Re: Can't boot into debian after powerfail October 02, 2010 09:18AM |
Registered: 14 years ago Posts: 34 |
Re: Can't boot into debian after powerfail October 02, 2010 09:24AM |
Admin Registered: 14 years ago Posts: 304 |
Re: Can't boot into debian after powerfail October 02, 2010 10:14AM |
Registered: 14 years ago Posts: 34 |
Re: Can't boot into debian after powerfail October 02, 2010 10:27AM |
Registered: 14 years ago Posts: 34 |
Re: Can't boot into debian after powerfail October 02, 2010 10:54AM |
Admin Registered: 14 years ago Posts: 304 |
Re: Can't boot into debian after powerfail October 02, 2010 12:22PM |
Registered: 14 years ago Posts: 34 |
Quote
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19
Error reading superblock on volume 'ubi:rootfs'!
Re: Can't boot into debian after powerfail October 02, 2010 12:40PM |
Admin Registered: 14 years ago Posts: 304 |
Re: Can't boot into debian after powerfail October 02, 2010 12:44PM |
Registered: 14 years ago Posts: 34 |
Charles
Re: Can't boot into debian after powerfail April 24, 2011 08:32PM |
dpffan
Re: Can't boot into debian after powerfail April 25, 2011 03:02AM |
Re: Can't boot into debian after powerfail April 26, 2011 04:03AM |
Registered: 14 years ago Posts: 28 |
Chaes
Re: Can't boot into debian after powerfail April 30, 2011 08:46PM |
Re: Can't boot into debian after powerfail March 12, 2012 07:01PM |
Registered: 13 years ago Posts: 12 |
ext2load usb 0:1 0x800000 /uImage-mtd1.img
Re: Can't boot into debian after powerfail March 12, 2012 10:39PM |
Registered: 13 years ago Posts: 502 |
Re: Can't boot into debian after powerfail March 13, 2012 10:50AM |
Registered: 13 years ago Posts: 12 |
Re: Can't boot into debian after powerfail April 26, 2012 04:33AM |
Registered: 13 years ago Posts: 3 |
Re: Can't boot into debian after powerfail April 26, 2012 04:57AM |
Registered: 14 years ago Posts: 78 |
Re: Can't boot into debian after powerfail April 26, 2012 07:59AM |
Admin Registered: 14 years ago Posts: 304 |
Re: Can't boot into debian after powerfail August 30, 2012 12:38PM |
Registered: 12 years ago Posts: 1 |
Re: Can't boot into debian after powerfail August 30, 2012 08:15PM |
Admin Registered: 14 years ago Posts: 304 |
dth
Re: Can't boot into debian after powerfail September 07, 2012 03:11PM |
Re: Can't boot into debian after powerfail October 15, 2012 06:14PM |
Registered: 12 years ago Posts: 2 |
Sheda
Re: Can't boot into debian after powerfail April 20, 2013 10:04AM |
U-Boot 2010.06-00695-gbd23130-dirty (Aug 30 2010 - 23:04:56) Marvell-Dockstar/Pogoplug by Jeff Doozan SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Marvell>> run ethact bootdelay baudrate arcNumber mainlineLinux console led_init led_exit led_error mtdparts mtdids partition rescue_set_bootargs rescue_bootcmd pogo_bootcmd force_rescue force_rescue_bootcmd ubifs_mtd ... Marvell>> run rescue_bootcmd NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32.18-dockstar Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3236180 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux............................................................................................................................................................................................................. done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.18-dockstar (root@stfu.tcbnet) (gcc version 4.3.5 (Buildroot 2010.08) ) #1 Thu Feb 17 03:09:57 EST 2011 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Marvell SheevaPlug Reference Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 122836KB available (5968K code, 708K data, 128K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000000] Console: colour dummy device 80x30 [ 0.000122] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 0.240079] Security Framework initialized [ 0.240099] SELinux: Disabled at boot. [ 0.240120] Mount-cache hash table entries: 512 [ 0.240370] Initializing cgroup subsys ns [ 0.240382] Initializing cgroup subsys cpuacct [ 0.240391] Initializing cgroup subsys devices [ 0.240400] Initializing cgroup subsys freezer [ 0.240407] Initializing cgroup subsys net_cls [ 0.240440] CPU: Testing write buffer coherency: ok [ 0.240988] devtmpfs: initialized [ 0.242407] regulator: core version 0.5 [ 0.242578] NET: Registered protocol family 16 [ 0.242965] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 0.242978] Feroceon