Problems booting Debian on 88f6283
Posted by gt
|
Problems booting Debian on 88f6283 November 01, 2022 10:14PM |
Registered: 1 year ago Posts: 22 |
Hi!
I am trying to upgrade an old vpn-box on 88f6283, but it only works with Squeeze it came with.
I followed great guide by bodhi, but the booting of new system fails because the dtb is nowhere to be found.
The u-boot is also stuck on obscure patched version from around 2010, and any attempt to replace it ends in usb+eth not showing, and only portion of 1gb ram visible.
At this moment I would be glad to boot anything supportable, and I have tried installing OpenWrt. The "factory" rootfs uses ubi, which bootloader cannot parse, and if I boot uImage (ro version of Openwrt), network interface fails to receive enything.
Are there any options to try?
Here are some links:
the device https://promwad.com/case-studies/ip-plug-mini-server and
patches from vendor on some forgotten ftp http://download.ak-s.com.ru/ip-plug/
I am trying to upgrade an old vpn-box on 88f6283, but it only works with Squeeze it came with.
I followed great guide by bodhi, but the booting of new system fails because the dtb is nowhere to be found.
The u-boot is also stuck on obscure patched version from around 2010, and any attempt to replace it ends in usb+eth not showing, and only portion of 1gb ram visible.
At this moment I would be glad to boot anything supportable, and I have tried installing OpenWrt. The "factory" rootfs uses ubi, which bootloader cannot parse, and if I boot uImage (ro version of Openwrt), network interface fails to receive enything.
Are there any options to try?
Here are some links:
the device https://promwad.com/case-studies/ip-plug-mini-server and
patches from vendor on some forgotten ftp http://download.ak-s.com.ru/ip-plug/
|
Re: Problems booting Debian on 88f6283 November 02, 2022 12:22AM |
Admin Registered: 13 years ago Posts: 18,543 |
gt,
Do you have serial console connected (if this box has serial header)?
The 88f6283 is a close cousin of the 88f6282. That would be the Zyxel NSA325. Try using the kirkwood-nsa325.dtb.
Also the Silverstore (kirkwood-silverstore-hncn2.dtb)
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 11/02/2022 12:27AM by bodhi.
Do you have serial console connected (if this box has serial header)?
Quote
I followed great guide by bodhi, but the booting of new system fails because the dtb is nowhere to be found.
The 88f6283 is a close cousin of the 88f6282. That would be the Zyxel NSA325. Try using the kirkwood-nsa325.dtb.
Also the Silverstore (kirkwood-silverstore-hncn2.dtb)
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 11/02/2022 12:27AM by bodhi.
|
Re: Problems booting Debian on 88f6283 November 02, 2022 08:24PM |
Registered: 9 years ago Posts: 442 |
The Marvelll 88F6283 is the low power version of the ARMADA 300/310 available operating at either 800MHz or 1GHz. Its the same processor as the Freecom SilverStore as bodhi suggested, so that dts might be a good starting point. An even closer example would be the Plat'Home OpenBlocksA7 (DTB file is kirkwood-openblocks_a7.dtb) as it has very similar features (i.e. 1GB RAM, 2x Gigabit Ethernet) as your device.
|
Re: Problems booting Debian on 88f6283 November 04, 2022 08:01PM |
Registered: 1 year ago Posts: 22 |
>Do you have serial console connected (if this box has serial header)?
Yes, I have connected terminal to UART
>Try Silverstore or OBa7 dtbs
Thanks for the advice!
That helped to make some progress!
I can see that the device boots to "Waiting for the rootfs device /dev/sda1" but then it stucks
I deleted the "rootwait" part of u-boot arguments and now it outputs the following: https://pastebin.com/haG9U1MM
Edited 1 time(s). Last edit at 11/04/2022 08:01PM by gt.
Yes, I have connected terminal to UART
>Try Silverstore or OBa7 dtbs
Thanks for the advice!
That helped to make some progress!
