Forum List Message List New Topic
pczerepaniak
Wake On Lan on Netgear NAS RN102
January 22, 2024 04:48PM
Hi, i try to get wake on lan working on RN102 with debian.

I am setting on wake on lan with:

ethtool -s eht0/end1 wol g

Howver after i do poweroff and call wakeonlan <mac> nothing is happening.

I tried do this on clean debian bookworm with 6.1 debian kernel, 6.5.7-mvebu-370xp-tld-1 kernel, openwrt with same results - after poweroff command wakeonlan is not working.

only version when it is working is original Netgear ReadyNAS OS.

Please help

Kind regards!

Przemek
Reply Quote
rayknight
Re: Wake On Lan on Netgear NAS RN102
January 23, 2024 05:26PM
pczerepaniak Wrote:
-------------------------------------------------------
> Hi, i try to get wake on lan working on RN102 with
> debian.
>
> I am setting on wake on lan with:
>
> ethtool -s eht0/end1 wol g
>
Likely not the issue, but you do have a typo in the above line. It should be:

ethtool -s eth0 wol g
Reply Quote
pczerepaniak
Re: Wake On Lan on Netgear NAS RN102
January 24, 2024 01:54AM
on newest kernel ethernet device changed its name from eth0 to end1, thats why i wrote eth0/end1. Yes it is a typo
Reply Quote
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: