On Guruplug I have Wheezy running on a usb drive. How can I mount my nand root partition. I am running sheeva-with-linux kernel 3.7.1.
# cat /proc/mtd
dev: size erasesize name
mtd0: 00100000 00020000 "u-boot"
mtd1: 00400000 00020000 "uImage"
mtd2: 1fb00000 00020000 "root"
# mtdinfo -a
Count of MTD devices: 3
Present MTD devices: mtd0, mtd1, mtd2
Sysfs interface supported: yes
mtd0
Name: u-boot
Type: nand
Eraseblock size: 131072 bytes, 128.0 KiB
Amount of eraseblocks: 8 (1048576 bytes, 1024.0 KiB)
Minimum input/output unit size: 2048 bytes
Sub-page size: 512 bytes
OOB size: 64 bytes
Character device major/minor: 90:0
Bad blocks are allowed: true
Device is writable: true
mtd1
Name: uImage
Type: nand
Eraseblock size: 131072 bytes, 128.0 KiB
Amount of eraseblocks: 32 (4194304 bytes, 4.0 MiB)
Minimum input/output unit size: 2048 bytes
Sub-page size: 512 bytes
OOB size: 64 bytes
Character device major/minor: 90:2
Bad blocks are allowed: true
Device is writable: true
mtd2
Name: root
Type: nand
Eraseblock size: 131072 bytes, 128.0 KiB
Amount of eraseblocks: 4056 (531628032 bytes, 507.0 MiB)
Minimum input/output unit size: 2048 bytes
Sub-page size: 512 bytes
OOB size: 64 bytes
Character device major/minor: 90:4
Bad blocks are allowed: true
Device is writable: true