L2: Cache support initialised. [ 0.246004] bio: create slab <bio-0> at 0 [ 0.246287] vgaarb: loaded [ 0.246560] SCSI subsystem initialized [ 0.246815] usbcore: registered new interface driver usbfs [ 0.246881] usbcore: registered new interface driver hub [ 0.246969] usbcore: registered new device driver usb [ 0.247415] Switching to clocksource orion_clocksource [ 0.252774] NET: Registered protocol family 2 [ 0.253035] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.253850] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.253949] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.254002] TCP: Hash tables configured (established 4096 bind 4096) [ 0.254011] TCP reno registered [ 0.254171] NET: Registered protocol family 1 [ 0.254436] RPC: Registered udp transport module. [ 0.254446] RPC: Registered tcp transport module. [ 0.254453] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.254591] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.254842] audit: initializing netlink socket (disabled) [ 0.254875] type=2000 audit(0.242:1): initialized [ 0.261683] VFS: Disk quotas dquot_6.5.2 [ 0.261942] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.264532] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.266143] Registering the dns_resolver key type [ 0.266195] Slow work thread pool: Starting up [ 0.266314] Slow work thread pool: Ready [ 0.266323] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.267088] fuse init (API version 7.13) [ 0.267578] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.269123] msgmni has been set to 240 [ 0.271206] alg: No test for stdrng (krng) [ 0.271360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.271373] io scheduler noop registered [ 0.271381] io scheduler anticipatory registered [ 0.271388] io scheduler deadline registered [ 0.271648] io scheduler cfq registered (default) [ 0.277626] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.278086] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.660095] console [ttyS0] enabled [ 0.664183] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) [ 0.672802] Scanning device for bad blocks [ 0.752848] 4 cmdlinepart partitions found on MTD device orion_nand [ 0.759165] Creating 4 MTD partitions on "orion_nand": [ 0.764331] 0x000000000000-0x000000100000 : "u-boot" [ 0.769884] 0x000000100000-0x000000500000 : "uImage" [ 0.775317] 0x000000500000-0x000002500000 : "rootfs" [ 0.780806] 0x000002500000-0x000010000000 : "data" [ 0.786493] UBI: attaching mtd2 to ubi0 [ 0.790368] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 0.796668] UBI: logical eraseblock size: 129024 bytes [ 0.802100] UBI: smallest flash I/O unit: 2048 [ 0.806826] UBI: sub-page size: 512 [ 0.811474] UBI: VID header offset: 512 (aligned 512) [ 0.817333] UBI: data offset: 2048 [ 0.881758] UBI: attached mtd2 to ubi0 [ 0.885524] UBI: MTD device name: "rootfs" [ 0.890621] UBI: MTD device size: 32 MiB [ 0.895516] UBI: number of good PEBs: 256 [ 0.900164] UBI: number of bad PEBs: 0 [ 0.904628] UBI: max. allowed volumes: 128 [ 0.909277] UBI: wear-leveling threshold: 4096 [ 0.914002] UBI: number of internal volumes: 1 [ 0.918476] UBI: number of user volumes: 1 [ 0.922941] UBI: available PEBs: 0 [ 0.927405] UBI: total number of reserved PEBs: 256 [ 0.932314] UBI: number of PEBs reserved for bad PEB handling: 2 [ 0.938357] UBI: max/mean erase counter: 1/0 [ 0.942648] UBI: image sequence number: 1653365787 [ 0.947478] UBI: background thread "ubi_bgt0d" started, PID 38 [ 0.953512] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 0.959290] mv643xx_eth smi: probed [ 0.964583] net eth0: port 0 with MAC address 00:10:75:1a:d2:df [ 0.970630] console [netcon0] enabled [ 0.974311] netconsole: network logging started [ 0.978878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.985474] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 0.990790] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 1.027466] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 1.047452] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 1.053457] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.060289] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.067556] usb usb1: Product: Marvell Orion EHCI [ 1.072280] usb usb1: Manufacturer: Linux 2.6.32.18-dockstar ehci_hcd [ 1.078760] usb usb1: SerialNumber: orion-ehci.0 [ 1.083671] usb usb1: configuration #1 chosen from 1 