I can see that the device boots to "Waiting for the rootfs device /dev/sda1" but then it stucks
I deleted the "rootwait" part of u-boot arguments and now it outputs the following: https://pastebin.com/haG9U1MM
Edited 1 time(s). Last edit at 11/04/2022 08:01PM by gt.
|
Re: Problems booting Debian on 88f6283 November 04, 2022 09:17PM |
Admin Registered: 13 years ago Posts: 18,543 |
gt,
Try these 2 tests:
1. Use different USB port if this box has more than one USB port.
If that does not work,
2. Use Silverstore DTB
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Try these 2 tests:
1. Use different USB port if this box has more than one USB port.
If that does not work,
2. Use Silverstore DTB
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 05, 2022 08:41AM |
Registered: 1 year ago Posts: 22 |
|
Re: Problems booting Debian on 88f6283 November 05, 2022 01:33PM |
Admin Registered: 13 years ago Posts: 18,543 |
The problem is related to the USB drives/ports.
So basically the USB drive is not working in Linux. So no root device.
But this USB drive did work fine in u-boot. So the issue likely with DTB (DTS needs some definition for USB and USB regulator).
Sometime using another USB drive might solve the power problem.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
[ 12.405096][ T102] usb 1-1: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 0.00 [ 12.414052][ T102] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.422828][ T102] hub 1-1:1.0: USB hub found [ 12.427458][ T102] hub 1-1:1.0: 4 ports detected [ 12.744635][ T102] usb 1-1.3: new high-speed USB device number 3 using orion-ehci [ 12.900959][ T102] usb 1-1.3: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00 [ 12.910096][ T102] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 12.918194][ T102] usb 1-1.3: Product: DataTraveler 2.0 [ 12.923545][ T102] usb 1-1.3: Manufacturer: Kingston [ 12.928655][ T102] usb 1-1.3: SerialNumber: 000 [ 12.935601][ T102] usb 1-1.3: rejected 1 configuration due to insufficient available bus power [ 12.944360][ T102] usb 1-1.3: no configuration chosen from 1 choice
So basically the USB drive is not working in Linux. So no root device.
But this USB drive did work fine in u-boot. So the issue likely with DTB (DTS needs some definition for USB and USB regulator).
Sometime using another USB drive might solve the power problem.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 05, 2022 03:33PM |
Registered: 1 year ago Posts: 22 |
I tried another usb drive, same result.
Is there a kernel bootarg to ignore bus power warnings?
I've found this:
https://blog.famzah.net/2010/08/11/usb-rejected-1-configuration-due-to-insufficient-available-bus-power/
but unsure how to make kernel read it from u-boot bootargs
Is there a kernel bootarg to ignore bus power warnings?
I've found this:
https://blog.famzah.net/2010/08/11/usb-rejected-1-configuration-due-to-insufficient-available-bus-power/
but unsure how to make kernel read it from u-boot bootargs
|
Re: Problems booting Debian on 88f6283 November 05, 2022 07:11PM |
Registered: 1 year ago Posts: 22 |
I added "usbcore.authorized_default=1" after reading https://www.kernel.org/doc/html/v5.19/admin-guide/kernel-parameters.html, but it did no good
|
Re: Problems booting Debian on 88f6283 November 05, 2022 07:59PM |
Registered: 1 year ago Posts: 22 |
Also I found a USB-hub with external power supply.
Using it, I successfully booted to Debian USB! Yay!
But Ethernet ports are not working :( . They do register link, but fail to receive anything, just like OpenWRT images.
Is there a way to create dtb from a patch that makes workable kernel 3.1.1, from manufacturer's archives?
Using it, I successfully booted to Debian USB! Yay!
But Ethernet ports are not working :( . They do register link, but fail to receive anything, just like OpenWRT images.
