shijun
Latest released kernel lost initrd.img-6.10.11-kirkwood-tld-1 ? October 26, 2024 01:25AM |
Re: Latest released kernel lost initrd.img-6.10.11-kirkwood-tld-1 ? October 26, 2024 01:02PM |
Registered: 9 years ago Posts: 462 |
Re: Latest released kernel lost initrd.img-6.10.11-kirkwood-tld-1 ? October 26, 2024 01:49PM |
Admin Registered: 13 years ago Posts: 19,014 |
Quote
https://forum.doozan.com/read.php?2,12096
Note: If this is your first time installation, then you only need rootfs Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2 (this has kernel linux-6.5.7-kirkwood-tld-1 already installed). Please scroll down to 01 Nov 2023 section for download link and installation instruction.
Quote
https://forum.doozan.com/read.php?2,12096
Updated 25 Sep 2024:
Kernel linux-6.10.11-kirkwood-tld-1 package has been uploaded. The following features were added/updated:
.....
3. And install it with dpkg. Remove flash-kernel first to avoid potential problem (if flash-kernel was not installed then you'll see some error output):
cd /boot
apt-get remove flash-kernel
dpkg -i linux-image-6.10.11-kirkwood-tld-1_1_armel.deb
....
4a. Boot with DTB file (standard way to boot FDT kernel). Recommended.
Generate the uImage and uInitrd (the kernel files vmlinuz-6.10.11-kirkwood-tld-1 and initrd.img-6.10.11-kirkwood-tld-1 were generated by dpkg in Step 3):
....
4b. Boot with DTB file embedded in the kernel image.Again, this step 4b is for stock U-Boot only.
Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box (find in /boot/dts).
Generate the uImage and uInitrd (the kernel files vmlinuz-6.10.11-kirkwood-tld-1 and initrd.img-6.10.11-kirkwood-tld-1 were generated by dpkg in Step 3):
shijun
Re: Latest released kernel lost initrd.img-6.10.11-kirkwood-tld-1 ? October 26, 2024 04:50PM |
Re: Latest released kernel lost initrd.img-6.10.11-kirkwood-tld-1 ? October 27, 2024 10:38PM |
Admin Registered: 13 years ago Posts: 19,014 |