[Solved] OX820 Pogplug Pro stops during booting from the kernel January 27, 2023 02:11PM |
Registered: 1 year ago Posts: 3 |
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 dwmac.40400000 Waiting for PHY auto negotiation to complete.. done Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.0.1 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.0.1 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.0.1 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.0.1 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.0.1 is alive Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Pogoplug V3 Pro [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f8 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 119028K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 12044K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b31f68 ( 200 kB) [ 0.000000] .bss : 0xc0b383b8 - 0xc0b757c0 ( 246 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16 [ 0.000015] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.008166] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.018895] timer_oxnas_rps: Registered clocksource rate 390625Hz [ 0.025052] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500 [ 0.033582] GIC: PPI13 is secure or misconfigured [ 0.038382] GIC: PPI13 is secure or misconfigured [ 0.043299] Console: colour dummy device 80x30 [ 0.047836] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.094786] pid_max: default: 32768 minimum: 301 [ 0.099735] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106414] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.114542] CPU: Testing write buffer coherency: ok [ 0.158535] Setting up static identity map for 0x60100000 - 0x60100038 [ 0.165347] Hierarchical SRCU implementation. [ 0.208435] smp: Bringing up secondary CPUs ... [ 0.258549] GIC: PPI13 is secure or misconfigured [ 0.318722] smp: Brought up 1 node, 2 CPUs [ 0.327646] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.334817] devtmpfs: initialized [ 0.343354] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.353295] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.359797] prandom: seed boundary self test passed [ 0.368965] prandom: 100 self tests passed [ 0.373127] pinctrl core: initialized pinctrl subsystem [ 0.379118] NET: Registered protocol family 16 [ 0.385192] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.394695] cpuidle: using governor ladder [ 0.398988] cpuidle: using governor menu [ 0.421258] vgaarb: loaded [ 0.424509] SCSI subsystem initialized [ 0.429186] usbcore: registered new interface driver usbfs [ 0.434805] usbcore: registered new interface driver hub [ 0.440414] usbcore: registered new device driver usb [ 0.445713] pps_core: LinuxPPS API ver. 1 registered [ 0.450800] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.460055] PTP clock support registered [ 0.465080] clocksource: Switched to clocksource oxnas_rps_clocksource_timer [ 0.490662] NET: Registered protocol family 2 [ 0.496038] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.503078] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.509570] TCP: Hash tables configured (established 1024 bind 1024) [ 0.516167] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.522088] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.528724] NET: Registered protocol family 1 [ 0.533962] RPC: Registered named UNIX socket transport module. [ 0.540001] RPC: Registered udp transport module. [ 0.544768] RPC: Registered tcp transport module. [ 0.549573] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.557637] Initialise system trusted keyrings [ 0.562188] Key type blacklist registered [ 0.566627] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.580057] zbud: loaded [ 0.587351] NFS: Registering the id_resolver key type [ 0.592494] Key type id_resolver registered [ 0.596830] Key type id_legacy registered [ 0.600926] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.607723] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.615037] fuse init (API version 7.26) [ 0.620006] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.626813] orangefs_init: module version upstream loaded [ 2.580185] Key type asymmetric registered [ 2.584358] Asymmetric key parser 'x509' registered [ 2.589452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.596956] io scheduler noop registered [ 2.600944] io scheduler deadline registered [ 2.605409] io scheduler cfq registered (default) [ 2.612367] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 2.620305] console [ttyS0] disabled [ 2.624074] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 2.633049] console [ttyS0] enabled [ 2.633049] console [ttyS0] enabled [ 2.640117] bootconsole [earlycon0] disabled [ 2.640117] bootconsole [earlycon0] disabled [ 2.659504] loop: module loaded [ 2.664381] scsi host0: sata_oxnas [ 2.668136] ata1: SATA max UDMA/133 irq 57 [ 2.672330] sata_oxnas: resetting SATA core [ 2.735429] nand: Could not find valid ONFI parameter page; aborting [ 2.741767] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 2.748136] nand: Hynix NAND 128MiB 3,3V 8-bit [ 2.752563] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.760140] Scanning device