choice [ 1.089403] hub 1-0:1.0: USB hub found [ 1.093203] hub 1-0:1.0: 1 port detected [ 1.097372] Initializing USB Mass Storage driver... [ 1.102379] usbcore: registered new interface driver usb-storage [ 1.108435] USB Mass Storage support registered. [ 1.113281] mice: PS/2 mouse device common for all mice [ 1.118600] i2c /dev entries driver [ 1.122870] device-mapper: uevent: version 1.0.3 [ 1.127915] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.136482] cpuidle: using governor ladder [ 1.140748] cpuidle: using governor menu [ 1.144793] Registered led device: plug:green:health [ 1.149858] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 1.156263] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 1.197480] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 1.237481] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 1.277482] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 1.317482] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 1.323298] Netfilter messages via NETLINK v0.30. [ 1.328100] nf_conntrack version 0.5.0 (1921 buckets, 7684 max) [ 1.334527] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 1.341974] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 1.349949] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 1.358506] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.363893] TCP cubic registered [ 1.367140] NET: Registered protocol family 17 [ 1.372005] registered taskstats version 1 [ 1.376814] Initalizing network drop monitor service [ 1.381901] md: Waiting for all devices to be available before autodetect [ 1.388734] md: If you don't use raid, use raid=noautodetect [ 1.394812] md: Autodetecting RAID arrays. [ 1.398951] md: Scanned 0 and added 0 devices. [ 1.403412] md: autorun ... [ 1.406212] md: ... autorun DONE. [ 1.409575] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 1.519954] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 1.525991] UBIFS: mounted read-only [ 1.529607] UBIFS: file system size: 30836736 bytes (30114 KiB, 29 MiB, 239 LEBs) [ 1.537302] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) [ 1.544654] UBIFS: media format: w4/r0 (latest is w4/r0) [ 1.550520] UBIFS: default compressor: lzo [ 1.554635] UBIFS: reserved for root: 0 bytes (0 KiB) [ 1.559840] UBIFS error (pid 1): ubifs_read_node: bad node type (255 but expected 9) [ 1.567633] UBIFS error (pid 1): ubifs_read_node: bad node at LEB 218:88824 [ 1.574634] UBIFS error (pid 1): ubifs_iget: failed to read inode 1, error -22 [ 1.582102] List of all partitions: [ 1.585638] 1f00 1024 mtdblock0 (driver?) [ 1.590654] 1f01 4096 mtdblock1 (driver?) [ 1.595650] 1f02 32768 mtdblock2 (driver?) [ 1.600664] 1f03 224256 mtdblock3 (driver?) [ 1.605656] No filesystem could mount root, tried: ubifs [ 1.611110] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.619454] [<c002eee4>] (unwind_backtrace+0x0/0xdc) from [<c04a31d4>] (panic+0x34/0x128) [ 1.627691] [<c04a31d4>] (panic+0x34/0x128) from [<c0008f5c>] (mount_block_root+0x25c/0x2b4) [ 1.636177] [<c0008f5c>] (mount_block_root+0x25c/0x2b4) from [<c00090b0>] (prepare_namespace+0x90/0x190) [ 1.645717] [<c00090b0>] (prepare_namespace+0x90/0x190) from [<c00085e0>] (kernel_init+0xf0/0x12c) [ 1.654742] [<c00085e0>] (kernel_init+0xf0/0x12c) from [<c0029e7c>] (kernel_thread_exit+0x0/0x8)
sheda@ubuntu:/.../41b8d6f8-be3b-4e43-a322-6ddcfba505fe$ sudo md5sum * md5sum: lost+found: Is a directory bc1e655a4317d9cc9df4a6b5993309d0 rootfs-mtd2.img a98deeb9323061ecb3e0e7925ae05f1e uboot.environment 20ddef9a75b17659fb5ec03057ce010c uImage-mtd1.img
sheda
Re: Can't boot into debian after powerfail April 23, 2013 06:22AM |
lobo
Re: Can't boot into debian after powerfail May 03, 2013 05:40PM |
GoFlexNet> run rescue_bootcmd NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32.18-dockstar Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3236180 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux............................................................................................................................................................................................................. done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.18-dockstar (root@stfu.tcbnet) (gcc version 4.3.5 (Buildroot 2010.08) ) #1 Thu Feb 17 03:09:57 EST 2011 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Marvell SheevaPlug