|
Need help with systemd using uEnv.txt June 23, 2022 04:17PM |
Registered: 1 year ago Posts: 28 |
arcNumber=3338 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; run bootcmd_lede bootcmd_exec=if run load_uimage; then if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi; fi bootcmd_lede=run set_bootargs_lede; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-goflexhome.dtb ethact=egiga0 ethaddr= if_netconsole=ping $serverip ipaddr=192.168.0.222 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:0x100000@0x0(u-boot),-@0x100000(ubi) partition=nand0,0 preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params set_bootargs_lede=setenv bootargs console=ttyS0,115200 $mtdparts start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in $disks; do if test $uenv_loaded -eq 0; then setenv device_type $devtype; setenv disk_number $disknum; run uenv_read; fi; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi usb_ready_retry=15
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:21:31 -0700)
Seagate GoFlex Home
gcc (Debian 6.3.0-18) 6.3.0 20170516
GNU ld (GNU Binutils for Debian) 2.28
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Reset IDE: Bus 0: OK Bus 1: not available
Device 0: Model: LITEONIT LSS-32L6G-HP Firm: DS51704 Ser#:
Type: Hard Disk
Supports 48-bit addressing
Capacity: 30533.8 MB = 29.8 GB (62533296 x 512)
Unknown command 'mmc' - try 'help'
loading envs from usb 0 ...
** Bad device usb 0 **
loading envs from usb 1 ...
** Bad device usb 1 **
loading envs from usb 2 ...
** Bad device usb 2 **
loading envs from usb 3 ...
** Bad device usb 3 **
loading envs from ide 0 ...
33 bytes read in 8 ms (3.9 KiB/s)
importing envs ...
running scan_disk ...
Scan device usb
device usb 0:1
** Bad device usb 0 **
device usb 1:1
** Bad device usb 1 **
device usb 2:1
** Bad device usb 2 **
device usb 3:1
** Bad device usb 3 **
Scan device ide
Reset IDE: Bus 0: OK Bus 1: not available
Device 0: Model: LITEONIT LSS-32L6G-HP Firm: DS51704 Ser#:
Type: Hard Disk
Supports 48-bit addressing
Capacity: 30533.8 MB = 29.8 GB (62533296 x 512)
device ide 0:1
1 bytes read in 7 ms (0 Bytes/s)
Found bootable drive on ide 0
loading uImage ...
5702912 bytes read in 927 ms (5.9 MiB/s)
loading uInitrd ...
10166127 bytes read in 1607 ms (6 MiB/s)
loading DTB /boot/dts/kirkwood-goflexhome.dtb ...
10257 bytes read in 33 ms (302.7 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-5.17.4-kirkwood-tld-1
Created: 2022-06-23 14:47:13 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5702848 Bytes = 5.4 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-5.17.4-kirkwood-tld-1
Created: 2022-06-23 14:47:18 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 10166063 Bytes = 9.7 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
Booting using the fdt blob at 0x1c00000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.17.4-kirkwood-tld-1 (root@tldDebianVM) (arm-linux-gnueabi-gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1.0 PREEMPT Mon Apr 25 19:49:57 PDT 2022 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Seagate GoFlex Home [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:0x100000@0x0(u-boot),-@0x100000(ubi) init=/bin/systemd [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 99532K/131072K available (11264K kernel code, 1628K rwdata, 5012K rodata, 1024K init, 304K bss, 31540K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u32 called from ____cache_alloc+0x3f4/0x794 with crng_init=0 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000002] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000058] Switching to timer-based delay loop, resolution 5ns [ 0.000922] Console: colour dummy device 80x30 [ 0.000997] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.001040] pid_max: default: 32768 minimum: 301 [ 0.001421] LSM: Security Framework initializing [ 0.001689] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001741] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003084] CPU: Testing write buffer coherency: ok [ 0.005228] cblist_init_generic: Setting adjustable number of callback queues. [ 0.005267] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.005552] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.005933] Setting up static identity map for 0x100000 - 0x100058 [ 0.006240] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.006582] rcu: Hierarchical SRCU implementation. [ 0.008034] devtmpfs: initialized [ 0.013757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.013816] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.051335] prandom32: self test passed (less than 6 bits correlated) [ 0.051383] prandom: seed boundary self test passed [ 0.055654] prandom: 100 self tests passed [ 0.055672] pinctrl core: initialized pinctrl subsystem [ 0.057368] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.058263] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059473] audit: initializing netlink subsys (disabled) [ 0.061133] thermal_sys: Registered thermal governor 'step_wise' [ 0.061508] audit: type=2000 audit(0.050:1): state=initialized audit_enabled=0 