|
kiro
Pogoplug Pogo-E02 can't flash Uboot June 06, 2024 02:22AM |
cd /tmp wget http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh chmod +x install_uboot_mtd0.sh ./install_uboot_mtd0.sh
kwboot -t -B 115200 /dev/ttyUSB0 -b /tmp/uboot.2017.07-tld-1.pogo_e02.mtd0 -p
|
Re: Pogoplug Pogo-E02 can't flash Uboot June 06, 2024 12:59PM |
Admin Registered: 13 years ago Posts: 18,800 |
Quote
Kirkwood plugs
Basic steps to install Debian and new u-boot on Kirkwood boxes
Boot Kirkwood rootfs with stock u-boot
Latest Linux Kirkwood kernel and rootfs
Latest Kirkwood u-boots
|
Kiro
Re: Pogoplug Pogo-E02 can't flash Uboot June 07, 2024 02:35AM |
fdisk /dev/sdb mke2fs -j /dev/sdb1
cd /media/sdb1 tar xjf Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2
cd /media/sdb1/boot cp -a zImage-6.5.7-kirkwood-tld-1 zImage.fdt cat dts/kirkwood-pogo_e02.dtb >> zImage.fdt mv uImage uImage.orig mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-6.5.7-kirkwood-tld-1 -d zImage.fdt uImage sync
setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' setenv load_uimage 'ext2load usb 0:1 0x800000 /boot/uImage' setenv load_uinitrd 'ext2load usb 0:1 0x2100000 /boot/uInitrd' setenv usb_boot 'mw 0x800000 0 1; run load_uimage; run load_uinitrd; bootm 0x800000 0x2100000' setenv usb_bootcmd 'run usb_set_bootargs; run usb_boot' setenv bootcmd 'usb reset; run usb_bootcmd; usb stop; reset'
|
Re: Pogoplug Pogo-E02 can't flash Uboot June 07, 2024 02:02PM |
Admin Registered: 13 years ago Posts: 18,800 |
su -
> fdisk /dev/sdb > mke2fs -j /dev/sdb1 >>
> cd /media/sdb1 > tar xjf > Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2 >>
> cd /media/sdb1/boot > cp -a zImage-6.5.7-kirkwood-tld-1 zImage.fdt > cat dts/kirkwood-pogo_e02.dtb >> zImage.fdt > mv uImage uImage.orig > mkimage -A arm -O linux -T kernel -C none -a > 0x00008000 -e 0x00008000 -n > Linux-6.5.7-kirkwood-tld-1 -d zImage.fdt uImage > sync >>
> setenv usb_set_bootargs 'setenv bootargs > console=ttyS0,115200 root=LABEL=rootfs > rootdelay=10 earlyprintk=serial' > setenv load_uimage 'ext2load usb 0:1 0x800000 > /boot/uImage' > setenv load_uinitrd 'ext2load usb 0:1 0x2100000 > /boot/uInitrd' > setenv usb_boot 'mw 0x800000 0 1; run load_uimage; > run load_uinitrd; bootm 0x800000 0x2100000' > setenv usb_bootcmd 'run usb_set_bootargs; run > usb_boot' > setenv bootcmd 'usb reset; run usb_bootcmd; usb > stop; reset' >>
boot
setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' setenv load_uimage 'ext2load usb 0:1 0x800000 /boot/uImage' setenv load_uinitrd 'ext2load usb 0:1 0x2100000 /boot/uInitrd' setenv usb_boot 'mw 0x800000 0 1; run load_uimage; run load_uinitrd; bootm 0x800000 0x2100000' setenv usb_bootcmd 'run usb_set_bootargs; run usb_boot' setenv bootcmd 'usb reset; run usb_bootcmd; usb stop; reset'
saveenv
boot
|
Kiro
Re: Pogoplug Pogo-E02 can't flash Uboot June 07, 2024 02:54PM |
setenv eth1addr 00:00:00:00:00 setenv ipaddr 192.168.1.33 setenv serverip 192.168.1.20 setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' mw 0x800000 0 1 tftpboot 0x800000 uImage tftpboot 0x2100000 uInitrd printenv bootm 0x800000 0x2100000
|
Kiro
Re: Pogoplug Pogo-E02 can't flash Uboot June 07, 2024 03:08PM |
Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM Total size 256MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB CPU : Marvell Feroceon (Rev 1) CLOUD ENGINES BOARD: PPV2 Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 CE>> CE>> setenv eth1addr 00:25:31:00:59:30setenv eth1addr 00:25:31:00:59:30 CE>> saveenvsaveenv Saving Environment to NAND... Erasing Nand...Writing to Nand... done CE>> setenv ipaddr 192.168.1.55setenv ipaddr 192.168.1.55 CE>> setenv serverip 192.168.1.13setenv serverip 192.168.1.13 CE>> setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial'setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' CE>> mw 0x800000 0 1mw 0x800000 0 1 CE>> tftpboot 0x800000 