hi,
just a couple of days i reinstalled debian via the latest instructions on the usb-stick. couple of days late ri had to install some other stuff too and after a restart it doent come up anymore... pogo boots fine and even sees my usbstick.
but whether its a warm boot or a cold boot, a reset it doesnt matter, its just not booting.
Pogoplug:/tmp$ fw_printenv
ethact=egiga0
stdin=serial
stdout=serial
stderr=serial
bootdelay=3
baudrate=115200
arcNumber=2097
mainlineLinux=yes
console=ttyS0,115200
led_init=green blinking
led_exit=green off
led_error=orange blinking
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mtdids=nand0=orion_nand
partition=nand0,2
rescue_installed=0
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi
force_rescue=0
force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi
ubifs_mtd=3
ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params
ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi
usb_init=usb start; if ext2load usb 0:1 0x800000 /boot/uImage 1; then setenv usb_device 0:1; setenv usb_root /dev/sda1; elif ext2load usb 1:1 0x800000 /boot/uImage 1; then setenv usb_device 1:1; setenv usb_root /dev/sdb1; elif ext2load usb 2:1 0x800000 /boot/uImage 1; then setenv usb_device 2:1; setenv usb_root /dev/sdc1; elif ext2load usb 3:1 0x800000 /boot/uImage 1; then setenv usb_device 3:1;setenv usb_root /dev/sdd1; fi;
usb_device=0:1
usb_root=/dev/sda1
usb_rootfstype=ext2
usb_rootdelay=10
usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params
usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot;
usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi;
bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset
ethaddr=00:10:75:1A:CF:3B
Pogoplug:
pls advise
thx tom