res=1 [ 0.061673] cpuidle: using governor ladder [ 0.061774] cpuidle: using governor menu [ 0.062322] Feroceon L2: Enabling L2 [ 0.062378] Feroceon L2: Cache support initialised. [ 0.071895] No ATAGs? [ 0.250298] raid6: int32x8 gen() 108 MB/s [ 0.420251] raid6: int32x4 gen() 95 MB/s [ 0.590159] raid6: int32x2 gen() 138 MB/s [ 0.760073] raid6: int32x1 gen() 99 MB/s [ 0.760092] raid6: using algorithm int32x2 gen() 138 MB/s [ 0.930074] raid6: .... xor() 83 MB/s, rmw enabled [ 0.930092] raid6: using intx1 recovery algorithm [ 0.930392] vgaarb: loaded [ 0.930995] SCSI subsystem initialized [ 0.931265] libata version 3.00 loaded. [ 0.931582] usbcore: registered new interface driver usbfs [ 0.931661] usbcore: registered new interface driver hub [ 0.931722] usbcore: registered new device driver usb [ 0.931980] pps_core: LinuxPPS API ver. 1 registered [ 0.931998] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.932035] PTP clock support registered [ 0.934088] clocksource: Switched to clocksource orion_clocksource [ 1.029581] VFS: Disk quotas dquot_6.6.0 [ 1.029691] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.054228] NET: Registered PF_INET protocol family [ 1.054452] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.055446] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.055499] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.055537] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.055567] TCP: Hash tables configured (established 1024 bind 1024) [ 1.055828] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.055910] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.055950] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.056170] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.064604] RPC: Registered named UNIX socket transport module. [ 1.064631] RPC: Registered udp transport module. [ 1.064643] RPC: Registered tcp transport module. [ 1.064655] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.064674] PCI: CLS 0 bytes, default 32 [ 1.065037] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.066210] Trying to unpack rootfs image as initramfs... [ 2.544111] random: fast init done [ 2.887388] Freeing initrd memory: 9928K [ 3.689186] Initialise system trusted keyrings [ 3.689268] Key type blacklist registered [ 3.689548] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 3.689681] zbud: loaded [ 3.691468] NFS: Registering the id_resolver key type [ 3.691511] Key type id_resolver registered [ 3.691527] Key type id_legacy registered [ 3.691575] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.691602] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.691618] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.691930] jffs2: version 2.2. (NAND) (SUMMARY) \xc2\xa9 2001-2006 Red Hat, Inc. [ 3.692429] fuse: init (API version 7.36) [ 3.692859] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.693091] orangefs_init: module version upstream loaded [ 3.693113] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled [ 3.797619] xor: measuring software checksum speed [ 3.806538] arm4regs : 1112 MB/sec [ 3.821302] 8regs : 667 MB/sec [ 3.831466] 32regs : 971 MB/sec [ 3.831484] xor: using function: arm4regs (1112 MB/sec) [ 3.831506] async_tx: api initialized (async) [ 3.831530] Key type asymmetric registered [ 3.831544] Asymmetric key parser 'x509' registered [ 3.868322] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 3.868515] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 3.868665] io scheduler bfq registered [ 4.062736] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 4.065316] mv_xor f1060800.xor: Marvell shared XOR driver [ 4.125173] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.127777] mv_xor f1060900.xor: Marvell shared XOR driver [ 4.185180] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.188075] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.189546] printk: console [ttyS0] disabled [ 4.189656] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A [ 5.041514] printk: console [ttyS0] enabled [ 5.055274] loop: module loaded [ 5.059475] sata_mv f1080000.sata: version 1.28 [ 5.059810] sata_mv f1080000.sata: slots 32 ports 1 [ 5.067740] scsi host0: sata_mv [ 5.071940] ata1: SATA max UDMA/133 irq 32 [ 5.077815] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xda [ 5.084991] nand: Toshiba NAND 256MiB 3,3V 8-bit [ 5.090331] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 5.098711] Scanning device for bad blocks [ 5.322654] 2 cmdlinepart partitions found on MTD device orion_nand [ 5.329703] Creating 2 MTD partitions on "orion_nand": [ 5.335617] 0x000000000000-0x000000100000 : "u-boot" [ 5.341932] 0x000000100000-0x000010000000 : "ubi" [ 5.349638] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 5.358277] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 5.387096] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.584131] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.591494] ata1.