uImagetftpboot 0x800000 uImage Using egiga0 device TFTP from server 192.168.1.13; our IP address is 192.168.1.55 Filename 'uImage'. Load address: 0x800000 Loading: ##T ############################################################### ################T ################################################## ################################################################# ################################################################# ################################################################# #####################################T ############################ ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##############################################################T #### ################################################################# ################################################################# ################################################################# ################################################ done Bytes transferred = 6235609 (5f25d9 hex) CE>> tftpboot 0x2100000 uInitrdtftpboot 0x2100000 uInitrd Using egiga0 device TFTP from server 192.168.1.13; our IP address is 192.168.1.55 Filename 'uInitrd'. Load address: 0x2100000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################T ########################################### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################### done Bytes transferred = 5791271 (585e27 hex) CE>> printenvprintenv baudrate=115200 loads_echo=0 rootpath=/mnt/ARM_FS/ run_diag=yes console=console=ttyS0,115200 CASset=min MALLOC_len=1 ethprime=egiga0 bootargs_root=root=/dev/mtdblock2 ro ethmtu=1500 usb0Mode=host nandEcc=1bit ethact=egiga0 ethaddr=00:25:31:00:59:30 cesvcid=3NCGF8MP4JY32XUS36N742CHBN ceboardver=PPV2 bootcmd=nand read.e 0x800000 0x100000 0x200000; setenv bootargs $(console) $(bootargs_root);bootm 0x800000 stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no bootdelay=3 disaMvPnp=no eth1addr=00:25:31:00:59:30 bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial filesize=585e27 fileaddr=2100000 netmask=255.255.0.0 ipaddr=192.168.1.55 serverip=192.168.1.13 Environment size: 867/131068 bytes CE>> bootm 0x800000 0x2100000bootm 0x800000 0x2100000 ## Booting image at 00800000 ... Image Name: Linux-6.5.7-kirkwood-tld-1 Created: 2024-06-07 17:28:43 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6235545 Bytes = 5.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02100000 ... Image Name: initramfs-6.5.7-kirkwood-tld-1 Created: 2023-10-31 22:53:55 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 5791207 Bytes = 5.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.5.7-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #2 PREEMPT Wed Oct 18 21:14:11 PDT 2023 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Seagate GoFlex Net [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial [ 0.000000][ T0] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 232348K/262144K available (12288K kernel code, 1755K rwdata, 5416K rodata, 1024K init, 301K bss, 29796K reserved, 0K cma-reserved) [ 0.000000][ T0] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.008531][ T0] Switching to timer-based delay loop, resolution 5ns [ 0.015698][ T0] Console: colour dummy device 80x30 [ 0.020932][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.032174][ T0] CPU: Testing write buffer coherency: ok [ 0.037862][ T0] pid_max: default: 32768 minimum: 301 [ 0.052046][ T0] LSM: initializing lsm=capability,integrity [ 0.060311][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.068319][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.089104][ T1] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.097173][ T1] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.105900][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.113154][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2 [ 0.119405][ T1] rcu: Hierarchical