Reference Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 122836KB available (5968K code, 708K data, 128K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000000] Console: colour dummy device 80x30 [ 0.000136] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 0.240093] Security Framework initialized [ 0.240115] SELinux: Disabled at boot. [ 0.240144] Mount-cache hash table entries: 512 [ 0.240457] Initializing cgroup subsys ns [ 0.240473] Initializing cgroup subsys cpuacct [ 0.240483] Initializing cgroup subsys devices [ 0.240492] Initializing cgroup subsys freezer [ 0.240500] Initializing cgroup subsys net_cls [ 0.240546] CPU: Testing write buffer coherency: ok [ 0.241352] devtmpfs: initialized [ 0.243101] regulator: core version 0.5 [ 0.243331] NET: Registered protocol family 16 [ 0.243864] Kirkwood: MV88F6281-A1, TCLK=200000000. [ 0.243878] Feroceon L2: Enabling L2 [ 0.243913] Feroceon L2: Cache support initialised. [ 0.247005] bio: create slab <bio-0> at 0 [ 0.247279] vgaarb: loaded [ 0.247556] SCSI subsystem initialized [ 0.247805] usbcore: registered new interface driver usbfs [ 0.247872] usbcore: registered new interface driver hub [ 0.247959] usbcore: registered new device driver usb [ 0.248402] Switching to clocksource orion_clocksource [ 0.253726] NET: Registered protocol family 2 [ 0.253990] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.254806] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.254906] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.254959] TCP: Hash tables configured (established 4096 bind 4096) [ 0.254968] TCP reno registered [ 0.255127] NET: Registered protocol family 1 [ 0.255416] RPC: Registered udp transport module. [ 0.255426] RPC: Registered tcp transport module. [ 0.255433] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.255574] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.255823] audit: initializing netlink socket (disabled) [ 0.255856] type=2000 audit(0.241:1): initialized [ 0.262650] VFS: Disk quotas dquot_6.5.2 [ 0.262911] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.265495] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.267105] Registering the dns_resolver key type [ 0.267157] Slow work thread pool: Starting up [ 0.267275] Slow work thread pool: Ready [ 0.267284] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.268049] fuse init (API version 7.13) [ 0.268542] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.270091] msgmni has been set to 240 [ 0.272172] alg: No test for stdrng (krng) [ 0.272326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.272338] io scheduler noop registered [ 0.272346] io scheduler anticipatory registered [ 0.272354] io scheduler deadline registered [ 0.272613] io scheduler cfq registered (default) [ 0.278596] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.279056] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.664646] console [ttyS0] enabled [ 0.668764] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) [ 0.677338] Scanning device for bad blocks [ 0.686402] Bad eraseblock 132 at 0x000001080000 [ 0.711473] Bad eraseblock 683 at 0x000005560000 [ 0.753357] Bad eraseblock 1688 at 0x00000d300000 [ 0.766052] Bad eraseblock 1903 at 0x00000ede0000 [ 0.776140] 4 cmdlinepart partitions found on MTD device orion_nand [ 0.782453] Creating 4 MTD partitions on "orion_nand": [ 0.787621] 0x000000000000-0x000000100000 : "u-boot" [ 0.793180] 0x000000100000-0x000000500000 : "uImage" [ 0.798630] 0x000000500000-0x000002500000 : "rootfs" [ 0.804091] 0x000002500000-0x000010000000 : "data" [ 0.809795] UBI: attaching mtd2 to ubi0 [ 0.813647] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 0.819960] UBI: logical eraseblock size: 129024 bytes [ 0.825380] UBI: smallest flash I/O unit: 2048 [ 0.830116] UBI: sub-page size: 512 [ 0.834755] UBI: VID header offset: 512 (aligned 512) [ 0.840623] UBI: data offset: 2048 [ 0.904856] UBI: attached mtd2 to ubi0 [ 0.908645] UBI: MTD device name: "rootfs" [ 0.913723] UBI: MTD device size: 32 MiB [ 0.918633] UBI: number of good PEBs: 255 [ 0.923271] UBI: number of bad PEBs: 1 [ 0.927736] UBI: max. allowed volumes: 128 [ 0.932384] UBI: wear-leveling threshold: 4096 [ 0.937110] UBI: number of internal volumes: 1 [ 0.941583] UBI: number of user volumes: 1 [ 0.946047] UBI: available PEBs: 0 [ 0.950520] UBI: total number of reserved PEBs: 255 [ 0.955422] UBI: number of PEBs reserved for bad