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133 [ 5.598967] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 5.608997] ata1.00: configured for UDMA/133 [ 5.624557] scsi 0:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5 [ 5.634936] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 5.643690] sd 0:0:0:0: [sda] Write Protect is off [ 5.649296] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.649453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.661740] sda: sda1 [ 5.666258] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.155201] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02 [ 6.164869] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.172162] ehci-pci: EHCI PCI platform driver [ 6.177424] ehci-orion: EHCI orion driver [ 6.182381] orion-ehci f1050000.ehci: EHCI Host Controller [ 6.188664] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 6.197276] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 6.224119] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 6.231159] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 6.240207] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.248194] usb usb1: Product: EHCI Host Controller [ 6.253799] usb usb1: Manufacturer: Linux 5.17.4-kirkwood-tld-1 ehci_hcd [ 6.261257] usb usb1: SerialNumber: f1050000.ehci [ 6.267459] hub 1-0:1.0: USB hub found [ 6.271988] hub 1-0:1.0: 1 port detected [ 6.277513] usbcore: registered new interface driver usb-storage [ 6.284763] mousedev: PS/2 mouse device common for all mice [ 6.292176] rtc-mv f1010300.rtc: registered as rtc0 [ 6.297887] rtc-mv f1010300.rtc: setting system clock to 2022-06-23T20:28:19 UTC (1656016099) [ 6.308343] i2c_dev: i2c /dev entries driver [ 6.314041] device-mapper: uevent: version 1.0.3 [ 6.319747] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 6.329434] device-mapper: multipath round-robin: version 1.2.0 loaded [ 6.336764] device-mapper: multipath queue-length: version 0.2.0 loaded [ 6.344142] device-mapper: multipath service-time: version 0.3.0 loaded [ 6.351559] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 6.358410] device-mapper: raid: Loading target version 1.15.1 [ 6.366637] hid: raw HID events driver (C) Jiri Kosina [ 6.372857] drop_monitor: Initializing network drop monitor service [ 6.380383] NET: Registered PF_INET6 protocol family [ 6.387629] Segment Routing with IPv6 [ 6.392019] RPL Segment Routing with IPv6 [ 6.396878] In-situ OAM (IOAM) with IPv6 [ 6.401619] NET: Registered PF_PACKET protocol family [ 6.407690] Key type dns_resolver registered [ 6.413339] registered taskstats version 1 [ 6.418243] Loading compiled-in X.509 certificates [ 6.424895] zswap: loaded using pool lzo/zbud [ 6.430591] Key type ._fscrypt registered [ 6.435420] Key type .fscrypt registered [ 6.440067] Key type fscrypt-provisioning registered [ 6.451406] Key type big_key registered [ 6.487564] Key type encrypted registered [ 6.582368] "cryptomgr_test" (101) uses obsolete ecb(arc4) skcipher [ 11.469096] Freeing unused kernel image (initmem) memory: 1024K [ 11.494874] Checked W+X mappings: passed, no W+X pages found [ 11.501283] Run /init as init process [ 11.505718] with arguments: [ 11.505731] /init [ 11.505739] with environment: [ 11.505746] HOME=/ [ 11.505754] TERM=linux [ 23.079162] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 23.116627] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 25.784258] orion_wdt: Initial timeout 21 sec [ 26.154320] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 26.332626] marvell-cesa f1030000.crypto: CESA device successfully registered [ 27.544385] EXT4-fs (sda1): re-mounted. Quota mode: none. [ 28.824629] ksmbd: The ksmbd server is experimental, use at your own risk. [ 29.843422] random: dd: uninitialized urandom read (512 bytes read) [ 33.851995] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
root@debian:~# fw_printenv custom_params custom_params= root@debian:~# systemctl status System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down
|
Re: Need help with systemd using uEnv.txt June 23, 2022 05:05PM |
Admin Registered: 12 years ago Posts: 17,697 |
root@debian:~# fw_printenv custom_params custom_params=
Quote
[ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:0x100000@0x0(u-boot),-@0x100000(ubi) init=/bin/systemd
Quote
https://forum.doozan.com/read.php?2,12096
Note 5 (Optional):
To boot with systemd, add parameter init=/bin/systemd to your u-boot env bootargs (beware that in later Debian distribution, the location of systemd binary might have changed).
ls -l /bin/systemdIf it is not there, you need to find the new location.
|
Re: Need help with systemd using uEnv.txt June 23, 2022 05:21PM |
Registered: 1 year ago Posts: 28 |
root@debian:~# ls -l /bin/systemd lrwxrwxrwx 1 root root 20 Mar 20 12:55 /bin/systemd -> /lib/systemd/systemd
root@debian:~# cat /boot/uEnv.txt custom_params=init=/lib/systemd/systemd root@debian:~# systemctl status System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down
|
Re: Need help with systemd using uEnv.txt June 23, 2022 05:34PM |
Registered: 1 year ago Posts: 28 |
|
Re: Need help with systemd using uEnv.txt June 23, 2022 06:12PM |
Admin Registered: 12 years ago Posts: 17,697 |