for bad blocks [ 2.846556] 2 ofpart partitions found on MTD device 41000000.nand-controller [ 2.853573] Creating 2 MTD partitions on "41000000.nand-controller": [ 2.859937] 0x000000000000-0x000000e00000 : "boot" [ 2.866403] 0x000000e00000-0x000008000000 : "data" [ 2.874296] libphy: Fixed MDIO Bus: probed [ 2.878873] oxnas-dwmac 40400000.ethernet: PTP uses main clock [ 2.884695] oxnas-dwmac 40400000.ethernet: no reset control found [ 2.955184] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 2.960227] oxnas-dwmac 40400000.ethernet: Ring mode enabled [ 2.965913] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported [ 2.973194] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors [ 2.979980] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors [ 2.986590] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported [ 2.993871] oxnas-dwmac 40400000.ethernet: COE Type 2 [ 2.998929] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported [ 3.005806] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported [ 3.012062] oxnas-dwmac 40400000.ethernet (unnamed net_device) (uninitialized): device MAC address 3e:62:45:8a:1c:e7 [ 3.017008] ata1: SATA link down (SStatus 0 SControl 310) [ 3.022568] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.045132] libphy: stmmac: probed [ 3.048542] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 3.058030] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL) [ 3.068416] PPP generic driver version 2.4.2 [ 3.072952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.079549] ehci-pci: EHCI PCI platform driver [ 3.285143] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 3.290657] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 3.298524] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100 [ 3.325145] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 3.331466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.338286] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.345512] usb usb1: Product: EHCI Host Controller [ 3.350369] usb usb1: Manufacturer: Linux 4.14.180-oxnas-tld-1 ehci_hcd [ 3.356989] usb usb1: SerialNumber: 40200100.ehci [ 3.362529] hub 1-0:1.0: USB hub found [ 3.366389] hub 1-0:1.0: 2 ports detected [ 3.371379] usbcore: registered new interface driver cdc_wdm [ 3.377221] usbcore: registered new interface driver usb-storage [ 3.383331] usbcore: registered new interface driver usbserial [ 3.389242] usbcore: registered new interface driver usbserial_generic [ 3.395863] usbserial: USB Serial support registered for generic [ 3.402196] mousedev: PS/2 mouse device common for all mice [ 3.407918] i2c /dev entries driver [ 3.412605] hidraw: raw HID events driver (C) Jiri Kosina [ 3.418250] usbcore: registered new interface driver usbhid [ 3.423797] usbhid: USB HID core driver [ 3.428902] NET: Registered protocol family 10 [ 3.434752] Segment Routing with IPv6 [ 3.438597] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.446274] NET: Registered protocol family 17 [ 3.450818] Key type dns_resolver registered [ 3.456404] registered taskstats version 1 [ 3.460487] Loading compiled-in X.509 certificates [ 3.465405] zswap: loaded using pool lzo/zbud [ 3.477739] Key type big_key registered [ 3.484103] Key type encrypted registered
[ 3.734958] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5 [ 3.742430] oxnas-pcie 47c00000.pcie-controller: link up [ 3.748226] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00 ...
OX820> printenv bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide disks=0 1 2 3 dtb_file=/boot/dts/ox820-pogoplug-pro.dtb ethact=dwmac.40400000 ethaddr=52:3b:20:9c:11:51 if_netconsole=ping $serverip ipaddr=192.168.0.88 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage mainlineLinux=yes mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) nc_ready=0 preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.1 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_custom_params=zswap.enabled=1 usb_ready_retry=15 Environment size: 2755/131068 bytes OX820> bdinfo arch_number = 0x00000480 boot_params = 0x60000100 DRAM bank = 0x00000000 -> start = 0x60000000 -> size = 0x08000000 eth0name = dwmac.40400000 ethaddr = 52:3b:20:9c:11:51 current eth = dwmac.40400000 ip_addr = 192.168.0.88 baudrate = 115200 bps TLB addr = 0x67FF0000 relocaddr = 0x67F28000 reloc off = 0x03F28000 irq_sp = 0x67E27EF0 sp start = 0x67E27EE0 OX820>
Re: OX820 Pogplug Pro stops during booting from the kernel January 27, 2023 03:26PM |
Admin Registered: 13 years ago Posts: 18,821 |
cd /media/sdb1/boot echo "dtb_file=/boot/dts/ox820-pogoplug-classic.dtb" > uEnv.txt sync
Re: OX820 Pogplug Pro stops during booting from the kernel January 30, 2023 01:47PM |
Registered: 1 year ago Posts: 3 |
OX820> printenv bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide disks=0 1 2 3 dtb_file=/boot/dts/ox820-pogoplug-classic.dtb ethact=dwmac.40400000 ethaddr=52:3b:20:9c:11:51 if_netconsole=ping $serverip ipaddr=192.168.0.88 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage mainlineLinux=yes mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) nc_ready=0 preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.1 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_custom_params=zswap.enabled=1 usb_ready_retry=15 Environment size: 2759/131068 bytes OX820>