SRCU implementation. [ 0.124893][ T1] rcu: Max phase no-delay instances is 1000. [ 0.133768][ T1] devtmpfs: initialized [ 0.147891][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.158600][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.168964][ T1] prandom: seed boundary self test passed [ 0.179076][ T1] prandom: 100 self tests passed [ 0.183864][ T1] pinctrl core: initialized pinctrl subsystem [ 0.193535][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.201729][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.214700][ T1] audit: initializing netlink subsys (disabled) [ 0.222800][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.223007][ T1] cpuidle: using governor ladder [ 0.234545][ T19] audit: type=2000 audit(0.210:1): state=initialized audit_enabled=0 res=1 [ 0.243101][ T1] cpuidle: using governor menu [ 0.248339][ T1] Feroceon L2: Enabling L2 [ 0.252673][ T1] Feroceon L2: Cache support initialised. [ 0.268677][ T1] No ATAGs? [ 0.638548][ T1] raid6: int32x8 gen() 108 MB/s [ 0.978548][ T1] raid6: int32x4 gen() 104 MB/s [ 1.318574][ T1] raid6: int32x2 gen() 132 MB/s [ 1.658548][ T1] raid6: int32x1 gen() 98 MB/s [ 1.663502][ T1] raid6: using algorithm int32x2 gen() 132 MB/s [ 2.018548][ T1] raid6: .... xor() 83 MB/s, rmw enabled [ 2.024024][ T1] raid6: using intx1 recovery algorithm [ 2.040265][ T1] SCSI subsystem initialized [ 2.049112][ T1] usbcore: registered new interface driver usbfs [ 2.055382][ T1] usbcore: registered new interface driver hub [ 2.078619][ T1] usbcore: registered new device driver usb [ 2.084748][ T1] pps_core: LinuxPPS API ver. 1 registered [ 2.098613][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.108448][ T1] PTP clock support registered [ 2.140987][ T1] vgaarb: loaded [ 2.145236][ T1] clocksource: Switched to clocksource orion_clocksource [ 2.164618][ T1] VFS: Disk quotas dquot_6.6.0 [ 2.185692][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.233384][ T1] NET: Registered PF_INET protocol family [ 2.245607][ T1] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.266472][ T1] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.285490][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.293927][ T1] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.315295][ T1] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.323149][ T1] TCP: Hash tables configured (established 2048 bind 2048) [ 2.345974][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear) [ 2.354106][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.385283][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.393813][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.416334][ T1] RPC: Registered named UNIX socket transport module. [ 2.422932][ T1] RPC: Registered udp transport module. [ 2.435263][ T1] RPC: Registered tcp transport module. [ 2.440644][ T1] RPC: Registered tcp-with-tls transport module. [ 2.455257][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.462380][ T1] PCI: CLS 0 bytes, default 32 [ 2.488301][ T10] Trying to unpack rootfs image as initramfs... [ 3.489084][ T10] Freeing initrd memory: 5656K [ 4.369456][ T1] Initialise system trusted keyrings [ 4.374695][ T1] Key type blacklist registered [ 4.380997][ T1] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 4.388390][ T1] zbud: loaded [ 4.411017][ T1] NFS: Registering the id_resolver key type [ 4.416877][ T1] Key type id_resolver registered [ 4.421745][ T1] Key type id_legacy registered [ 4.426648][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.434034][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.443756][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 4.452406][ T1] fuse: init (API version 7.38) [ 4.458619][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 4.466156][ T1] orangefs_init: module version upstream loaded [ 4.472638][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled [ 4.694512][ T1] xor: measuring software checksum speed [ 4.708893][ T1] arm4regs : 1112 MB/sec [ 4.728698][ T1] 8regs : 667 MB/sec [ 4.744137][ T1] 32regs : 947 MB/sec [ 4.749193][ T1] xor: using function: arm4regs (1112 MB/sec) [ 4.755100][ T1] async_tx: api initialized (async) [ 4.760161][ T1] Key type asymmetric registered [ 4.764935][ T1] Asymmetric key parser 'x509' registered [ 4.823074][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 4.831848][ T1] io scheduler bfq registered [ 5.026720][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 5.036507][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 5.047516][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 5.058754][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 5.127960][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 5.140926][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 5.207960][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 5.221359][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.231235][ T1] printk: console [ttyS0] disabled [ 5.236981][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A [ 5.246729][ T1] printk: console [ttyS0] enabled [ 5.246729][ T1] printk: console [ttyS0] enabled [ 5.256575][ T1] printk: bootconsole [earlycon0] disabled [ 5.256575][ T1] printk: bootconsole [earlycon0] disabled [ 5.299585][ T1] loop: module loaded [ 5.304588][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 5.315439][ T1] scsi host0: sata_mv [ 5.320963][ T1] scsi host1: sata_mv [ 5.325354][ T1] ata1: SATA max UDMA/133 irq 28 [ 5.330180][ T1] ata2: SATA max UDMA/133 irq 28 [ 5.336418][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 5.343520][ T1] nand: Hynix NAND 128MiB 3,3V 8-bit [ 5.348730][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 5.357098][ T1] Scanning device for bad blocks [ 5.471354][ T1] 4 fixed-partitions partitions found on MTD device orion_nand [ 5.478824][ T1] Creating 4 MTD partitions on "orion_nand": [ 5.484701][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 5.491257][ T1] 0x000000100000-0x000000500000 : "uImage" [ 5.497818][ T1] 0x000000500000-0x000002500000 : "pogoplug" [ 5.504718][ T1] 0x000002500000-0x00000fd00000 : "root" [ 5.510279][ T1] mtd: partition "root" extends beyond the end of device "orion_nand" -- size truncated to 0x5b00000 [ 5.523040][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 5.531657][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 5.569781][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.668749][ T52] ata1: SATA link down (SStatus 0 SControl F300) [ 6.016893][ T54] ata2: SATA link down (SStatus 0 SControl F300) [ 6.316725][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:00:59:30 [ 6.326951][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 6.333212][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 6.341908][ T1] orion-ehci f1050000.ehci: irq 31, io mem 0xf1050000 [ 6.375271][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 6.382365][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 6.391415][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.399404][ T1] usb usb1: Product: EHCI Host Controller [ 6.405015][ T1] usb usb1: Manufacturer: Linux 6.5.7-kirkwood-tld-1 ehci_hcd [ 6.412388][ T1] usb usb1: SerialNumber: f1050000.ehci [ 6.418978][ T1] hub 1-0:1.0: USB hub found [ 6.423504][ T1] hub 1-0:1.0: 1 port detected [ 6.429299][ T1] usbcore: registered new interface driver usb-storage [ 6.436792][ T1] mousedev: PS/2 mouse device common for all mice [ 6.715279][ T49] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.917041][ T49] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 6.926015][ T49] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.933920][ T49] usb 1-1: Product: USB2.0 Hub [ 6.939749][ T49] hub 1-1:1.0: USB hub found [ 6.944542][ T49] hub 1-1:1.0: 4 ports detected [ 