Fabio
Goflexnet ethernet auto negotiation July 18, 2022 05:22AM |
Re: Goflexnet ethernet auto negotiation July 18, 2022 03:13PM |
Admin Registered: 13 years ago Posts: 18,821 |
~# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: on master-slave cfg: preferred slave master-slave status: slave Port: Twisted Pair PHYAD: 0 Transceiver: external MDI-X: Unknown Supports Wake-on: d Wake-on: d Link detected: yes
~# ifdown eth0 & ifup eth0 [1] 18258 ifup: waiting for lock on /run/network/ifstate.eth0 [1]+ Done ifdown eth0 ~#
~# myinfo Seagate GoFlex Net Linux version 5.18.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1.0 PREEMPT Fri Jun 24 15:26:02 PDT 2022 Debian 11.1
Fabio
Re: Goflexnet ethernet auto negotiation July 18, 2022 04:11PM |
~# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off master-slave cfg: preferred slave master-slave status: slave Port: Twisted Pair PHYAD: 0 Transceiver: external MDI-X: Unknown Supports Wake-on: d Wake-on: d Link detected: yes
Fabio
Re: Goflexnet ethernet auto negotiation July 18, 2022 04:18PM |
Fabio
Re: Goflexnet ethernet auto negotiation July 18, 2022 04:21PM |
Re: Goflexnet ethernet auto negotiation July 18, 2022 07:11PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Goflexnet ethernet auto negotiation July 18, 2022 08:45PM |
Admin Registered: 13 years ago Posts: 18,821 |
Auto-negotiation: on Advertised auto-negotiation: Yes
Fabio
Re: Goflexnet ethernet auto negotiation July 19, 2022 03:33AM |
.... Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes ....I think that the problem is kernel related as starting the machine with an old kernel installed on it (5.2.9) the problem go away.
Fabio
Re: Goflexnet ethernet auto negotiation July 19, 2022 03:38AM |