Is there a way to create dtb from a patch that makes workable kernel 3.1.1, from manufacturer's archives?
|
Re: Problems booting Debian on 88f6283 November 05, 2022 08:17PM |
Registered: 9 years ago Posts: 442 |
|
Re: Problems booting Debian on 88f6283 November 05, 2022 08:28PM |
Admin Registered: 13 years ago Posts: 18,543 |
gt,
> Also I found a USB-hub with external power
> supply.
> Using it, I successfully booted to Debian USB!
> Yay!
Congrat!
> But Ethernet ports are not working :( . They do
> register link, but fail to receive anything, just
> like OpenWRT images.
Which DTB you are using?
> Is there a way to create dtb from a patch that
> makes workable kernel 3.1.1, from manufacturer's
> archives?
Yes, but it will take a bit or a lot of time, depending on the info you got. Changing the ethernet definition is not hard. The hard part is knowing the correct PHY address to change it to (the definition is in the DTS). If the stock patch is available, please post it here in attachment or upload it somewhere (i.e. pastebin).
===========
For now do:
Post the entire serial bootlog for the successful boot.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> Also I found a USB-hub with external power
> supply.
> Using it, I successfully booted to Debian USB!
> Yay!
Congrat!
> But Ethernet ports are not working :( . They do
> register link, but fail to receive anything, just
> like OpenWRT images.
Which DTB you are using?
> Is there a way to create dtb from a patch that
> makes workable kernel 3.1.1, from manufacturer's
> archives?
Yes, but it will take a bit or a lot of time, depending on the info you got. Changing the ethernet definition is not hard. The hard part is knowing the correct PHY address to change it to (the definition is in the DTS). If the stock patch is available, please post it here in attachment or upload it somewhere (i.e. pastebin).
===========
For now do:
Post the entire serial bootlog for the successful boot.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 12:58PM |
Registered: 1 year ago Posts: 22 |
>Which dtb file are you using? Have you tried each of the existing dtb files that support the 6283 SOC?
Yes I tried all of those. Results vary a little, some use LED properly, some blink "faliure", but work. Some show 1 eth, some both. But no network and no boot wothout usb hub.
>Which DTB you are using?
Mostly openblocks a7, it shows both eth
>Post the entire serial bootlog for the successful boot.
https://pastebin.com/8DYBF9yp
>If the stock patch is available, please post it here in attachment or upload it somewhere (i.e. pastebin).
In the attach
Yes I tried all of those. Results vary a little, some use LED properly, some blink "faliure", but work. Some show 1 eth, some both. But no network and no boot wothout usb hub.
>Which DTB you are using?
Mostly openblocks a7, it shows both eth
>Post the entire serial bootlog for the successful boot.
https://pastebin.com/8DYBF9yp
>If the stock patch is available, please post it here in attachment or upload it somewhere (i.e. pastebin).
In the attach
|
Re: Problems booting Debian on 88f6283 November 06, 2022 01:48PM |
Admin Registered: 13 years ago Posts: 18,543 |
gt,
Even though the network was detected, the network link was never active. And the USB power hub is needed to boot then there was no power to the USB port. Both of these problems most likely due to the DTS that's good for Openblock A7 but something is missing or wrong for your box.
Let me take a look at the patch.
BTW, what is the exact name and model of this box? is it IP-Plug, by PromWad or they made this for a client?
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Even though the network was detected, the network link was never active. And the USB power hub is needed to boot then there was no power to the USB port. Both of these problems most likely due to the DTS that's good for Openblock A7 but something is missing or wrong for your box.
Let me take a look at the patch.
BTW, what is the exact name and model of this box? is it IP-Plug, by PromWad or they made this for a client?
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 01:56PM |
Admin Registered: 13 years ago Posts: 18,543 |
Quote
BTW, what is the exact name and model of this box? is it IP-Plug, by PromWad or they made this for a client?
I see in the patch
+ * Promwad WTPlug Reference Board Setup
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 02:33PM |
Registered: 1 year ago Posts: 22 |
I actually fiddled with u-boot, followed OpenWrt guide to replacing it to most recent working one for Kirkwood. It boots the board, but does not see usb or network.
With stock u-boot I am able to read files from usb and use network upload. But it seems no support for UBI or ext4
So, maybe u-boot patch will be of some use (I think it is smaller than the kernel)
With stock u-boot I am able to read files from usb and use network upload. But it seems no support for UBI or ext4
So, maybe u-boot patch will be of some use (I think it is smaller than the kernel)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 03:39PM |
Admin Registered: 13 years ago Posts: 18,543 |
gt,
Try this attached DTB.
Power up, interrupt serial consolse and
And then boot the same way you did in the successful boot.
And please post the entire serial console log.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Try this attached DTB.
Power up, interrupt serial consolse and
printenv bdinfo ping <your router IP> # for example, 192.168.0.1
And then boot the same way you did in the successful boot.
And please post the entire serial console log.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 04:01PM |
Registered: 1 year ago Posts: 22 |
Wow! Your help was fast and on point!
eth0 worked inside debian, usb worked with hub ("[ 17.311402][ T1] Waiting for root device /dev/sda1..." when plugged directly)
Output log:
https://pastebin.com/wx3NbB7z
eth0 worked inside debian, usb worked with hub ("[ 17.311402][ T1] Waiting for root device /dev/sda1..." when plugged directly)
Output log:
https://pastebin.com/wx3NbB7z
|
Re: Problems booting Debian on 88f6283 November 06, 2022 04:35PM |
Admin Registered: 13 years ago Posts: 18,543 |
Quote
eth0 worked inside debian, usb worked with hub ("[ 17.311402][ T1] Waiting for root device /dev/sda1..." when plugged directly)
Cool!
It has Ethernet implementation only. I want to make sure that we got that out of the way. Please try Ethernet port 1, both scenarios:
1. Unplug port 0 and plug the cable to 2nd port while Debian is running.
2. Reboot, and verify ethernet port 1 work.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 04:47PM |
Registered: 1 year ago Posts: 22 |
|
Re: Problems booting Debian on 88f6283 November 06, 2022 05:05PM |
Admin Registered: 13 years ago Posts: 18,543 |
Cool!
USB is a bit harder. I could not guess the names they used in the patch. My guess is MPP45_GPIO but why the weird name!
Power up, interrupt serial console and
And then
Please post the log here.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
USB is a bit harder. I could not guess the names they used in the patch. My guess is MPP45_GPIO but why the weird name!
u-boot patch + MPP45_GPIO, /* USB_IND */ + MPP46_GPIO, /* USB_RS_IND */ + MPP47_GPIO, /* RST_GE */ + MPP48_GPIO, /* RST_USB */
Power up, interrupt serial console and
md.l 0xF1010000 8
And then
md.l 0xF1010100 1 md.l 0xF1010140 1 usb start md.l 0xF1010100 1 md.l 0xF1010140 1
Please post the log here.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 05:13PM |
Registered: 1 year ago Posts: 22 |
U-Boot 2011.06 (Feb 22 2012 - 04:24:47)
Promwad-PlugComputer
SoC: Kirkwood 88F6282_?? RevID 0x01
DRAM: 1 GiB
NAND: 1024 MiB
In: serial
Out: serial
Err: serial
Net: egiga0, egiga1
88E1121 Initialized on egiga0, devadr 1
88E1121 Initialized on egiga1, devadr 0
Hit any key to stop autoboot: 0
Marvell>> md.l 0xF1010000 8
f1010000: 01111111 00003300 33331100 33003333 .....3....3333.3
f1010010: 00000033 00000000 00000000 00000000 3...............
Marvell>> md.l 0xF1010100 1
f1010100: 00000000 ....
Marvell>> md.l 0xF1010140 1
f1010140: 00018000 ....
Marvell>> usb start
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Marvell>> md.l 0xF1010100 1
f1010100: 00000000 ....
Marvell>> md.l 0xF1010140 1
f1010140: 00018000 ....