PEB handling: 2 [ 0.961464] UBI: max/mean erase counter: 1/0 [ 0.965755] UBI: image sequence number: 1653365787 [ 0.970585] UBI: background thread "ubi_bgt0d" started, PID 38 [ 0.976621] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 0.982398] mv643xx_eth smi: probed [ 0.987669] net eth0: port 0 with MAC address 00:10:75:26:3a:87 [ 0.993710] console [netcon0] enabled [ 0.997391] netconsole: network logging started [ 1.001958] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.008567] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 1.013873] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 1.048455] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 1.068440] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 1.074445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.081278] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.088543] usb usb1: Product: Marvell Orion EHCI [ 1.093269] usb usb1: Manufacturer: Linux 2.6.32.18-dockstar ehci_hcd [ 1.099747] usb usb1: SerialNumber: orion-ehci.0 [ 1.104659] usb usb1: configuration #1 chosen from 1 choice [ 1.110389] hub 1-0:1.0: USB hub found [ 1.114181] hub 1-0:1.0: 1 port detected [ 1.118352] Initializing USB Mass Storage driver... [ 1.123368] usbcore: registered new interface driver usb-storage [ 1.129422] USB Mass Storage support registered. [ 1.134269] mice: PS/2 mouse device common for all mice [ 1.139588] i2c /dev entries driver [ 1.143861] device-mapper: uevent: version 1.0.3 [ 1.148912] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.157479] cpuidle: using governor ladder [ 1.161747] cpuidle: using governor menu [ 1.165788] Registered led device: plug:green:health [ 1.170857] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 1.177258] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 1.218469] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 1.258471] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 1.298470] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 1.338470] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 1.344286] Netfilter messages via NETLINK v0.30. [ 1.349080] nf_conntrack version 0.5.0 (1921 buckets, 7684 max) [ 1.355510] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 1.362962] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 1.370936] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 1.379496] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.384889] TCP cubic registered [ 1.388127] NET: Registered protocol family 17 [ 1.392994] registered taskstats version 1 [ 1.397803] Initalizing network drop monitor service [ 1.402890] md: Waiting for all devices to be available before autodetect [ 1.409722] md: If you don't use raid, use raid=noautodetect [ 1.415800] md: Autodetecting RAID arrays. [ 1.419940] md: Scanned 0 and added 0 devices. [ 1.424400] md: autorun ... [ 1.427200] md: ... autorun DONE. [ 1.430571] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 1.540981] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 1.547022] UBIFS: mounted read-only [ 1.550639] UBIFS: file system size: 30707712 bytes (29988 KiB, 29 MiB, 238 LEBs) [ 1.558334] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) [ 1.565686] UBIFS: media format: w4/r0 (latest is w4/r0) [ 1.571551] UBIFS: default compressor: lzo [ 1.575667] UBIFS: reserved for root: 0 bytes (0 KiB) [ 1.580871] UBIFS error (pid 1): ubifs_read_node: bad node type (255 but expected 9) [ 1.588665] UBIFS error (pid 1): ubifs_read_node: bad node at LEB 218:88824 [ 1.595666] UBIFS error (pid 1): ubifs_iget: failed to read inode 1, error -22 [ 1.603134] List of all partitions: [ 1.606668] 1f00 1024 mtdblock0 (driver?) [ 1.611687] 1f01 4096 mtdblock1 (driver?) [ 1.616680] 1f02 32768 mtdblock2 (driver?) [ 1.621697] 1f03 224256 mtdblock3 (driver?) [ 1.626688] No filesystem could mount root, tried: ubifs [ 1.632142] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.640486] [<c002eee4>] (unwind_backtrace+0x0/0xdc) from [<c04a31d4>] (panic+0x34/0x128) [ 1.648730] [<c04a31d4>] (panic+0x34/0x128) from [<c0008f5c>] (mount_block_root+0x25c/0x2b4) [ 1.657216] [<c0008f5c>] (mount_block_root+0x25c/0x2b4) from [<c00090b0>] (prepare_namespace+0x90/0x190) [ 1.666757] [<c00090b0>] (prepare_namespace+0x90/0x190) from [<c00085e0>] (kernel_init+0xf0/0x12c) [ 1.675782] [<c00085e0>] (kernel_init+0xf0/0x12c) from [<c0029e7c>] (kernel_thread_exit+0x0/0x8)