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 ... starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Reset IDE: SATA PHY not ready for device 0 ide_preinit failed Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 60086272 0114e8ac-01 83 loading envs from usb 0 ... 1887 bytes read in 237 ms (6.8 KiB/s) no IDE devices available importing envs ... running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 200 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 4609480 bytes read in 353 ms (12.5 MiB/s) loading uInitrd ... 6464907 bytes read in 451 ms (13.7 MiB/s) loading DTB /boot/dts/ox820-pogoplug-classic.dtb ... 8892 bytes read in 183 ms (46.9 KiB/s) ## Booting kernel from Legacy Image at 60500000 ... Image Name: Linux-4.14.180-oxnas-tld-1 Created: 1970-01-01 1:17:27 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4609416 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 60e00000 ... Image Name: initramfs-4.14.180-oxnas-tld-1 Created: 2020-05-15 3:58:49 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6464843 Bytes = 6.2 MiB Load Address: 60000000 Entry Point: 60000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 62c00000 Booting using the fdt blob at 0x62c00000 Loading Kernel Image ... OK Loading Ramdisk to 677fc000, end 67e2654b ... OK Loading Device Tree to 677f6000, end 677fb2bb ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Pogoplug V3 Pro [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f8 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 119028K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 12044K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b31f68 ( 200 kB) [ 0.000000] .bss : 0xc0b383b8 - 0xc0b757c0 ( 246 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16 [ 0.000015] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.008163] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.018892] timer_oxnas_rps: Registered clocksource rate 390625Hz [ 0.025052] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500 [ 0.033579] GIC: PPI13 is secure or misconfigured [ 0.038382] GIC: PPI13 is secure or misconfigured [ 0.043297] Console: colour dummy device 80x30 [ 0.047833] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.094784] pid_max: default: 32768 minimum: 301 [ 0.099735] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106411] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.114534] CPU: Testing write buffer coherency: ok [ 0.158535] Setting up static identity map for 0x60100000 - 0x60100038 [ 0.165352] Hierarchical SRCU implementation. [ 0.208440] smp: Bringing up secondary CPUs ... [ 0.258547] GIC: PPI13 is secure or misconfigured [ 0.318727] smp: Brought up 1 node, 2 CPUs [ 0.327659] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.334830] devtmpfs: initialized [ 0.343229] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.353172] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.359674] prandom: seed boundary self test passed [ 0.368839] prandom: 100 self tests passed [ 0.373004] pinctrl core: initialized pinctrl subsystem [ 0.379002] NET: Registered protocol family 16 [ 0.385082] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.394347] cpuidle: using governor ladder [ 0.398643] cpuidle: using governor menu [ 0.421416] vgaarb: loaded [ 0.424668] SCSI subsystem initialized [ 0.429288] usbcore: registered new interface driver usbfs [ 0.434905] usbcore: registered new interface driver hub [ 0.440519] usbcore: registered new device driver usb [ 0.445816] pps_core: LinuxPPS API ver. 1 registered [ 0.450908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.460154] PTP clock support registered [ 0.465162] clocksource: Switched to clocksource oxnas_rps_clocksource_timer [ 0.490178] NET: Registered protocol family 2 [ 0.495559] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.502599] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.509086] TCP: Hash tables configured (established 1024 bind 1024) [ 0.515688] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.521612] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.528271] NET: Registered protocol family 1 [ 0.533501] RPC: Registered named UNIX socket transport module. [ 0.539540] RPC: Registered udp transport module. [ 0.544307] RPC: Registered tcp transport module. [ 0.549104] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.557171] Initialise system trusted keyrings [ 0.561725] Key type blacklist registered [ 0.566164] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.580638] zbud: loaded [ 0.588229] NFS: Registering the id_resolver key type [ 0.593372] Key type id_resolver registered [ 0.597696] Key type id_legacy registered [ 0.601789] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.608591] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.615956] fuse init (API version 7.26) [ 0.620956] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.627773] orangefs_init: module version upstream loaded [ 2.582725] Key type asymmetric registered [ 2.586959] Asymmetric key parser 'x509' registered [ 