Marvell>>
|
Re: Problems booting Debian on 88f6283 November 06, 2022 05:32PM |
Admin Registered: 13 years ago Posts: 18,543 |
MPP 47 48
So my guess is 48 for USB power. 47 is for Ethernet.
Will upload another DTB.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
+ MPP47_GPIO, /* RST_GE */ + MPP48_GPIO, /* RST_USB */
So my guess is 48 for USB power. 47 is for Ethernet.
Will upload another DTB.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 05:47PM |
Admin Registered: 13 years ago Posts: 18,543 |
This DTB has:
- Added USB power regulator
- Removed the DIP switches
Please try booting without USB hub.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
- Added USB power regulator
- Removed the DIP switches
Please try booting without USB hub.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 06, 2022 06:02PM |
Registered: 1 year ago Posts: 22 |
|
Re: Problems booting Debian on 88f6283 November 06, 2022 06:09PM |
Registered: 1 year ago Posts: 22 |
|
Re: Problems booting Debian on 88f6283 November 06, 2022 07:40PM |
Admin Registered: 13 years ago Posts: 18,543 |
> Surprisingly, it works correct with
> kirkwood-silverstore-hncn2.dtb.
It is a coinincidence :) without looking at those, I think they are the same GPIO numbers.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> kirkwood-silverstore-hncn2.dtb.
It is a coinincidence :) without looking at those, I think they are the same GPIO numbers.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 07, 2022 03:13PM |
Registered: 1 year ago Posts: 22 |
Well, I transferred rootfs to ubfs on mtd, it boots and works OK. Bodhi, thank you a lot!
If my bootenvs are of any use, I can post them here as well as nanddump of rootfs.
But in overall it was as easy as adding mtd table to bootenvs, formatting biggest device as ubi+ubifs and transferring your rootfs archive. Then writing uImage (manually patched with experimental wtplug.dtb) to other mtd and making sure that stock u-boot loads and boots of it.
Bodhi, is it ok to ask to tinker with dtb a little more? Usb devices are not powering up in linux, and led flashes red uncontrollably.
If my bootenvs are of any use, I can post them here as well as nanddump of rootfs.
But in overall it was as easy as adding mtd table to bootenvs, formatting biggest device as ubi+ubifs and transferring your rootfs archive. Then writing uImage (manually patched with experimental wtplug.dtb) to other mtd and making sure that stock u-boot loads and boots of it.
Bodhi, is it ok to ask to tinker with dtb a little more? Usb devices are not powering up in linux, and led flashes red uncontrollably.
|
Re: Problems booting Debian on 88f6283 November 07, 2022 08:46PM |
Admin Registered: 13 years ago Posts: 18,543 |
gt,
> Well, I transferred rootfs to ubfs on mtd, it
> boots and works OK.
Cool!
> Bodhi, is it ok to ask to tinker with dtb a little
> more? Usb devices are not powering up in linux,
> and led flashes red uncontrollably.
Sure. Let me modify and upload new DTB version.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> Well, I transferred rootfs to ubfs on mtd, it
> boots and works OK.
Cool!
> Bodhi, is it ok to ask to tinker with dtb a little
> more? Usb devices are not powering up in linux,
> and led flashes red uncontrollably.
Sure. Let me modify and upload new DTB version.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Problems booting Debian on 88f6283 November 08, 2022 02:43AM |
Admin Registered: 13 years ago Posts: 18,543 |
gt,
This DTB has:
- Use GPIO 45 for USB power. It seems odd that GPIO 48 did not work (u-boot use that to reset USB). But it's worth a try to see if 45 does anything.
- Status LEDs should work now with green LED and red LED. When Linux finishes booting it should become solid green.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
This DTB has:
- Use GPIO 45 for USB power. It seems odd that GPIO 48 did not work (u-boot use that to reset USB). But it's worth a try to see if 45 does anything.
- Status LEDs should work now with green LED and red LED. When Linux finishes booting it should become solid green.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