7.265269][ T49] usb 1-1.1: new high-speed USB device number 3 using orion-ehci [ 7.416418][ T49] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 2.01 [ 7.425566][ T49] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.433644][ T49] usb 1-1.1: Product: Cruzer Blade [ 7.438663][ T49] usb 1-1.1: Manufacturer: SanDisk [ 7.443663][ T49] usb 1-1.1: SerialNumber: 4C532000030511105363 [ 7.450910][ T49] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 7.457993][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 7.464408][ T1] i2c_dev: i2c /dev entries driver [ 7.470334][ T49] scsi host2: usb-storage 1-1.1:1.0 [ 7.477730][ T1] device-mapper: uevent: version 1.0.3 [ 7.483768][ T1] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 7.493645][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 7.500998][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 7.508386][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 7.515833][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 7.526521][ T1] ledtrig-cpu: registered to indicate activity on CPUs [ 7.533438][ T1] hid: raw HID events driver (C) Jiri Kosina [ 7.539873][ T1] drop_monitor: Initializing network drop monitor service [ 7.548500][ T1] NET: Registered PF_INET6 protocol family [ 7.556399][ T1] Segment Routing with IPv6 [ 7.560789][ T1] RPL Segment Routing with IPv6 [ 7.565694][ T1] In-situ OAM (IOAM) with IPv6 [ 7.570468][ T1] NET: Registered PF_PACKET protocol family [ 7.576710][ T1] Key type dns_resolver registered [ 7.602267][ T1] registered taskstats version 1 [ 7.607510][ T1] Loading compiled-in X.509 certificates [ 7.636611][ T1] Key type .fscrypt registered [ 7.641278][ T1] Key type fscrypt-provisioning registered [ 7.653923][ T1] Key type big_key registered [ 7.705155][ T1] Key type encrypted registered [ 7.820372][ T106] "cryptomgr_test" (106) uses obsolete ecb(arc4) skcipher [ 8.499875][ T18] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6 [ 8.526331][ T29] sd 2:0:0:0: [sda] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 8.545314][ T29] sd 2:0:0:0: [sda] Write Protect is off [ 8.555292][ T29] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.603950][ T29] sda: sda1 [ 8.615826][ T29] sd 2:0:0:0: [sda] Attached SCSI disk [ 10.219386][ T1] clk: Disabling unused clocks [ 10.227495][ T1] Freeing unused kernel image (initmem) memory: 1024K [ 10.246104][ T1] Checked W+X mappings: passed, no W+X pages found [ 10.252519][ T1] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.17-1~deb12u1 [ 11.730790][ T150] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! LABEL=rootfs does not exist. Dropping to a shell! BusyBox v1.35.0 (Debian 1:1.35.0-4+b3) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)
|
kiro
Re: Pogoplug Pogo-E02 can't flash Uboot June 07, 2024 05:09PM |
root@debian:/tmp# /usr/sbin/nandwrite -s 786432 /dev/mtd0 uboot.2016.05-tld-1.environment.img Writing data to block 6 at offset 0xc0000 Written 62 blocks containing only 0xff bytes Those block may be incorrectly treated as empty!
|
Re: Pogoplug Pogo-E02 can't flash Uboot June 07, 2024 07:16PM |
Admin Registered: 13 years ago Posts: 18,800 |
Quote
1. I should plug an empty 8+ GB USB flash drive into a Linux PC, and run:
fdisk /dev/sdb
mke2fs -j /dev/sdb1
Quote
1. Format a new USB drive with a single Ext3 partition, and label it rootfs. This step should be done at Linux command line using fdisk, mkfs.ext3 (don't use GUI or gparted). Once you have booted the box, then you could try GPT partition and/or Ext4.
e2label /dev/sdb1 rootfs
Quote
4. (Stock u-boot only) Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Skip this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time, or running kwboot with latest u-boot image).
Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box (see the folder /media/sdb1/boot/dts for the exact spelling of your Kirkwood box name).
