36.716674][ T412] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ 36.799454][ T373] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 36.826253][ T412] watchdog: f1020300.watchdog-timer: falling back to default timeout (25) [ 36.875402][ T373] sd 2:0:0:1: Attached scsi generic sg1 type 0 [ 36.950333][ T412] orion_wdt: Initial timeout 25 sec [ 36.975858][ T376] marvell-cesa f1030000.crypto: CESA device successfully registered [ 37.105549][ T374] systemd-udevd[374]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. done. [ ok ] Setting hostname to 'debian'...done. [ ok ] Activating swap:. [ 38.890186][ T590] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [info] Will now check all file systems. fsck from util-linux 2.33.1 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable.. [ ok ] Cleaning up temporary files.... [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Starting Setting kernel variables: sysctl. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:05:f9:62 Sending on LPF/eth0/00:25:31:05:f9:62 Sending on Socket/fallback DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 [ 48.056887][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled DHCPREQUEST for 192.168.1.3 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.3 from 192.168.1.1 bound to 192.168.1.3 -- renewal in 263502 seconds. [ 52.342346][ T1126] NET: Registered protocol family 10 [ 52.350376][ T1126] Segment Routing with IPv6 done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1338 (syslogd) . ok [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1365 (klogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting NFS common utilities: statd idmapd. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting NTP server: ntpd. [ ok ] Starting OpenBSD Secure Shell server: sshd. [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 10 debian ttyS0 debian login:
Re: Help with booting Pogo V4 October 01, 2020 03:56AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Help with booting Pogo V4 October 01, 2020 04:05AM |
Registered: 10 years ago Posts: 12 |
Re: Help with booting Pogo V4 October 01, 2020 04:22AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Help with booting Pogo V4 October 01, 2020 11:52AM |
Registered: 10 years ago Posts: 12 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Reset IDE: ide_preinit failed ** First descriptor is NOT a primary desc on 0:1 ** MMC rescan: current device # 0 initialized OK ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** Bad device usb 0 ** no IDE devices available ## Unknown partition table type 0 loading envs from mmc 0 ... ** No partition table - mmc 0 ** running scan_disk ... Scan device usb device usb 0:1 ** Bad device usb 0 ** device usb 1:1 ** Bad device usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device ide Reset IDE: ide_preinit failed device ide 0:1 ** Bad device ide 0 ** device ide 1:1 ** Bad device ide 1 ** device ide 2:1 ** Bad device ide 2 ** device ide 3:1 ** Bad device ide 3 ** Scan device mmc MMC rescan: current device # 0 initialized OK device mmc 0:1 ** ext4fs_devread read error - block Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** device mmc 1:1 MMC Device 1 not found MMC Device 1 not found ** Bad device mmc 1 ** device mmc 2:1 MMC Device 2 not found MMC Device 2 not found ** Bad device mmc 2 ** device mmc 3:1 MMC Device 3 not found MMC Device 3 not found ** Bad device mmc 3 ** loading uImage ... ** Bad device usb 0 ** loading uInitrd ... ** Bad device usb 0 ** loading DTB /boot/dts/kirkwood-pogoplug_v4.dtb ... ** Bad device usb 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! Pogov4>
Pogov4> printenv arcNumber=3960 bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 00253105F962 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-pogoplug_v4.dtb ethact=egiga0 ethaddr=00:25:31:05:F9:62 if_netconsole=ping $serverip init_ide=ide reset init_mmc=mmc rescan init_usb=usb start ipaddr=192.168.0.231 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 machid=f78 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=00253105F962 partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done scan_ide=ide reset scan_mmc=mmc rescan scan_usb=usb start serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_loaded=0 uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 3032/131068 bytes Pogov4>
Re: Help with booting Pogo V4 October 01, 2020 04:36PM |
Admin Registered: 13 years ago Posts: 18,821 |
MMC rescan: current device # 0 initialized OK device mmc 0:1 ** ext4fs_devread read error - block Failed to mount ext2 filesystem... ** Unrecognized filesystem type **
Re: Help with booting Pogo V4 January 02, 2024 01:54PM |
Registered: 10 years ago Posts: 12 |
bootdev=mmc devices=mmc usb sata
Re: Help with booting Pogo V4 January 02, 2024 09:12PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Help with booting Pogo V4 January 03, 2024 11:10PM |
Registered: 10 years ago Posts: 12 |
GNU Parted 3.5 Using /dev/mmcblk0 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: SD SD64G (sd/mmc) Disk /dev/mmcblk0: 62.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 18.7GB 18.7GB primary ext4 2 18.7GB 62.2GB 43.6GB primary ext4