2.591989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.599493] io scheduler noop registered [ 2.603481] io scheduler deadline registered [ 2.607941] io scheduler cfq registered (default) [ 2.614886] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 2.622883] console [ttyS0] disabled [ 2.626741] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 2.635696] console [ttyS0] enabled [ 2.635696] console [ttyS0] enabled [ 2.642713] bootconsole [earlycon0] disabled [ 2.642713] bootconsole [earlycon0] disabled [ 2.662013] loop: module loaded [ 2.667002] scsi host0: sata_oxnas [ 2.670714] ata1: SATA max UDMA/133 irq 57 [ 2.674890] sata_oxnas: resetting SATA core [ 2.735511] nand: Could not find valid ONFI parameter page; aborting [ 2.741844] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 2.748213] nand: Hynix NAND 128MiB 3,3V 8-bit [ 2.752640] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.760217] Scanning device for bad blocks [ 2.846597] 2 ofpart partitions found on MTD device 41000000.nand-controller [ 2.853611] Creating 2 MTD partitions on "41000000.nand-controller": [ 2.859975] 0x000000000000-0x000000e00000 : "boot" [ 2.866508] 0x000000e00000-0x000008000000 : "data" [ 2.874467] libphy: Fixed MDIO Bus: probed [ 2.879029] oxnas-dwmac 40400000.ethernet: PTP uses main clock [ 2.884848] oxnas-dwmac 40400000.ethernet: no reset control found [ 2.955266] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 2.960307] oxnas-dwmac 40400000.ethernet: Ring mode enabled [ 2.965992] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported [ 2.973271] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors [ 2.980055] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors [ 2.986664] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported [ 2.993940] oxnas-dwmac 40400000.ethernet: COE Type 2 [ 2.998993] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported [ 3.005867] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported [ 3.012119] oxnas-dwmac 40400000.ethernet (unnamed net_device) (uninitialized): device MAC address 26:a9:5b:c0:8d:ce [ 3.017034] ata1: SATA link down (SStatus 0 SControl 310) [ 3.022620] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.045112] libphy: stmmac: probed [ 3.048616] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 3.058109] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL) [ 3.068574] PPP generic driver version 2.4.2 [ 3.073121] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.079710] ehci-pci: EHCI PCI platform driver [ 3.285224] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 3.290736] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 3.298606] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100 [ 3.325232] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 3.331558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.338375] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.345597] usb usb1: Product: EHCI Host Controller [ 3.350453] usb usb1: Manufacturer: Linux 4.14.180-oxnas-tld-1 ehci_hcd [ 3.357063] usb usb1: SerialNumber: 40200100.ehci [ 3.362590] hub 1-0:1.0: USB hub found [ 3.366448] hub 1-0:1.0: 2 ports detected [ 3.371407] usbcore: registered new interface driver cdc_wdm [ 3.377249] usbcore: registered new interface driver usb-storage [ 3.383357] usbcore: registered new interface driver usbserial [ 3.389265] usbcore: registered new interface driver usbserial_generic [ 3.395886] usbserial: USB Serial support registered for generic [ 3.402216] mousedev: PS/2 mouse device common for all mice [ 3.407941] i2c /dev entries driver [ 3.412600] hidraw: raw HID events driver (C) Jiri Kosina [ 3.418252] usbcore: registered new interface driver usbhid [ 3.423800] usbhid: USB HID core driver [ 3.428945] NET: Registered protocol family 10 [ 3.434762] Segment Routing with IPv6 [ 3.438612] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.446228] NET: Registered protocol family 17 [ 3.450767] Key type dns_resolver registered [ 3.456320] registered taskstats version 1 [ 3.460403] Loading compiled-in X.509 certificates [ 3.465313] zswap: loaded using pool lzo/zbud [ 3.477893] Key type big_key registered [ 3.484236] Key type encrypted registered
Re: OX820 Pogplug Pro stops during booting from the kernel January 30, 2023 03:01PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
4. Create uImage with embedded DTB for booting with stock u-boot. Skip this step if you have installed the latest released uboot for OXNAS, or are installing this u-boot at the same time.
- If you have the Pogo V3 Classic (without Wifi), then the DTB name below should be ox820-pogoplug-classic.dtb (see below for the list of OX820 DTBs).
cd /media/sdb1/boot
cp -a uImage uImage.orig
cp -a zImage-4.14.180-oxnas-tld-1 zImage.fdt
cat dts/ox820-pogoplug-pro.dtb >> zImage.fdt
mkimage -A arm -O linux -C none -T kernel -a 0x60008000 -e 0x60008000 -n 'Linux-4.14.180-oxnas-tld-1' -d zImage.fdt uImage
sync
cp -a uImage.orig uImage sync
Re: OX820 Pogplug Pro stops during booting from the kernel February 06, 2023 10:17AM |
Registered: 1 year ago Posts: 3 |
Re: OX820 Pogplug Pro stops during booting from the kernel February 06, 2023 03:03PM |
Admin Registered: 13 years ago Posts: 18,821 |