Generate the uImage with DTB embedded inside:
cd /media/sdb1/boot
cp -a zImage-6.5.7-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-goflexnet.dtb >> zImage.fdt
mv uImage uImage.orig
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-6.5.7-kirkwood-tld-1 -d zImage.fdt uImage
sync
cat dts/kirkwood-pogo_e02.dtb >> zImage.fdt
|
Re: Pogoplug Pogo-E02 can't flash Uboot June 07, 2024 07:21PM |
Admin Registered: 13 years ago Posts: 18,800 |
> root@debian:/tmp# /usr/sbin/nandwrite -s 786432 > /dev/mtd0 uboot.2016.05-tld-1.environment.img > Writing data to block 6 at offset 0xc0000 > Written 62 blocks containing only 0xff bytes > Those block may be incorrectly treated as empty! >
|
kiro
Re: Pogoplug Pogo-E02 can't flash Uboot June 08, 2024 12:52AM |
|
Re: Pogoplug Pogo-E02 can't flash Uboot June 08, 2024 02:19PM |
Admin Registered: 13 years ago Posts: 18,800 |
Quote
udev
Automount USB drives with udev rules using disk label
Quote
Samba
Samba smb.conf for a simple set up
HowTo setup Samba/CIFS shares
Samba server project on POGO-V4
Quote
NFS
NFS - HowTo set up NFS shares (and boot NFS rootfs), see also Debian 12 (bookworm) settings
Boot your Dockstar (and other plugs) using NFS rootfs, see also Debian 12 (bookworm) settings
Increase NFSD max_block_size
Reduce NFS threads
|
kiro
Re: Pogoplug Pogo-E02 can't flash Uboot June 09, 2024 12:50AM |
Quote
udev
WOW, thanks a lot! You are great guys!
I spot that transmission's behavior is kind of strange. I have set a 2048 KB/s limit, and when I add new job it starts to download at approximately that speed 1.7-1.8 MB/s. But it regularly drops to 0 KB/s. So far I was unable to understood the pattern. What I'm observing is that it downloads with about 2 MB/s for a minute or so, after that it drops to 0 MB/s for about the twice that time, then again speeds up to 2 MB/s and so on. A 600 MB file is transferring about 30-40 minutes, when it suppose to take something like 5-6 min. So far I have never use the box for other than sharing storage, so I am not aware if that is due to a hardware limitations, or misconfiguration on my side?
|
Re: Pogoplug Pogo-E02 can't flash Uboot June 09, 2024 02:15PM |
Admin Registered: 13 years ago Posts: 18,800 |
Quote
Perfornance Tuning & Benchmarks
Pogo ProV3 vs Pogo E02
Another Pogo Pro V3 benchmarks
Network performance - SAMBA - NFS (various protocols)
Pogo Pro V3 Network NFS benchmarks
Kirkwood vs OXNAS network performance (with flow control)
Kirkwood vs OXNAS network performance (flow control turned off )
OXNAS vs OXNAS network performance (flow control turned off)
Network Benchmarks for Thecus N2350 (Armada 385) and Zyxel NSA325 (Kirkwood 6820)
Network Benchmarks for Zyxel NSA310S (Kirkwood 6281) and GTI Mirabox (Armada 370)
Samba Tuning
Mount NTFS with big_writes
Increase NFSD max_block_size
Reduce NFSD threads
Quote
Memory & Swap Settings
Tuning for low RAM boxes.Also read several posts after for setups for logging to RAM.
logrotate examples
How to create and use a Swap file
|
kiro
Re: Pogoplug Pogo-E02 can't flash Uboot June 16, 2024 07:55AM |
Jun 16 05:41:41 pogo-e02 transmission-daemon[3001]: [2024-06-16 05:41:41.238] UDP Failed to set receive buffer: requested 4194304, got 360448 (tr-udp.c:97) Jun 16 05:41:41 pogo-e02 transmission-daemon[3001]: [2024-06-16 05:41:41.238] UDP Failed to set send buffer: requested 1048576, got 360448 (tr-udp.c:105)
|
Re: Pogoplug Pogo-E02 can't flash Uboot June 16, 2024 02:34PM |
Admin Registered: 13 years ago Posts: 18,800 |