cd /media/sdb1/boot cp -a zImage-6.5.7-kirkwood-tld-1 zImage.fdt cat dts/kirkwood-goflexnet.dtb >> zImage.fdt mv uImage uImage.orig mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-6.5.7-kirkwood-tld-1 -d zImage.fdt uImage sync
U-Boot 2023.04-tld-1 (Jun 11 2023 - 16:24:44 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 Model: Cloud Engines PogoPlug Series 4 DRAM: 128 MiB Core: 20 devices, 16 uclasses, devicetree: separate NAND: 128 MiB MMC: mvsdio@90000: 0 Loading Environment from NAND... OK Resetting console stdin/stdout/stderr to serial... In: serial Out: serial Err: serial pcie0.0: Link up Net: eth0: ethernet-controller@72000 ethernet-controller@72000 Waiting for PHY auto negotiation to complete........ done Using ethernet-controller@72000 device ARP Retry count exceeded; starting again ping failed; host 192.168.0.110 is not alive ethernet-controller@72000 Waiting for PHY auto negotiation to complete........ done Using ethernet-controller@72000 device ARP Retry count exceeded; starting again ping failed; host 192.168.0.110 is not alive ethernet-controller@72000 Waiting for PHY auto negotiation to complete........ done Using ethernet-controller@72000 device ARP Retry count exceeded; starting again ping failed; host 192.168.0.110 is not alive Hit any key to stop autoboot: 0 Initializing devices... resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 1 USB Device(s) found scanning bus xhci_pci for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 1 USB Device(s) found scanning bus xhci_pci for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Loading envs from mmc 0... Failed to load '/boot/uEnv.txt' Loading envs from mmc 1... ** Bad device specification mmc 1 ** Couldn't find partition mmc 1:1 Can't set block device Loading envs from mmc 2... ** Bad device specification mmc 2 ** Couldn't find partition mmc 2:1 Can't set block device Loading envs from mmc 3... ** Bad device specification mmc 3 ** Couldn't find partition mmc 3:1 Can't set block device Loading envs from usb 0... ** Bad device specification usb 0 ** Couldn't find partition usb 0:1 Can't set block device Loading envs from usb 1... ** Bad device specification usb 1 ** Couldn't find partition usb 1:1 Can't set block device Loading envs from usb 2... ** Bad device specification usb 2 ** Couldn't find partition usb 2:1 Can't set block device Loading envs from usb 3... ** Bad device specification usb 3 ** Couldn't find partition usb 3:1 Can't set block device Loading envs from sata 0... ** Bad device specification sata 0 ** Couldn't find partition sata 0:1 Can't set block device Loading envs from sata 1... ** Bad device specification sata 1 ** Couldn't find partition sata 1:1 Can't set block device Loading envs from sata 2... ** Bad device specification sata 2 ** Couldn't find partition sata 2:1 Can't set block device Loading envs from sata 3... ** Bad device specification sata 3 ** Couldn't find partition sata 3:1 Can't set block device running scan_disk ... Scan device mmc device mmc 0:1 1 bytes read in 10 ms (0 Bytes/s) Found bootable drive on mmc 0 loading uImage ... 6223944 bytes read in 148 ms (40.1 MiB/s) loading uInitrd ... 5791271 bytes read in 138 ms (40 MiB/s) loading DTB /boot/dts/kirkwood-pogoplug_v4.dtb ... 10178 bytes read in 17 ms (584 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-6.5.7-kirkwood-tld-1 Created: 2023-10-31 22:53:22 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6223880 Bytes = 5.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02100000 ... Image Name: initramfs-6.5.7-kirkwood-tld-1 Created: 2023-10-31 22:53:55 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 5791207 Bytes = 5.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Working FDT set to 1c00000 Starting kernel ... Loading Kernel Image Loading Ramdisk to 075c7000, end 07b4cde7 ... OK Loading Device Tree to 075c1000, end 075c67c1 ... OK Working FDT set to 75c1000 Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.5.7-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #2 PREEMPT Wed Oct 18 21:14:11 PDT 2023 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Pogoplug v4 [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 102528K/131072K available (12288K kernel code, 1755K rwdata, 5416K rodata, 1024K init, 301K bss, 28544K reserved, 0K cma-reserved) [ 0.000000][ T0] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000002][ T0] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12884901885ns [ 0.000075][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.000980][ T0] Console: colour dummy device 80x30 [ 0.001093][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.001140][ T0] CPU: Testing write buffer coherency: ok [ 0.001344][ T0] pid_max: default: 32768 minimum: 301 [ 0.014561][ T0] LSM: initializing lsm=capability,integrity [ 0.018157][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.018214][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.037294][ T1] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.037869][ T1] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.038612][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.039112][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.039771][ T1] rcu: Hierarchical SRCU implementation. [ 0.039797][ T1] rcu: Max phase no-delay instances is 1000. [ 0.044461][ T1] devtmpfs: initialized [ 0.058229][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.058297][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.062889][ T1] prandom: seed boundary self test passed [ 0.069258][ T1] prandom: 100 self tests passed [ 0.069283][ T1] pinctrl core: initialized pinctrl subsystem [ 0.075245][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.076800][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.085797][ T1] audit: initializing netlink subsys (disabled) [ 0.089017][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.089277][ T19] audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1 [ 0.089356][ T1] cpuidle: using governor ladder [ 0.089486][ T1] cpuidle: using governor menu [ 0.090517][ T1] Feroceon L2: Enabling L2 [ 0.090570][ T1] Feroceon L2: Cache support initialised. [ 0.105048][ T1] No ATAGs? [ 0.460101][ T1] raid6: int32x8 gen() 74 MB/s [ 0.800092][ T1] raid6: int32x4 gen() 73 MB/s [ 1.150098][ T1] raid6: int32x2 gen() 99 MB/s [ 1.490096][ T1] raid6: int32x1 gen() 75 MB/s [ 1.490117][ T1] raid6: using algorithm int32x2 gen() 99 MB/s [ 1.830091][ T1] raid6: .... xor() 61 MB/s, rmw enabled [ 1.830110][ T1] raid6: using intx1 recovery algorithm [ 1.832586][ T1] SCSI subsystem initialized [ 1.833654][ T1] usbcore: registered new interface driver usbfs [ 1.833755][ T1] usbcore: registered new interface driver hub [ 1.833897][ T1] usbcore: registered new device driver usb [ 1.834478][ T1] pps_core: LinuxPPS API ver. 1 registered [ 1.834491][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.834540][ T1] PTP clock support registered [ 1.838706][ T1] vgaarb: loaded [ 1.839871][ T1] clocksource: Switched to clocksource orion_clocksource [ 1.864099][ T1] VFS: Disk quotas dquot_6.6.0 [ 1.864743][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.910235][ T1] NET: Registered PF_INET protocol family [ 1.920039][ T1] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.922925][ T1] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.923326][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.923367][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.923417][ T1] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 1.923467][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 1.924508][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.924868][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.924922][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.926254][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.940843][ T1] RPC: Registered named UNIX socket transport module. [ 1.940863][ T1] RPC: Registered udp transport module. [ 1.940872][ T1] RPC: Registered tcp transport module. [ 1.940881][ T1] RPC: Registered tcp-with-tls transport module. [ 1.940890][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.940921][ T1] PCI: CLS 0 bytes, default 32 [ 1.945142][ T32] Trying to unpack rootfs image as initramfs... [ 3.393379][ T32] Freeing initrd memory: 5656K [ 5.107593][ T1] Initialise system trusted keyrings [ 5.107773][ T1] Key type blacklist registered [ 5.109813][ T1] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 5.110185][ T1] zbud: loaded [ 5.138837][ T1] NFS: Registering the id_resolver key type [ 5.138953][ T1] Key type id_resolver registered [ 5.138968][ T1] Key type id_legacy registered [ 5.139253][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 5.139285][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 5.141764][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 5.143178][ T1] fuse: init (API version 7.38) [ 5.145314][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 5.145848][ T1] orangefs_init: module version upstream loaded [ 5.146436][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled [ 5.462818][ T1] xor: measuring software checksum speed [ 5.476085][ T1] arm4regs : 746 MB/sec [ 5.498120][ T1] 8regs : 447 MB/sec [ 5.513669][ T1] 32regs : 634 MB/sec [ 5.513684][ T1] xor: using function: arm4regs (746 MB/sec) [ 5.513706][ T1] async_tx: api initialized (async) [ 5.513731][ T1] Key type asymmetric registered [ 5.513742][ T1] Asymmetric key parser 'x509' registered [ 5.589044][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 5.589711][ T1] io scheduler bfq registered [ 5.872077][ T1] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 47 [ 5.872111][ T1] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 49 [ 5.872876][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 5.875303][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 5.877315][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 5.878922][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges: [ 5.879042][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000 [ 5.879109][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 5.879152][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 5.880510][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 5.880542][ T1] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.880571][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff]) [ 5.880598][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 5.880622][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 5.880862][ T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 5.883198][ T1] PCI: bus0: Fast back to back transfers disabled [ 5.883239][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.883684][ T1] pci 0000:01:00.0: [1b73:1009] type 00 class 0x0c0330 [ 5.883736][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x9000ffff 64bit] [ 5.883777][ T1] pci 0000:01:00.0: reg 0x18: [mem 0x90010000-0x90010fff 64bit] [ 5.883815][ T1] pci 0000:01:00.0: reg 0x20: [mem 0x90011000-0x90011fff 64bit] [ 5.883958][ T1] pci 0000:01:00.0: supports D1 [ 5.883976][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 5.884067][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 5.910029][ T1] PCI: bus1: Fast back to back transfers disabled [ 5.910065][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 5.910146][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 5.910182][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 5.910219][ T1] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit] [ 5.910255][ T1] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit] [ 5.910291][ T1] pci 0000:00:01.0: PCI bridge to [bus 01] [ 5.910316][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 5.910552][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 5.912045][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 5.993853][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 6.001164][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 6.073846][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 6.081504][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 6.085421][ T1] printk: console [ttyS0] disabled [ 6.086391][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 28, base_baud = 10416666) is a 16550A [ 6.086490][ T1] printk: console [ttyS0] enabled [ 7.201041][ T1] loop: module loaded [ 7.206496][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 7.219200][ T1] scsi host0: sata_mv [ 7.225563][ T1] scsi host1: sata_mv [ 7.230137][ T1] ata1: SATA max UDMA/133 irq 29 [ 7.234934][ T1] ata2: SATA max UDMA/133 irq 29 [ 7.241855][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 7.248906][ T1] nand: Hynix H27U1G8F2BTR-BC [ 7.253479][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.261801][ T1] Scanning device for bad blocks [ 7.271485][ T1] Bad eraseblock 58 at 0x000000740000 [ 7.356911][ T1] 5 cmdlinepart partitions found on MTD device orion_nand [ 7.363885][ T1] Creating 5 MTD partitions on "orion_nand": [ 7.369713][ T1] 0x000000000000-0x000000200000 : "u-boot" [ 7.376620][ T1] 0x000000200000-0x000000500000 : "uImage" [ 7.383430][ T1] 0x000000500000-0x000000800000 : "uImage2" [ 7.390325][ T1] 0x000000800000-0x000001000000 : "failsafe" [ 7.397259][ T1] 0x000001000000-0x000008000000 : "root" [ 7.405971][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 7.414534][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 7.464454][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 7.573697][ T53] ata1: SATA link down (SStatus 0 SControl F300) [ 7.921691][ T55] ata2: SATA link down (SStatus 0 SControl F300) [ 8.211824][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:f9:62 [ 8.222239][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 8.228465][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 8.237215][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 8.269917][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 8.277094][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 8.286083][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.294010][ T1] usb usb1: Product: EHCI Host Controller [ 8.299573][ T1] usb usb1: Manufacturer: Linux 6.5.7-kirkwood-tld-1 ehci_hcd [ 8.306891][ T1] usb usb1: SerialNumber: f1050000.ehci [ 8.313895][ T1] hub 1-0:1.0: USB hub found [ 8.318412][ T1] hub 1-0:1.0: 1 port detected [ 8.324871][ T1] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 8.330947][ T1] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 8.341067][ T1] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 8.352219][ T1] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 8.358158][ T1] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 8.366302][ T1] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 8.373700][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 8.382684][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.390613][ T1] usb usb2: Product: xHCI Host Controller [ 8.396177][ T1] usb usb2: Manufacturer: Linux 6.5.7-kirkwood-tld-1 xhci-hcd [ 8.403495][ T1] usb usb2: SerialNumber: 0000:01:00.0 [ 8.410295][ T1] hub 2-0:1.0: USB hub found [ 8.414810][ T1] hub 2-0:1.0: 2 ports detected [ 8.420945][ T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.430056][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 8.439006][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.446935][ T1] usb usb3: Product: xHCI Host Controller [ 8.452776][ T1] usb usb3: Manufacturer: Linux 6.5.7-kirkwood-tld-1 xhci-hcd [ 8.460113][ T1] usb usb3: SerialNumber: 0000:01:00.0 [ 8.466777][ T1] hub 3-0:1.0: USB hub found [ 8.471376][ T1] hub 3-0:1.0: 2 ports detected [ 8.477734][ T1] usbcore: registered new interface driver usb-storage [ 8.485703][ T1] mousedev: PS/2 mouse device common for all mice [ 9.529921][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 9.536385][ T1] i2c_dev: i2c /dev entries driver [ 9.543080][ T1] device-mapper: uevent: version 1.0.3 [ 9.549343][ T1] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 9.559591][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 9.566917][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 9.574262][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 9.581697][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 9.591225][ T1] ledtrig-cpu: registered to indicate activity on CPUs [ 9.598077][ T1] hid: raw HID events driver (C) Jiri Kosina [ 9.604634][ T1] drop_monitor: Initializing network drop monitor service [ 9.613962][ T1] NET: Registered PF_INET6 protocol family [ 9.622912][ T1] Segment Routing with IPv6 [ 9.627281][ T1] RPL Segment Routing with IPv6 [ 9.632235][ T1] In-situ OAM (IOAM) with IPv6 [ 9.637027][ T1] NET: Registered PF_PACKET protocol family [ 9.643309][ T1] Key type dns_resolver registered [ 9.676776][ T1] registered taskstats version 1 [ 9.682200][ T1] Loading compiled-in X.509 certificates [ 9.719993][ T1] Key type .fscrypt registered [ 9.724631][ T1] Key type fscrypt-provisioning registered [ 9.740796][ T1] Key type big_key registered [ 9.812968][ T1] Key type encrypted registered [ 9.977838][ T104] "cryptomgr_test" (104) uses obsolete ecb(arc4) skcipher [ 13.406337][ T1] clk: Disabling unused clocks [ 13.416057][ T1] Freeing unused kernel image (initmem) memory: 1024K [ 13.431248][ T1] Checked W+X mappings: passed, no W+X pages found [ 13.437621][ T1] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.17-1~deb12u1 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! LABEL=rootfs does not exist. Dropping to a shell! BusyBox v1.35.0 (Debian 1:1.35.0-4+b3) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)
baudrate=115200 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=if run load_uimage; then; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=2 bootdev=mmc console=ttyS0,115200 device=0:1 devices=mmc usb sata disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-pogoplug_v4.dtb ethact=ethernet-controller@72000 ethaddr=00:25:31:05:f9:62 fdtcontroladdr=7b51650 if_netconsole=ping $serverip ipaddr=192.168.0.111 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x2100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 mtdparts=mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) nc_ready=0 preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb reset; sleep 1; usb reset"; setenv scan_sata "sata init"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.110 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin serial,nc; setenv stdout serial,nc; setenv stderr serial,nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=echo Initializing devices...; setenv init_usb "usb reset; sleep 1; usb reset"; setenv init_sata sata init; setenv init_mmc mmc rescan; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in $disks; do if test $uenv_loaded -eq 0; then setenv device_type $devtype; setenv disk_number $disknum; run uenv_read; fi; done; done; uenv_read=echo Loading envs from $device_type $disk_number...; if load $device_type $disk_number:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; echo ... envs loaded; fi ver=U-Boot 2023.04-tld-1 (Jun 11 2023 - 16:24:44 -0700)\ Pogoplug V4 Environment size: 3021/131068 bytes Pogo_V4>
Re: Help with booting Pogo V4 January 04, 2024 12:35AM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
It seems I'm skipping something or maybe it's because of having 2 partitions on the same card, nevertheless if I turn off the Pogo, insert the original 2GB SDcard from 2 years ago or even the 1-partition 64GB card from 2 days ago, the device boots flawlessly.
cd /media/sdc1/boot mv uImage uImage.6.5.7-kirkwood-tld-1 cp -a /media/sdb1/uImage .
sync umount /media/sdc1
Re: Help with booting Pogo V4 January 04, 2024 02:45AM |
Registered: 10 years ago Posts: 12 |
GNU Parted 3.5 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: Generic- USB3.0 CRW -SD (scsi) Disk /dev/sda: 62.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 18.7GB 18.7GB primary ext4 2 18.7GB 62.2GB 43.6GB primary ext4 (parted) mklabel gpt Warning: The existing disk label on /dev/sda will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? y (parted) mkpart primary ext4 0% 30% (parted) mkpart primary ext4 30% 100% (parted) name 1 rootfs (parted) name 2 storage (parted) set 1 esp on (parted) q Information: You may need to update /etc/fstab. root@debian:~# [ 459.485645][ T236] sda: sda1 sda2 root@debian:~# sync
sync fsck -A -l -V /dev/sda1
shutdown -h now
apt updateI got the following message:
14 packages can be upgraded. Run 'apt list --upgradable' to see themSo I run
apt dist-upgrade sync shutdown -r now
Re: Help with booting Pogo V4 January 05, 2024 02:14AM |
Admin Registered: 13 years ago Posts: 18,821 |